Tommy's Trade Secrets - How To Plaster A Plasterboard Wall Part 1

Magical Mirrors
232 followers
8 Video Views·Nov 17, 2022
Hi, welcome to Tommy's trade secrets. This short clip is all about plastering and how to do it
right. So hopefully you'll find it useful. Take a look at the step-by-step guide and if you like it
print it, keep it and of course use it. Hi my name's Simon, I'm from tradesupermarket.com and
today I'm going to teach you how to plaster a plasterboard wall. So the tools needed for this
job are a mixing bucket, a couple of builders buckets, a hook, a trowel, a spray bottle, a bucket
trowel, a large brush, a tape measure and some snips if you've got your beets to cut, a stainless knife,
some scrim and a small two inch brush to run the corners in. Right okay so first things first we're
going to want to screw up all our joints on our screw holes. So starting in the corners
you're going to make sure you've got an even span of tape on either side
and try and keep it all in one go. Now what you want to try and steer clear of
is overlapping the scrim tape. So we'll keep it nice with only one single piece at a time on that.
Okay so now it's time to knock up our plaster. You can get ball finish for this but I'm using
malt finish and it would be a good idea if you get anyone to help you but I've got to do it on my own so
Right okay so you want to scrape around the edges of your bucket trowel
so you keep it a nice consistency and get rid of all your lumps.
Right so give it one more final go around with your bucket trowel
then one more final mix and you should be ready to go. Right okay so I've given our tools a bit
of a wet down just so the plaster doesn't stick to it too much. I'm going to load up with about
two scoops of plaster. Now I'm right handed so I'm going to start in the left hand top corner
and work my way across the top coming about halfway down. The tricky part sometimes is getting
the plaster onto your trowel. To do it just fill it up a little bit like that
and give it a nice even spread with your trowel about half an inch away from the back edge of
the wall like that. Right okay so we're just going to let that pick up for about 10 to 15 minutes now
and then come back and give it a flattening. Right okay so let this pick up now for about 10 to 15
minutes so now what we'll do is give it a little flattening which is basically just getting rid of
all our lines and filling up any sort of hollows that we've got in the wall which will make it
easier and nicer for the second coat to go on. Same again starting from the top left corner
I'm going to work my way from the top same sort of angle on the trowel
just making sure that everything's covered and ready for the second coat.
You just want to take nice long strides so you end up with a nice flat surface.
I hope you found that useful. Now click below to find all the tools and materials you need for the
job. There are products from loads of merchants all at the cheapest prices on the web. Thanks
very much for watching Tommy's Trade Secrets. Oh would you mind rating this video and spread the word.
