Wakesurf Shaper Concave With Velcro Instructional

Ronix Wake
10 followers
4 Video Views·Nov 15, 2022
Hi, I'm Nathan. I'm from Dallas, Texas, and I'm the creator of the Wake Surf Shaper.
Congratulations on your purchase of the Revolutionary 8.3 Surf Shaper.
Please refer to the diagram included in the enclosed manual on how to install your Wake Surf Shaper.
Step 1 is to clean your boat.
Make sure your boat is out of the water and completely dry.
Locate where the Wake Surf Shaper will be placed on your boat.
Clean your boat's port and starboard sides with alcohol swabs or any non-residue surface cleaner.
Step 2, apply the Velcro.
First, apply the bottom Velcro strips to the lowest rear point on the gunwale of your boat.
Make sure the Velcro is perfectly level.
After you've applied the bottom Velcro, use the template provided in your kit to apply the top strips of Velcro.
For maximum bonding, the Velcro needs at least 24 hours to dry before immersing in water.
Use shims provided to ensure the Shaper is plumb with your boat.
Certain boat hauls may require you to use one or both of the included shims.
Place the Wake Surf Shaper forward on the strips of Velcro for a longer wake and move further back for a steeper wake.
Make sure it is in full contact with the Velcro provided.
Enough with the install, let's go liberate your surf wake.
Weight your boat evenly, but make sure not to exceed Coast Guard regulations on the placard in your boat.
Apply the Wake Surf Shaper to the opposite side of the boat that you want to surf on.
To remove the Wake Surf Shaper from your boat, simply push down on the top of it.
If you used the shim to level the Shaper, make sure the shim released as well.
If it didn't release, simply pull on the provided rope.
With the Surf Shaper removed, you are weighted and ready for wakeboarding or kneeboarding, or simply head in for the day.
Please note, hauls are designed different, which does affect the wave, so be patient in creating your own custom wave.
For your safety, you can only use the Wake Surf Shaper on inboard boats.
Now that you've created the perfect custom wave, remember, have fun out there.
