Macramê de Dia dos Namorados - Painel de Coração | Tutorial Passo a Passo

This is Life
47 followers
27 Video Views·Nov 2, 2022
Hello, I'm Osana, art therapist, educator and macrame instructor.
And today I want to teach you how to make a heart panel.
Guys, I want to apologize for the noise, because my neighbor decided to do the work today.
But look, the tutorial is so beautiful, it's worth it.
So, let's watch the video?
To make this heart panel, we will work with the square knot.
With the loop knot, to attach the cord to the base, and with the square knot.
For this, I chose the 24-thread ribbon.
We will work with 16 cords of 2 meters of 24-thread ribbon.
I will use arara, I will use a wooden base,
it is a branch of wood that I have already prepared and waterproofed.
And it is 25 centimeters long.
I will use the hooks, I will use my scissors and I will use measuring tape.
Now that I have already explained everything you will need,
let's put our hands on the dough and make our panel.
We will start by taking the cords, joining the ends and making the loop knot at the base.
We will tie all the cords at the base with the loop knot.
After the cords are tied, we fix their position at the base.
First, I will take care of tying.
So, remembering that there are 16 cords of 2 meters.
And I'm using the 24-thread ribbon in this shade of pink.
Always joining the ends and looping at the base.
I attached the hooks with this tape so they don't get loose when I'm attaching the cord at the base.
This avoids the base from slipping and falling here.
I'm going to run until I attach all the cords.
Now that I've put all the cords here, I'm going to fix them at the base so they are close
and so I have a breath here on the sides of the base.
I'm going to tighten each loop knot well and I'm going to start doing the work.
I'm going to attach here so it doesn't slip and I'm going to start working with the square knot now.
I'm going to separate two, four lines and in this one I'm going to start working.
So, I separate here four lines and here I start working.
I'm going to make a space of 7 cm and here in the 7 cm I'm going to start doing the knots to form the heart.
So, first the square knot here in the 7 cm.
The square knot, remembering, we take, there are four lines, we take the right line,
go under the two in the middle, over the left line, bring the left line inside and pull.
Checking here if there are the 7 cm, so I can go up a little more, now yes, 7 cm.
And now I make the knot to the other side because the square knot is composed of the double movement.
It is also called the double knot, I do it on one side, I do it on the other.
I take four more here and I'm going to do the same thing.
Now I can measure one by the other, I give a stretch and it's at the same height
and I complete the knot here without letting it twist, ok?
So, the square knot on the other side, ok?
Let's do the same thing on this side.
So, I count two, four lines and separate and come here and start making the square knot measuring the 7 cm, ok?
7 cm here, when I pull the knot, I check the 7 cm.
So, let's go.
To make the square knot, I work four lines.
The right line goes under the two in the middle and goes over the left line forming a P.
I bring the left line inside the belly of the P and pull.
When I pull, now I'm going to check the 7 cm and 7.
Now I can close the knot without letting it twist.
I can go back with them here.
I'm going to take four more and make another knot at the same height
and then I can measure one by the other.
I closed it and that's it, right?
After that, now I come here, separate two lines and I'm going to work with these four here
because I'm going to start making the second layer here of the heart.
So, square knot.
I make the P to the other side.
Same movement, but I form a 4.
I bring the right line inside the belly of the 4 and that's it.
So, now I'm making this second layer, I'm making a square knot,
but alternating between the knots I made above.
So, let's go here.
That's it.
Now I take two lines from here, two from here and repeating the square knot.
I make the P, I press it and I make the 4.
Always tensing so that the line doesn't come back and now I'm going to do the same thing on this side.
I separate two, these two can come back.
I separate these two from here, I come with these two and these from here, ok?
And I'm going to make a square knot.
Tensing the line so it doesn't come back.
I close it, I take two from here, two from here and let's go.
So, I'm making a square knot, but I'm alternating.
So, I'm working with alternating square knot, ok?
I did the same thing, there's one missing here.
So, I take two from here, two from here and square knot.
I press it, I bring it to the other side and that's it.
Done.
I come back with the line here and now I start from here.
I keep alternating the layers, ok?
I'm making a square knot alternating.
I'm alternating until I finish the heart.
So, two from here, two from here.
Oops, did you see that I took the twisted line?
This happens, right? I took the twisted line.
So, you have to fix the line before you take it and do it.
Tensing the line so it doesn't come back and to the other side.
Done.
Now, two from here, two from here and I'll keep alternating.
Always alternating the square knot.
Doing it lightly, there's no need to tighten this knot too much
or to make it too loose.
Always fixing the lines.
Tensing the line when you start to do it
so it can be right.
Done.
Now, I'll keep going.
Two from here, two from here and I'll keep going.
Again, the square knot.
Tensing to the other side.
I pulled and done.
The half of the heart's arc is ready.
This half of the heart is ready.
Let's start here from the edge, from the left,
just like we started from the other times.
Then, we'll join the two bands, but for now, they're still separated.
I made this first arc, let's close this arc on this side,
on the left side.
So, fix the line and come.
I did it to one side, I did it to the other and done.
Two from here, two from here.
I did it to one side and to the other and done.
Now, I'll join these two that were missing, one side and the other.
I made the two bands of the heart's arc.
Now, we'll keep alternating.
So, I come here.
I don't work on these two.
I work with these four here.
I fix and go.
Square knot.
To one side and to the other.
Again, I fix and go.
Square knot.
To one side and to the other.
Again, two from here, two from here.
I fix the line.
It's always important to fix the line so that your work is neat.
The lines don't get tangled.
It's very neat, you see?
Now, it's time to join the two bands.
Finally.
Look.
I closed it here.
To the other side.
So, you can see that we're working
only with alternating square knot.
We alternate and make layers of alternating square knot.
I fix the line and go.
Again.
And again.
Remembering that the last two are there.
I come back with the lines.
Now, you can see the heart forming.
Let's go.
Again.
Four lines.
We're in the middle of the heart.
Then, we'll start making the movement to go down.
And make the heart's beak.
For now, we're just filling it.
I'll run a little bit until the end of this row.
Now that I've finished this row,
we'll start making the heart's beak.
So, still with alternating square knot layers,
so we can make this movement here.
So, we separate two from here,
two from here,
to start doing it.
To follow this work now,
and to make the heart's shape,
we'll separate the outer lines.
So, here I've separated two.
Now, I'll separate four from each side.
For the next layer, I'll separate two more.
For the next, two more.
Until we finish here.
And you'll see this.
So, you can see that it's already moving towards the end of the heart.
So, I'm always separating two, two, two, two.
Look, now I'll take it off.
I'll take it here, ok?
I separate here, and separate here.
Guys, I'm sorry, but my neighbor decided to do the work today.
So, there's this unbearable noise
from Makita
disturbing me here.
But, it's ok, right?
What matters is that we're making
a beautiful heart's macrame,
full of love.
So, let's forget about Makita's noise,
which is annoying,
and think about love.
That's it.
We're almost done.
Look how beautiful.
Look.
I take off two more.
You're always taking off two lines.
I do it here, look.
There are eight lines left.
So, look.
One heart here,
and another one.
And now,
the last one.
I can even go back with all of this here,
because, look,
I separated and left four lines here in the middle,
which is the last square that I'll make,
the last square knot here,
closing my heart.
Done.
Look how beautiful.
I'll adjust it a little bit here at the base.
I'll open my lines a little bit here,
so it doesn't get crooked.
And now I'll adjust it.
I'll make a little beak here, ok?
Notice that the lines are uneven.
Ah, but I made a mistake.
No.
Why?
Because we made a lot more square knots in the middle
than in the tips.
That's why there are more lines in the tip
than in the middle.
The more you use,
the more you make knots,
but the line keeps going up.
Now we'll do it here.
And I always like to start really low,
because if I make a mistake,
there's still time to fix it.
So we'll cut.
And this one is the middle line.
And now I'll cut to the other side.
I'll go up.
Now I can adjust it better.
After I've removed the excess,
now I can adjust it better.
I want to make my tip shorter.
And that's it.
And there it is.
Our work is finished.
And here it is,
meeting requests,
the heart panel,
which was the most requested panel
in recent times.
So here it is for you,
the heart panel.
I hope you liked it
and that you've learned how to do it.
And if you do,
take a picture,
post it on your Instagram,
tag me,
because I'll love to see it.
See you next time!
