Land Rover Wheel Wobble Won't Go Away | Land Rover Do-Over Land

ShiftyDrifty
14 followers
14 Video Views·Nov 13, 2022
Hi everybody, I'm Mark Wallace and recently I bought a 2011 Land Rover LR4 that I plan to
convert into an overlanding vehicle. I talked all about it in the premier episode of Land Rover Do
Overland. It's a fun little series that's all about adventure in a 4x4 vehicle. So in this
episode what we're going to do is I'm going to focus on the things that have happened mechanically.
If you're into more of the adventure and the experience of travel this episode might not be
for you but hang on we're going to have more of that adventure stuff coming up in a few days
right here on Shifty Drifty. So what I want to do again I want to focus on the mechanical stuff
that has happened and so before I start I need to explain that I bought this car sight unseen
when I was in Colombia. So I worked with a reputable dealer here in Arizona. I knew that the
Land Rover had some issues mechanically. I knew it had high mileage. I knew I was going to have
to do some things but I got it for a steal at $10,000 bucks all in tax title tags the works
and so since I'm on a budget that was okay with me. So when I flew into Phoenix and I picked up
the vehicle and I headed out on the freeway I immediately noticed one huge issue and that is
it has a huge front end wheel wobble almost like an old Jeep Grand Cherokee death wobble kind of
and so I knew I needed to fix that but I didn't know what else needed to be fixed on the vehicle.
I'm not a mechanic and so what I decided to do was first get the car ready road worthy so fix
all the mechanical issues and then the second thing I wanted to do was to begin the conversion
into the overlanding stuff. So that was all the off-road tires, the road, the roof rack,
the rooftop tent, winch you know all that kind of stuff. So that would come second. First I
needed to get the car road worthy and so what I decided to do was to fix the wheel wobble and fix
anything else and because I didn't know what anything else was I took it to the experts down
at Roventex here in Scottsdale Arizona and so what they did was they did a complete safety inspection
and based on that inspection they did a few things and they also told me that there were some things
that they thought were causing the front end wheel wobble. The front rotors were warped so they
were wobbling around and also the tires were mismatched and so what I needed to do was fix that
and so I did. I replaced the rotors with some really high-end EBC rotors and that fixed about
80 percent of the wheel wobble and I was pretty okay with it. You know I thought okay a little bit
is not so bad so I was thinking this is ready to go I can start going off-road and so what I decided
to do was get some terra firma steel wheels and 30 millimeter spacers so that allowed me to get
some little bit bigger sidewalls because those are 18 inch wheels but as soon as I did that then
everything changed the geometry of the car changed and that wheel wobble became even worse than it
was with the street tires and so that launched an entire I don't know series of events I'm not
going to bore you with what we did with me going to different mechanics and different dealers and
talking to people online and trying to get that wheel wobble fixed but I will tell you what's been
replaced so far the upper control arms the lower control arms the cv joint and the axle on the
driver's side all of that has been replaced it's brand spanking new it did help significantly on
the wheel wobble but it's not solved there's still a wobble a slight wobble at freeway speeds and I
have to fix that and so what I decided to do after looking on the interwebs and talking to people
I just became convinced that the problem was with the front wheel hub assemblies and so I thought
well the geometry of the tires is putting stress on the wheel bearings it's causing some issues
and there were some weird noises and I thought that's got to be what it is and so I ordered the
parts and I hopped in my garage and here's what happened next all right I'm trying to see if this
wheel hub here is loose it doesn't you can't really tell if it is or not so my theory is one
of these is bad and that's what's causing the the shake and the wobble of the wheel this is day two
I have my breaker bar I'm trying to take the uh the wheel nut off the axle nut and with this guy
there's just no way I don't have enough mojo to get this done it does not break loose
so um actually I did this all last night and just no luck so this morning I had to go get
an impact wrench now I have the big gun and let's see if this is gonna do the trick
right off I think I cranked on this thing last night for half an hour this literally was 10
seconds wow okay good investment all right now the hard part is getting this off of there it
looks like it's already coming off holy crap this is gonna be much easier than I thought
I just pulled this right off it doesn't seem bad yeah this wheel hub doesn't seem bad at all
which is sort of sad because this is what I thought was a culprit okay time for the new part
the wheel hub assembly is now on I have torqued all the bolts and the wheel hub nut has been put
on torqued and then I've chiseled in the key hook the keyway there so it's not going to come undone
but um this does move a little stiffer than the old one here's the old guy that came off
there um it's pretty loose comparatively and you can see there's lots of junk coming out of there
and then when I took this out there's just a lot of rust and stuff so I don't know that that was
bad necessarily it's not obviously bad but um we'll see we still haven't done the other side
and worst case scenario these guys were about 500 total shipping and everything um and so it's just
sort of a nice piece of mind to have that you know that you have good wheel bearings and nothing's
going to go wrong down the road so even if that doesn't solve my wheel wobble it certainly hasn't
hurt anything so once we're done with this um then we'll check it out the wheel wobble is gone great
if not the last thing to replace is the are the tie rods and there's nothing else that holds these
together really so everything else has been replaced all right I'm going to put the rotor
on and then seal this up and then we'll do the other side and take it out for a test spin
all right the other side was pretty straightforward the wheel hub assembly just came right off but
on this side uh the axle is really old and so the axle is seized on to the wheel hub assembly
so um I'm gonna have to hammer this off so I've rented a tool this is a slide hammer
and it bolts onto this thing and then this could take a couple of whacks or it could take five or
ten minutes I don't know but it's on there all right here we go and there we have it oh lots of
rust lots of rust okay the wheel hubs have been replaced and so now what I'm going to do is take
it out on the freeway and see if it fixes the wheel shake I don't know if it's going to make
any difference because the old wheel hubs seem just fine at 50 smooth as butter 60 65
got a tiny tiny shake yeah you can see it in the steering wheel still there still shakerama
upper control arms replaced lower control arms replaced cv joints axles replaced rotors replaced
wheel hub assembly replaced the only thing it could possibly be now is tie rods motor mounts
I don't know well obviously that didn't work out and so I think the next step is to replace the
inner and outer tie rods I've already ordered them but they're on back order so we'll have to
see what happens I don't know in a week or two if you want to see what happens and if adventure and
traveling and going to different places and seeing different countries and cultures if that's your
thing then make sure you click subscribe and turn on the bells this isn't just about building and
wrenching and getting greasy it's just this is definitely a channel that's more about experiencing
things so if you're into that please subscribe and if you'd like check out my support community
I've got a patreon site that's all about building community so if you have ideas and suggestions if
you want to get more information if you want to know specifics about places that I've been on my
around the world trip if you want to see some videos that will never hit youtube if you want to
see more information that maybe the general youtube audience isn't interested in well the
patreon site is for you there are different levels you can get in at a very very low level or if you
want swag and all the different benefits and zoom call and one-on-one meetings well there's a zoom
I mean there's a tier for you as well so check that out I really appreciate everybody that's
been helping out so far I really couldn't do it without you so thanks so much for subscribing
thanks so much for watching and I will see you on the next episode of the Land Rover Do Overland
