Using Alpha Lock, Clipping Masks, and Layer Masks in Procreate // Procreate Deep Dive: MASKS

Tech Center
27 followers
6 Video Views·Nov 9, 2022
Hi, I'm Lisa Bardot and today we're going to learn all about how to use
and manipulate masks in Procreate. In this video you'll learn the three
types of masks in Procreate, the differences, and when it's
appropriate to use each one. If you're new to Procreate, I'd highly
recommend checking out my Intro to Procreate tutorial.
We all know masks are used to cover things.
If you've ever painted a room, you might be familiar with masking tape.
Basically it's tape used to cover something so you don't get paint on it.
Masks in Procreate work this same way but are so much more functional and
versatile. Masks are a non-destructive way to hide
or modify the contents of a layer. In Procreate, masks come in three flavors
alpha lock, clipping masks, and layer masks.
Choosing which of these methods to use at any given point depends on several
factors. Are you worried about your layer count?
Do you need to use blend modes? Is it important that you can make
non-destructive modifications? I promise all of this will make sense by
the end of this video. Here on my canvas I've drawn a leaf
shape. I'd like to add some details to it but I don't like
how here the lines extend past the edges of the shape.
If this were a real painting, I'd have to very meticulously paint up to the edge
being careful not to go over. But we're working digitally and things
are much easier. Let's use alpha lock to draw those line
details. You can enable alpha lock from the layer menu
or by swiping right with two fingers. You can tell alpha lock is on if you see
a checkerboard pattern on the layer preview.
With alpha lock enabled, anywhere you haven't already drawn on that layer
becomes your mask. It means that you can only draw or make
changes to the pixels you've already drawn on.
There are some downsides to using alpha lock however.
The more you use layers the more you're able to follow a non-destructive drawing
workflow. All non-destructive means is that I'm
able to avoid making changes to my drawing that are irreversible.
I've added these lines now but I can't easily go back
and edit the texture or color of just the leaf.
Alpha lock is really quick and easy to use but it would be much better if these
two elements were on independent layers. Enter clipping masks. Let's draw a new
leaf. This time to add our detail let's create
a new layer. Tap on that layer and tap clipping mask.
Notice the little arrow pointing down to the left of the layer preview.
Now just like before I can only draw on the parts of the canvas that contain my
shape but this time those details are on a
new layer. This new layer is using the layer below
as a reference to make the mask. This gives me a lot more control.
I can erase, change the opacity, make adjustments,
enable a blend mode and more. I can even go back to the reference layer
the leaf shape and edit it as well. I can also keep adding more clipping masks
one above the other and they'll always be mapped to that
first reference layer. Clipping masks are awesome but the
downside to clipping masks is that you are adding to your layer count which
might present a problem down the line if you're running out of layers.
Finally we come to layer masks. There are a lot of ways to use layer masks
and I'll go over as many as I can. To create a layer mask make a new layer
tap it and choose mask. You'll see your original layer. This is
where you put your artwork and above it a layer filled with white
called layer mask. The layer mask lets you hide or show
parts of the artwork layer. In the artwork layers let's draw a leaf.
Now let's edit the mask layer. Tap the layer mask.
When you are editing the mask you can only use black,
white or shades of gray. I've heard a few cute phrases to help folks remember how
editing masks works but here's mine. White's a window, black blocks.
Right now the entire mask is white. You can imagine white being clear
like a window to what is on the artwork layer. If we paint on the mask with black
you'll see that black blocks or hides what is on the artwork layer.
You can always go back with white and paint it back in.
If you paint with a shade of gray the mask will be semi-transparent.
Now this is a lot of technical information so I think the best way to
learn is by putting this all into practice.
I'm going to walk you through the process of a drawing so that you can see
all the ways we can use and manipulate masks.
This year I started Making Art Every Day, a year-long series of prompts, tutorials
and motivation to help people establish a daily art making practice.
I've been sending out daily prompts once a week and this week we're drawing
houseplants so I thought it would be fun to show you
how I draw a fiddle leaf fig tree. Over here in Safari I've got
makingarteveryday.com loaded up. This page has all the prompts for the
weeks with a google image search linked to each one for easy access to
reference photos. And I'm observing all these images but
I'm gonna pull one up and just leave it on the screen
so I can just refer to it as I'm making my own tree.
We're gonna start this drawing out with just a basic sketch. Sketch out the pot,
add in the branches, and then we're going to start adding the leaves.
These fig trees have really cool leaves. They're kind of like pear-shaped
and a little like wavy and wonky so I'm just going to go ahead and draw
a bunch of leaf shapes all over the branches. And I want to be sure that some
of the leaves overlap. Some are kind of facing
forward, they're a little more foreshortened.
That's going to lead to kind of a more realistic look while still keeping it
fun and stylized. I'm pretty happy with this sketch so
next I'm going to reduce the opacity of that layer
and then I'm going to turn on the multiply blend mode and this is going to
help me be able to see my sketch lines a little bit better.
I'm going to create a new layer and place that layer below the sketch layer.
For this drawing we're going to use brushes from my gouache paint box set.
I'm going for more of a painterly look with some fun texture so this one will
be perfect for that. I'm going to start with the pot. To make
the pot shape I'm going to use my gouache thick brush and I'm just going
to fill in the entire shape of that pot. Now I'm going to create a
new layer and I'm going to make that layer a
clipping mask. I'm going to grab a lighter color and
then the dry round brush and just kind of added
some curved lines to give it a little bit of contouring and a bit of texture.
I'm just playing with kind of lighter and darker tones until it looks
how I want it to look. Then I'm going to grab a darker color so that I can color
the inside of the pot and then I will create a new layer to
make the lip the top lip of the pot. I'm going to
use the gouache thick brush again and then draw
kind of a line around that to make that light colored lip.
I'm going to turn on alpha lock on that layer just so I can add a little bit of
texture to that. The pot looks pretty good but it looks a
little wonky on this side so I'm going to go back to
the original pot like shape layer and then just erase
away some of the edges. Kind of play with that a little until
I get it looking how I want it to look and that's kind of the beauty of
working with clipping masks is that you can go back and edit things still. You're
not committed to a certain shape or thing that you did.
And we got to add some dirt in the pot of course because it would die without
some dirt so we'll just add that in on a layer in
between the lip and the pot. Now we're ready to
start drawing the branches so we're going to do that on a new layer.
I'm using the gouache thick brush again because it has some really nice thick
and thin so I'll start up thin near the top of the branch and then go
thicker as I draw it towards the bottom.
Now we want the trunk to look like it's actually in the pot so
we're going to erase the bottom of that and then I'm actually going to select
that lip layer so that way I can exactly erase the
right amount of that branch or trunk. Now I'd like to add some
texture to my tree so I'm going to turn on alpha lock.
I'm going to select the dry round brush and then just add in
a little bit of texture using some lighter and darker
colors. Alright we're ready to add the leaves so let's create a new layer.
I'm going to choose my green and then the gouache thick brush
and then I'm going to go in and just outline and color
in each of the leaf shapes. I'm not going for perfection here I kind of like
it to be a little irregular especially so you can see kind of the brush marks
of that gouache brush but the most important part right now
is to make sure that none of my leaves overlap. We're actually going to put
any of that overlap on a new layer so let's go ahead and finish up this layer
and that looks pretty good. I'm ready to add my second layer so I'm going to
create a new layer underneath the previous layer and I'm
going to reduce the opacity of that first leaf layer
and I'm doing this just so I can see a little bit better as I'm adding in these
these new shapes. So go ahead and color in all the leaves on that layer.
Again we don't want anything to overlap. Cool that's all done.
Now we're going to go ahead and add in the veins of our leaves.
Create a new layer and choose a lighter green
and the brush I'm going to use here is the dry detail brush. It's a really great
textured brush perfect for line work and we'll just start
adding all those little veins on all the leaves.
The next thing I want to do is add some shadows so that these leaves look like
they're underneath the other leaves. Now I want to use the multiply blend
mode to do this because it does shadows really well
but clipping mask isn't going to work because it's not directly above the leaf
layer. So what I'm going to do here is create
a layer mask. Select the leaf layer create a new layer
and then turn that one into a mask and as you can see
it makes a mask out of the shape of the leaf layer because that's what was
selected when I created that mask. Turn off the select tool and then we
can turn on the multiply blend mode on that layer.
Then I'm going to grab the gouache dry brush and draw my shadows
and then if we turn back the opacity up on the top leaf layer now we can kind of
see you know how those shadows are falling
and because we're doing this on a separate layer with a mask we can go
back and edit those shadows if we need to.
All right I'm going to create a new layer above the top leaf layer and then
I'm going to add in all the veins for those
and now I'm finally ready to turn off my sketch
and I can see this is coming along but I want to give this a little bit more
definition. So I'm going to choose my leaf layer
I'm going to turn on alpha lock and choose kind of a darker green
and I can go in and kind of just darken the centers of those leaves.
I'm using the super dry gouache brush which is going to give some really nice
subtle texture. I'm going to do the same on the bottom
layer as well and again if I had drawn those veins
directly on the same layer as the leaf I wouldn't be able to do this so that's
why working with separate layers and using mask is awesome.
I'm just going to go in and adjust my shading a little bit.
Looking pretty good but it's still a little flat so I'm going to add another
little detail. I'm going to do this on the leaf layer
itself. I'm choosing a darker green and then my dry detail brush and I'm
just going to go in and add kind of some little wavy lines
all along the edges of each leaf. Also make sure to darken the underside of
those leaves that are kind of like turned up
turned up turned over folded up. These little wavy lines to me this is
kind of a stylistic choice but I like these little wavy lines because
the edges of the fiddle leaf fig tree leaves are
kind of wavy so that's why I'm putting those in.
It gives the impression of a wavy edge. So I'm going to go in and finish up doing
those all over. Then of course we got to go to the
bottom leaves layer and jazz those up a bit too. All right
looking good looking good. Um okay so there's something kind of
weird happening here. There's like a leaf grown out of a
leaf like maybe I didn't plan very well with my like layers. So I'm gonna use
a layer mask to erase part of that leaf. This is a non-destructive way to erase.
If I mess it up I can always go back. I'm gonna select
the tree layer and since I have that selected it's only gonna erase
where the tree branch is and then I'll erase
the other little details too. I'll just erase those. Not a big deal.
Okay the next thing I'm gonna do is just add some little
like little leaf buds. I don't know what they're called but the the fiddle leaf
fig has these little kind of sticky things sticking out things. So we're
gonna go ahead and draw those on. I'll have to turn off alpha lock to do
that and oh okay we accidentally messed up. I
gotta delete that so I'll find where it is.
Just erase that. Cool cool looks good. The last thing I want to do
because the the pot is looking a little flat to me so I'm going to add
some shadows and I want to do it using the multiply blend mode so that
everything will go dark in the same way. So I'm going to select the pot shape
layer and use that to create a layer mask.
I'll turn on multiply blend mode on that layer
and then I'll go ahead and add some dark colors and kind of
make some shadows there. Cool I think this looks pretty great I'm pretty proud
of my fig tree. So I hope you learned a lot about masks
from this tutorial. I know a lot of people are a little
confused about them not quite sure how to use them so
hopefully this gives you some new tools to use helps your drawing workflow
out and just helps you be more creative. You can purchase the brushes used in
this tutorial at bardobrush.com. If you're posting your
work to Instagram I would love to see it. Use hashtag
bardobrush. Thanks and happy art making! Please subscribe for more awesome
tutorials and check out one of my other videos.
Have a great day!
