Wood Turning Oak & Resin || The ROCK Bowl 🤬

Motivation Monday
96 followers
16 Video Views·Nov 2, 2022
I'm not gonna lie to you, this could get a little western.
Alright, so I gotta get this done quick. It is a movie night. I was turning this and it was just
gonna be a natural root ball. This is oak. And as I was turning it, I just found the caverns going
deeper and deeper, getting more and more hollow. So I said this has got to be filled with epoxy.
So I stopped posting Instagram posts. I'm gonna end up casting this piece in resin. I think it'll
end up looking pretty cool that way, but I need your help. I need you to go leave a comment.
These are four choices. And so the color people picked was this copper red, which is actually the
color I wanted. Now to add to that, I'm gonna use a metallic bronze and liquid sun. This is a very
slow cure epoxy, so it's a good chance these will all just blend together, in which case I'll get
this orangish red color, which is what I'm going for anyway. So I figured it can't hurt to see how
this reacts. Two parts A, one part B. Since I know this is the best part. Don't you look at my feet.
The main color, the coppery red. The bronze color. This has been in the pot for three days.
I have to finish my Mother's Day gift before I actually turn this, but I'm dying to see it.
I like it. Got it chucked up on the wormwood screw, and I'm envisioning just a very simple
bowl, because I really think this epoxy and wood is going to speak for itself. She's a little out
of bounds right now. All right, that's at 750. That's about as fast as I'll go until I get it
trued up. Letting it feed itself and move forward as it can. Very slow, but it's cutting. Carbide is
working pretty good now though. I have the tool rest lower, and I'm angling it. Now that I say that, I'll
get a catch like on that last one. I've got the bottom. I got most of these little divots taken
out, which I'll continue to work on those, but I want to come up and true it up and start sloping
my angle here. Hopefully we'll start seeing some wood. That's what I'm real excited about. Right
now the carbide is working best. I'm just going to keep on going with whatever works. All right, here
comes the noise. You know what? I'm going to try that quarter-inch gouge that worked so well on the egg.
I tried sharpening my gouges again, and they were hauling off material a lot quicker than the
carbide, but now that I'm getting close to the shape I want, I've switched back to the carbide, and
it's just doing a much, much better job. When I get down to the wood here,
and here, I'm almost there. I'm going to clean this off of here, grab my diamond stone out of
my toolbox, and sharpen up the carbide a little bit, and continue on. I think I got ant sparks
coming off. It's like after midnight, and as much as I wanted to at least get this shaped, sanded,
and flipped around, I thought I was pretty close to it. This rock, I assume, that I epoxied in here
has just demoralized the hell out of me. I'm going to call it quits here. We're going to wrap it up
for tonight. Okay, so I didn't give up. I didn't go in for the night. I got a diamond bit on a
Dremel, and started digging out. I dug what I thought I needed to out, then I sacrificed my
Harbor Freight skew, went across it again, saw sparks still, dug out more skew, sparks in different
spots, found a very tiny little pebble rock thing here, but the last time I went across it, no
sparks. What kept me out here was, I knew I'd have to fill this in with something, so at least now I
can fill it in and then go to bed. So I'll probably just be using the black Starbond and some accelerator,
because that's some good ----, but I'm happy with it. This wood is hard, but it ain't throwing sparks
hard. As you can see, we've had a little jump in time. I got real busy with CNC projects to where
I could only work on this like 15-20 minutes at a time, and that kind of worked out because there's
lots of times where I missed spots that needed super glue. Sanded it to 320, and now I've got
sanding sealer on it, which is just thinned down shellac. But this Incredible Solutions Casting
Resin, I love it. They were kind enough to share a 10% off promo code with anybody watching this
video, any of the viewers that might want to give this a try. Because casting resin is not cheap,
it's not, so any little bit helps. So I'll flash that promo code up on screen, because of course
I'm ill-prepared, and I don't remember it offhand. That was a good one. Really sucks when they're not good.
Ooh, she's smoky!
I changed my mind. I'm gonna try to drill out the center. I just, I don't like this live center being
here. It might be safer, but, but I don't like it. I'm gonna try to get the full length of this,
probably about three and a half inches, and then I'll do the rest by hand.
All right, so we're about an inch in, and I did switch to the bowl gouge. It is doing better.
My daughters have enjoyed watching me.
Uh, the push cut's not doing too well, but the pull cut and like a scraping action is doing the best,
and I didn't think about that until just now, but this might be kind of like an end grain bowl, but
the grain's going so many different ways, who the hell knows? I guess that's what you do with the
root ball, but I'll let you watch a little bit. Probably screw up now. One thing I have learned
to do is when I'm cutting here, if I can't see it, I watch the outside line. A little tip for you
newbies, like me. I gotta resharpen again. Yeah, she's dull already. Not completely, but too dull
for what we're doing here. All right, so those of y'all with a keen eye will realize that we've
made some progress. We're about halfway deep. I did switch to carbide because the bowl was just
getting too narrow. I don't know how to work my bowl gouge into tight areas like this yet,
and I don't have a bottom bowl gouge, so carbide it is. Hopefully I'll be able to get some video,
and I'm not just blocking you the whole time. This is probably one of the deepest bowls I've done,
because I haven't been turning that long. I like how it's going so far, so I'm going to turn my
carbide and keep at it. Contact! Let's see where we're at. I'm telling you what, this incredible
solution is horrible plastic. This cuts like butter. I need a proper light. See, I need a
light right in there. A couple little holes, some of the cavities, but overall I'm pretty happy.
It's still on the chuck, don't worry, but I have some holes in here that I want to fill with CA.
I was thinking about going a little bit thinner, but I came across this end.
Wood doesn't make that sound. The rock that was on the other side was right around here,
maybe went down to there when I was digging it out. This is a new rock,
so Turnings by Turner mentioned that I should call this the rock bowl.
I think he may be right. Just a few holes and stuff like that I want to go ahead and fill in
before I start giving her my final scrape, so that's what I'm going to do now. All right guys,
so we got Starbond all over the inside. Man, I am having a hard time bringing myself to turn this
knowing there's a big-ass rock in there, but that's what carbide's for, right? No, no, that's
not that's not what it's for at all, but that's what we're about to make it for, right? But right
now we're at the depth. I'm gonna leave this nice thick rim, you know, it's it's a bold bowl.
I don't think it needs to be super thin, but anyways, enough of the jibber-jabber. We're
about lined up. I might get in your way, I don't know, and me seeing what I'm cutting is more
important than you seeing what I'm cutting. Let's get to it. It's about to get loud.
Fan, dust collector, contact. All right guys, if you can tell by the sander right here,
we uh, we've gotten to this point. I did clean up the rim a little bit. It's just a nice
rounded edge inside and out. Got the old long neck Robey, which is probably the first time
this tool has ever come in handy for being so goddamn big, and it's a pretty simple process.
I'm gonna sand it, and you're gonna watch, and I'll fast forward it through most of it.
All right guys, the bowl is finally complete, and I'm super excited to show this to you guys.
I didn't make it sit through all the sanding, the finishing. I just put a lacquer finish on it.
I love every single thing about this bowl. I love all the swirls, and I'm telling you,
what you see on camera is nothing compared to looking at this thing in real life.
I even like the rock in there, and yes, I left that rock in there.
I was deep enough that I didn't want to try to turn it out, and who knows where it stopped.
There's so much going on with this bowl, you'll never even notice it.
The Incredible Solutions Pourable Plastic Casting Resin. I can't speak
highly enough of this stuff. I will be buying some in the future. I hope to use
more of it. I hope to get to do more projects like this. You know, I can't do every single
project with resin and wood because, I mean, resin is expensive, let's get real, but that's also why
I'm happy to remind you guys that if you're interested in doing something like this,
you can find it on Amazon. I'll leave a link in the description, and don't forget to use
the promo code BRAD10 to get your 10% off. It's good for the next three months starting from
today. I'll flash up on the screen exactly when the promo code will die. That way,
if people are watching this after the fact, they don't waste their time trying to go get it.
You know, maybe I'll get to work with Incredible Solutions more in the future.
Maybe they'll keep reissuing promo codes. We'll see. You know, I have no problem
doing projects like this, showing y'all what can be done, and honing my skills even more.
Anyways, it's getting hot. I gotta get the air conditioner back on. Hope you enjoyed it,
show you some video of just the bowl, some of the features I really like in this thing
that I can only show you with close-up shots.
