This is how I designed and built my first black soldier fly larvae box. The main design feature of the bin is that the entire bottom drains! I did this in hopes that it would alleviate some problems like anaerobic conditions I have seen talked about in other bins. I'll walk you through my thought process and how I built it in this video. Popworms: Code expired
********************************************************************* RECOMMENDED READING FOR SMALL FARMERS & GARDENERS: Mel Bartholomew's "Square Foot Gardening" - Great for beginner gardeners - http://amzn.to/2ErtZOu Toby Hemenway's "Gaia's Garden" - For everyone, learn ecology, soil building, permaculture, holistic garden design- http://amzn.to/2srS0PT Masanobu Fukuoka's "The One Straw Revolution" - Inspirational book, Introduction to natural farming/philosophy - http://amzn.to/2Et69BM JADAM Korean Organic Farming: https://amzn.to/2V8bxye
-These are for farming/growing techniques and business/sales/marketing/operations strategies: JM Fortier's "The Market Gardener" - http://amzn.to/2GdYgfY Curtis Stone's "The Urban Farmer" - http://amzn.to/2Hg7AkM Ben Hartman's "The Lean Farm" - http://amzn.to/2HhetlZ
********************************************************************* 🌟MUSIC BY: Funk City by Reatch https://soundcloud.com/reatch Creative Commons — Attribution 3.0 Unported— CC BY 3.0 http://creativecommons.org/licenses/b... Music promoted by Audio Library #bsf#chickenfood -Some links above provide commissions.Credit: Nature's Always Right
Hey everybody, welcome back to another Nature's Always Right episode.
Today is going to be all about how I built my soldier fly box,
the design of the box, and all the features of it.
There's a lot of great designs online other people have built,
and this is kind of a combination of some other designs, some of my own ideas.
So this box is built into two pieces, the stand,
and then the box itself where all the compost and the larvae are.
This is where the drainage is, and this is the main feature of my box.
That is different from some of the other designs online.
So the entire bottom of this box here has a layer of weed mat
so that it's able to drain very easily and prevent any anaerobic conditions.
This is version one of this box.
I'm going to make a version two probably for next season after
I've ran this thing for two years now.
I've learned a lot of lessons from it, and I'm going to make it better.
So just to quickly show you guys, so this is an extra incubation bin for them.
Just filled with compost.
The actual flies themselves will go down in here and lay their eggs,
and you can see a lot of the leftover shells after the larvae have pupated.
So that's what that is.
This top bin here, this is of course where the soldier fly are and where they eat.
It's now almost winter, so they're really slowed down.
They're not really eating too much anymore,
and the bin's going to be shut down for winter.
This is the latest model of my ramp that needs to get even better for next year.
It might be hard to see, but down there is where the weed mat is, and it all drains through.
So basically the whole bottom of this thing is able to release water,
and that was the kind of the main design feature.
And if I was going to change something,
so for next year I'm going to use a stainless steel mesh bottom,
and I'm hoping that that will just, you know,
it's going to of course going to last a lot longer,
and I'm hoping that it will drain even better
because the weed mat, although it still drains decently,
now that, you know, a year's worth of material and frass has built up,
it is harder for the water to drain through because it's,
you know, some of the materials clog those holes.
Or the other option would be to clean this thing occasionally,
like shoot some water and then try to drain it through,
or try to shoot water at the bottom to unclog some of it.
So these are some of the little kinks that I'm working through.
So I hope you guys enjoy seeing how I built this,
and how I thought about designing it,
and I'll give you guys some different tips and things about the box,
and facts about the larvae as we go through the video.
Today I'm going to be building the box that will be built on top of it.
Everything that I'm using on this project is just old lumber,
or things that I've recycled or collected.
Here's the plywood I'll be using for the actual box
that will contain the compost and the soldier fly larvae,
and that box is just going to be placed directly on top of this table.
All right, so my next step is to sure up these corners.
I did a pretty good job of fitting this in very snugly.
I had to beat it in with a rubber mallet.
As you can see, it's pretty tight,
but we need to make this super tight.
I don't want any larvae to be able to escape.
So what I've done is I've cut out a 19 inch piece.
It'll allow me to, you know, cinch up all this wood, get it super tight.
As you can see, it's going to be raised up a bit,
and my lid will sit on top,
giving an inch gap for the soldier fly to enter.
So I'm just going to go ahead and finish cutting out the rest of the leg pieces here,
and then the piece I'll need to create is the lid.
So as you can see, there's just a little bit of a gap here.
So I'm just going to bend the wood.
I'll be drilling pilot holes to prevent any splitting of the wood.
I'm going to mount it to this board first,
so that I can mount it forward and then drill it in from the side.
All right, so the next step is to add the hardware cloth.
So I'm a little worried about the strength here in the middle over time,
once this metal starts to corrode a little bit.
So I've got some of this extra hardware cloth anyways.
So I think I might just do a double layer here like this.
So for drainage, I'm going to be using a weed mat.
I got the cheapest kind, which actually has the largest holes in them.
And it says to put the glossy side facing up for the best drainage.
So, you know, usually this is used in landscaping.
Finally just had a breakthrough.
I've been pondering on how to create this for a long time,
a couple weeks, and I finally figured out a good solution.
This box is upside down.
This is the bottom.
I need to keep the soil from falling out.
I also need to keep any baby larvae from trying to escape or crawl out.
So how do I do that so that it's super tight, the moisture can drain easily,
and it's supported?
I also wanted it to be easily removable and replaceable if need be.
You know, I thought about putting a layer of this weed mat, then a layer of this.
I thought about putting the weed mat and the hardware cloth just on the table itself.
All those different ideas had different pros and cons,
none of which gave me easily removable, easily replaceable, and a super tight seal.
So I just had a breakthrough.
And my idea now, I'm going to build out a frame that will go along the entire bottom.
And this frame is going to act as a tightener on the weed mat.
So basically, I'll just cut out a perfectly sized piece of weed mat.
I'll lay my pre-built frame out, and then I will screw it down.
Screwing it down is going to create an incredibly tight seal.
Also, part of this frame will be the hardware cloth.
The hardware cloth will sit on top here and provide support for the weed mat
so that when the soil is laying on top, it doesn't rip or tear.
So when I need to, let's say I need to replace the weed mat, my drainage source,
I would just unscrew my frame,
and this entire piece will just come off as one thing like this,
and the weed mat will just be loose.
I just take the weed mop out, put my new cut piece in here,
lay the frame back on top, screw it in again,
and boom, it'd be really quick to replace it if need be.
And then maybe this one's still functional.
You can rinse it off, dry it out, get it clean, put it back in,
put the frame back on, screw it back in.
Here's what we have.
We have my weed mat, and right underneath is the hardware cloth,
and that's going to be able to take a lot of pressure.
Oh wow, it's a ton of water.
It just drains no problem.
That's a good sign that this is going to have really nice drainage.
So now I'm going to be attaching the supports,
which are going to attach to the hinges, and then the box and the lid.
For the supports, I'm using a piece of two by three and two inch number two screws.
So what I'm going to do now is line up these support boards.
This hinge will rest right in the center here.
So you can see how I did it.
I have a nice lid.
The first thing that I need to do is actually build the collection bucket
where the soldier fly are going to dump into the ramp.
The reason I need to set this up first is that the height that I make this
is going to help me determine where I drill the hole in the box and all of that.
So this is the key piece.
So we're going to set this up first.
Now this is a three quarter inch, 45 degree angle PVC fitting.
So this is just going to be like a nice big funnel that fits on this perfectly.
Here's my homemade funnel.
Okay, so now you're looking from inside the coop and I need to cut out a section of this metal,
shove the pipe through, and then we'll cut it to length once the system's fully built.
So there's our pipe at a really sharp angle.
It's going to drop them out real fast.
And I'm going to leave it really long because I'm still playing around with my ideas about
how I'm going to collect them or maybe just have them drop directly onto the ground here.
And then when the chickens wake up in the morning, they'll have a huge feast on the ground.
Maybe they'll crawl out.
I'm not really sure what's going to happen.
Maybe I want to collect them and disperse the food how I want to.
Maybe I want to freeze some for later.
You can actually freeze these for long-term storage for the birds.
Also, I could save the larva to throw back into my inoculation box
so that they can pupate, become flies, and then hopefully lay eggs again back into this box.
And then we'll have a circulating natural population living here
that as long as I keep feeding the box, they'll continue to produce the larva,
they'll continue to come out here,
and then I'll occasionally collect them to throw them back in this box as an emergency backup.
All right, so check it out.
It turned out perfectly, actually.
It fits in there really snug.
And then just to reinforce it, I'm going to put one of these on.
This is just a three-quarter inch bracket that you can buy for any PVC fittings.
It's going to strap on there.
I'm just doing this just in case.
So I know it's not going to move around at all.
There's no way it can go anywhere.
So now we just need to set up the ramps.
All right, guys.
So now I'm going to show you how I'm determining the length that I'm going to cut my ramps.
And basing that on the angle that the ramp is going to be.
At this angle, obviously, I could go straight...
I'll be slightly lower to be on top of this.
But it's about at 30 degrees.
So now I can actually see how short I can make this.
I don't want to go beyond 45 degrees.
Okay, so the ramps ended up being, it says 29.3.
And then this one, 38.5.
So this is a nice test, right?
We got something a little under 30, something a little over 45.
And I'm going to support it once again with some of these three quarter inch.
Or maybe I'll just put a screw in and then I'll just hold it there.
Another option I've seen people do for ramps,
they'll cut maybe like one or one and a half inch PVC in half.
And then it's just like a semicircle, just nice ramp.
You could use...
There's a lot of different things you could use.
But I'm real hopeful that this is going to work.
Those drop right into there and into the hole.
And then out straight to feed the chickens.
Or I can collect it in a bucket.
In case you're wondering, this thing's called a digital angle finder.
And I use this to set my solar panel angle.
And then as you just saw, to find angles of other things,
it's pretty cool because there's a magnetic strip in the bottom.
So that's how I was able to stick it to the metal.
You know, I think it's around 20 bucks or something.
I'll put a link to the description in the bottom of the video.
Okay, so my original ramp system was not very good
because there was only one access point from the side.
So now I've switched it so that as long as they come this direction,
they're going to hit this ramp and then be pushed into this corner.
Now there's some different variations that may happen.
They may crawl up the sides here and be able to get out.
You know, I may need to put another blocker that leads them there.
But I think it should be okay.
And they should drop right in.
I've moved everything that was under here to the other side.
And there's not really any way for them to get underneath now
because I jammed this board up against.
I checked the angle.
The angle of this board is 38 degrees,
which should be good because 45 is kind of the max for them.
So we'll see what happens.
There's a ton of them in there.
And I'll feed them some new food.
Hopefully we can attract some more fresh larvae.
If you would like to order dried soldier fly
for your chicken or other animals that you can feed directly,
or if you'd like to buy live larvae to start your own box,
be sure to check out popworms.com using the code NATURE
to get 25% off of your order, off of anything in their shop.
Soldier fly are just a way better larvae that you can feed your chickens.
They've got like way more calcium than mealworms.
And if you're interested in a lot more detailed information
about the black soldier fly and how to get a box like this started,
be sure to check out my video about starting a soldier fly box.
And I'll give you guys a ton of information about that.
I'm also going to put some other links to some other soldier fly videos
that I really like and that really helped me learn about them
and helped me design my box.
So big thank you to all the YouTubers out there
who helped me learn about the soldier flies
and how to raise them and everything.
All right, you guys have a wonderful day in your garden
and with your soldier fly and your chickens.
And I'll see you guys in the next episode.