How to sew a tulle skirt (very easy tutorial !)

QYR
32 followers
61 Video Views·Nov 10, 2022
Hello everyone and welcome! In this tutorial we are going to sew a tulle skirt for a little girl.
It's going to be very big and full, a little bit rock and streetwear if you will, and because it
has no lining you can sew it very quickly even if you are a beginner. It can be worn as a top layer
skirt with shorts beneath it or leggings which is perfect for little girls who love running outside,
climbing trees and go on adventures all day long. For this tutorial I have decided to use this
amazing tulle. It's colorful and shiny and fun plus it has glitters. And to make the belt I picked
this really simple bias fabric. Three or four meters of tulle and three meters of bias are
enough to make this project. Then if you wish you can always add decorations like charms, pearls, lace and so on.
So let's start with the pattern. It is really simple, it's just a very long rectangle, a very
long stripe of tulle that we are going to gather to create the base layer of the skirt. The width
of this stripe corresponds to the length that you wish for your final skirt plus about 1.5 centimeters
for your sewing allowance. The length of this stripe corresponds to how much fabric you need
to obtain your waist size once gathered. Usually when we buy tulle the width of the fabric roll
is about 140 to 160 centimeters and we are going to keep all of it for the length of our stripe.
Now that we have the length I'm going to measure and mark the width of my stripe. Remember it is
the final length of the skirt plus 1.5 centimeters of sewing allowance. Then you can cut your stripe.
Be careful not to cut your pins. And because we have our scissors in our hands let's cut three
additional stripes of tulle. If you wish to create a very big and very poofy skirt you can even cut
more stripes. We are going to gather our first stripe starting with a few securing stitches.
Now to gather fabric there are a lot of different methods. Today I have decided to show you a way
that might not be very academic but it is quick and efficient for beginners. This technique does
not require any additional explanation than what you can see on the screen. You just have to gather
the tulle with your hands right before it goes under the presser foot of your sewing machine.
The length of my stitch is slightly longer than usual. I have set it to 3 or 3.5 which is good as
well. Once we have gathered enough tulle and we have obtained our waist size we can make a few
securing stitches and cut our stripe. If you don't have enough length you can just add the second
stripe following the first one until you get the right measurement. Both stripes will overlap on
about four to five centimeters and then we keep on gathering our fabric just like we did before.
Now that I have the right size measurement I can make a securing stitch to secure my gathers
in place. I double check if my waist size is correct flat at the table which is easier and
I cut the excess fabric. It is time to add some peps, some volume, some fantasy to the skirt.
Remember we have cut several stripes of tulle fabric. It is time to use them. We are going to
have a little bit of fun by cutting out a lot of fabric scraps. They can be squares or rectangles.
Actually you can try out many different shapes and then we can gather them just like that.
When it is done we are going to place them on top of the underskirt and pin them at regular
distances. The more you add the fuller and bigger your tutu skirt will be. Then we are going to
stitch everything in place with a straight stitch. We follow the first seam as a guide which means
that we stitch on top of it without forgetting to make securing stitches at the beginning and the
end. I promised you a quick and easy project today, something special for parents in a rush
and because I can see the time passing by quickly let's move on to adding a belt. First we need to
cut the excess fabric there and then we can prepare our bias or any kind of ribbon you might have at
home today to make the belt. My tulle is full of colors therefore I have decided to use a block
colored bias to create a nice contrast. First I measure about 30 centimeters, 32 for me today to
be precise. I place a mark with a pin and then I go on measuring the waist size. It's 55 centimeters
for my little Mia. I add a new mark there with a pin and then I measure again about 30 centimeters
before cutting my bias. The 30-ish centimeters on each sides of the waist measurement will allow us
to tie up the skirt around the waist and make a cute little bow. Oh and before I forget we will
also need a second piece of bias with the same length. Now we are going to place the bias on the
skirt. I align it with the waist seam and I pin it. Take your time, your waistband should be very nicely
placed if you want a really nice looking finished project. So you want to make everything nice and
neat. I decided to leave the gathers here on the sewing allowance side because I like the look of
so they will go beyond the belt but feel free to cut them short if you prefer of course. When it is
done we are going to turn our skirt on the wrong side and pin the second piece of bias in place.
If you wish to add a lining to your skirt do it right now before pinning the second bias.
For my own skirt today I have decided to go without lining since I imagine it would be sort
of like a costume, a little fancy extra something that a little girl would put on quickly on top of
shorts or leggings before running to the trampoline and having fun with her friends.
So no lining for little Mia today. Of course we're going to hide the edges inside as we sew the bias
together and that's actually what we're going to do right now. We are on the right side of the fabric
again and we're going to stitch our bias at about one or two millimeters from the edge making sure
to stitch in every single layer of fabric at a time. Both bias pieces should be properly aligned
music down for a minute because we are not done yet and because this is not a Jane Austen movie
right homie? But we are almost there I promise. We just have to fold all of these gathers wrong
sides together which will create the skirt. Now we can place one edge of the foundation layer
on top of the other. They overlap on about one or 1.5 centimeters and we can make a quick row of
straight stitches making sure to leave that is really important about seven or eight centimeters
at the top to be able to put the skirt on of course. Now you can make a quick straight stitch
with a machine or if you are just like me a bit of a control freak, I mean a perfectionist, you can
make a few invisible stitches by hand with an invisible thread. Voilà dear friends this is the
end of this tutorial. Are you going to sew your own skirt? Let me know in the comments what you
think about this tutorial. I truly enjoy reading your messages. Bye bye! A bientot!
