DIY MACRAMÊ - PASSO A PASSO INICIANTE

Daily Dose of Positivity
67 followers
10 Video Views·Nov 2, 2022
Hello, I'm Osana, art therapist, educator and macrame instructor.
And today we're going to do something special together.
It's a hybrid between a wall panel and a plant support.
The techniques I'm going to teach you both serve to make a wall panel
and also serve to make a plant support.
And it's this support here that we're going to do.
It has a wooden base like we do when we make a panel.
To make a panel, I have to have a wooden base.
And then I'm braiding my panel.
So, this work starts as a panel and then I finish it as a plant support.
And it's this kind of work that we're going to do today.
To make a work of this size, which is 50 cm,
I always need to cut three times the length of the thread I use
and that will be left with the final work.
So, I need to take my thread and measure three times more.
So, I'm going to cut 1.5 meters of thread.
Because my final work, I want it to be 50 cm.
So, I cut three times more the thread.
I'm not going to cut just one thread.
I'm going to cut several threads to make my panel.
Every time I make a panel or a macrame work,
I need to remember that I have to have even number of threads.
I can't cut odd numbers.
I need an even number because I need one thread, another thread to make the knot.
So, I'm always going to need even number of threads to make my work.
This is an important thing for you to remember.
Even numbers.
Before you start making the knots,
count the threads to know if you have an even number of threads.
Because if not, in the end, there will be a problem.
There will be a thread missing for you to close your knot.
The materials that I'm going to use and that I'm going to need for this work are here.
I need the measuring tape to measure my thread.
But I can also measure the thread the way I've already taught you.
I stretch the thread from one shoulder to the end of my arm.
Then, I have one meter of thread.
Like this.
I take the thread and stretch it.
Here, I have one meter.
Here, I have one meter of thread.
If I need one and a half meter, I come to the other half.
Here, I have one and a half meter of thread.
I cut the thread.
I'm going to cut the other threads the same size.
I'm going to cut one by one.
I cut one and a half meter of thread.
I cut the other threads one by one.
So, these are the two ways that you have to measure your thread.
You can use the meter, if you find it more difficult to do it like this.
Or you already do this shoulder measurement and you have your meter, too.
If you have doubts about the size of your arm, this distance, if it really is one meter,
you can use the measuring tape and measure from your shoulder until you stretch the end of your arm
and see how much it measures.
Then, you'll see.
Does it measure one meter? Does it measure 98 centimeters like mine?
So, you can stretch it more and measure one meter.
The thread that I'm going to use is this one.
It's the Haak brand thread, number 63.
Three.
Why 63?
60 is the number of this type of thread, of this type of cadarço.
And the bar, three, because the smaller this number, the thinner the thread will be.
I have 62, 61, it gets thinner.
I have 65, 67, 62, and then the thread gets thicker.
Wow, this thread is an ideal thread for those who are starting to work with macrame.
Why?
Because it runs well between the fingers.
We pass it easily.
It has a very good texture and it almost doesn't deflate.
It will only deflate if I want to deflate.
So, I can move it, give a knot, get there, get here.
It's still very good and doesn't deflate.
So, I have ease to work with it.
And, especially, those who are starting, don't get nervous about the thread getting tangled,
about the thread deflating.
After you have more practice to work with macrame,
then you can work with any thread.
You won't have more difficulties.
But, in the beginning, we get tangled a little bit.
So, this thread is the ideal thread.
You can find this thread in any closet near your house.
Because it's an easy thread to find.
If you live in a big city, like Rio de Janeiro,
you can find it in Caçula, which is a huge store that sells all kinds of threads.
You will go crazy to see how many threads there are,
how many colors, how many textures.
Then, you will want to buy all the threads.
Today, I'm going to work with this thread.
I'm going to use the scissors that I need to work, to cut.
I'm going to use a wooden base that I picked in the wild.
The wooden base for you to make your macrame can be any.
You can work, but I don't have a piece of wood like this.
Okay, you can work in a cabide.
You can make your base anything you have at home.
Your eyes will open and you will start to see possibilities for you to make your macrame.
Today, we are going to work with this wooden base.
You can also buy in a hardware store some wooden bars that sell ready-made.
You have to cut to the size you want.
Today, I'm going to use this size here.
But I worked with branches, real tree branches that I pick in the wild.
When I'm going to walk, I find some branches like this and I bring them home.
And then, I prepare this branch.
I'm going to cut to the size I want.
I'm going to sand, I'm going to varnish.
And the branch will be ready for me to make the base of my macrame.
So, this is the base we're going to use today.
We're going to need the hooks.
These hooks are the supports that I have.
And I also use an arara.
An arara, which is a dress arara.
But if you don't have a dress arara, you can use any base.
To hang.
You can use it there in your service area.
In your dress string.
And you hang the hooks.
And you're going to put your base.
And you're going to braid your macrame there.
Now, let's cut the lines.
I cut the line.
Measuring.
That way I already taught you.
One meter.
As I'm going to need lines of one and a half meters, I'm going to cut.
I already cut here.
One and a half meters.
And then I'm going to cut the other lines by this measure that I already did.
I'm going to cut twelve lines of this.
To do this job.
I'm cutting one line by the other.
After I measure the first time.
I don't need to keep measuring one by one.
Okay?
I cut one by the other.
And I'm separating.
Here next to where I'm going to work.
I haven't cut them all yet.
I unroll and.
I'm going to cut.
Let me see how many lines I've already cut.
One, two, three, four, five, six.
Seven, eight, nine, ten, eleven.
Only one left.
And now.
All the lines here.
Let's tie.
Now I'm going to tie.
The lines at the base.
When I'm going to tie the line at the base.
I'm going to take my line and I'm going to.
Align the tips.
I join the tips.
And I stretch.
Look.
Why do I have to do this?
Because if not.
My work will be unequal.
The lines will be very unequal.
And it will be a problem when I start.
To give the knots.
So now I'm going to get this.
Piece here.
I've already joined the tips.
This piece.
I pass.
Through the wood.
And.
I get in here.
And I pulled.
And I made.
The initial knot.
That we also call the loop knot.
This is the initial knot.
I first join the lines.
I leave this space here.
In the middle of the line.
This space.
This loop.
I put it behind the wood.
I open.
I pull the rest of the line here.
I hold my base so it doesn't fall.
And I'm going to pull.
And then it's the first knot.
It's the loop knot.
It's the initial knot.
I do this with all the lines.
The same process.
I join the tips.
And I give the loop knot.
Again.
I join the tips.
And I give the loop knot.
Attention.
This knot.
It always has to be on the same side.
I have to pay attention.
I can't just tie the line.
Randomly.
Because if not, I'm going to stay.
With one knot back.
The other knot forward.
If you do the opposite.
Let's do it for you to see.
If you do the opposite knot.
What happens?
Your knot.
It stayed back.
And then your work.
It's not pretty anymore.
So what do you do?
You undo.
And you're going to tie it correctly.
I join the tips.
And I tie it.
Always.
To the same side.
See?
And then.
The loop knot is always on the same side.
After we finish putting.
All the lines.
We're going to give a final tighten.
On these knots.
Because sometimes they get a little loose.
Because we're going to put.
Go moving.
They get loose.
So after we tie all the lines.
Then we come giving a final tighten.
On these knots.
So they don't get.
So loose.
So they don't get loose.
But first we put.
All the lines tied here.
I'm almost done putting.
Remembering that.
When I pull.
To make the loop.
I can also.
If I pull badly.
I also change.
The size of the line at the end.
If I pull on one side only.
The line will be unequal at the end.
So you can't pull on one side only.
Every time you make the knot.
You have to pull.
Both lines at the same time.
That's why I hold both.
And pull both.
If I pull one at a time.
It will be crooked.
Done.
Now I fix.
The knots.
I tighten.
And fix the lines.
Because sometimes when I tie.
The line does this.
Notice?
It turns.
And if I make my knot.
With the line turned.
It won't be beautiful.
It will be something weird.
So when I make the knot.
I fix the line.
It has to be always.
Fixed.
All of it.
Very well.
With the lines tied.
I will start to work.
We will make now.
The fastening knot.
That is the hardest knot of macramé.
It takes a little longer.
It consumes a little more line.
And demands more attention.
So we have to have.
A certain balance.
In the lines.
And you have to have a domain.
About them.
So you can make your drawing.
With the fastening knot.
You can use it.
In a straight line.
You can use it diagonally.
You can make drawings with it.
As I will do in this work.
So pay attention.
As I want to make a work.
Starting from the middle.
I will count how many lines I have.
And I will.
Count.
Half of them to start the work.
So I have.
1, 2, 3, 4,
5, 6, 7, 8,
9, 10, 11, 12.
I have 12 lines.
Even number.
I will count 6.
And I will start to work.
1, 2, 3, 4,
5, 6.
6 lines.
1, 2, 3, 4,
5, 6.
1, 2, 3, 4, 5, 6.
I have 2 halfs.
Of 6 lines.
If you don't want.
To make a mess.
You can separate.
Your lines here.
To work separately.
What do we do?
To work with Festonet stitch.
I always work with a guide line.
This guide line.
Is that will.
Guide all the work.
All the drawing.
It will be made.
From this guide line.
And the knot.
Will be made on top of this line.
Always on top of this line.
This line.
It will be separated.
I always have to hold.
This line.
To not mix with the others.
The others will only make the knot.
On top of it.
The knot is like this.
This is the Festonet knot.
Passed over the guide line.
Brought here.
I made a knot.
But I take this knot.
To the tip.
I hold.
I do it again.
Twice.
This tip is there.
I'll take it again.
It was.
I entered here.
It was.
Again.
I made a knot.
Again.
It was.
In this I already worked with four lines.
Two here.
And two here.
I'll work with two more.
I made a knot.
I give the first loop.
I give the second.
And closed.
One more.
I gave the first loop.
I gave one more.
And closed.
Let's do this.
On the other side too.
In the same way.
This line is my guide.
And I'll work.
With the lines.
Giving a knot.
On top of this one.
What is the difference now?
In this one I went there.
In this one I came here.
I worked with how many lines here?
Two, four, six.
So, I'll work two, four, six.
And these three will be left.
For something else later.
So, let's go.
Let's start working.
I gave the knot.
I run with the knot until the end.
And I give again.
The other line now.
Which is from here.
I'm not working with the lines from here.
Only with the ones from here.
Let's go.
One loop.
Another.
Again.
And another.
Again.
And another.
And the last one.
The last knot.
Done.
I'll come back with everything here so you can see how it looks.
Look.
Can you see?
Now you'll separate here.
Four loops here.
From the middle.
To make a square knot.
A square knot.
That I'll make.
That four.
I pulled here.
Always adjusting the line.
So it won't be crooked.
And I'll bring until this line here.
To stay at the height here.
Can you see?
Where I made this roof.
I do it again.
To the other side.
To make the square knot.
And a square knot.
Now we'll finish.
This ribbon.
I went there.
Now I'll come back.
To make a square knot.
A knot.
I take the next line.
Be careful not to take the wrong line.
If I take the wrong line.
These lines will be left here in the middle.
So.
It's always the line that follows here.
In the sequence of your knot.
And go giving the little knots.
Look.
Because the lines move.
And then you have the tendency to do.
To take the wrong line.
So you have to be careful.
Not to take the wrong line.
Why did I stop here?
This is the exact half.
When I'm working.
With a rib stitch.
And I want to make this drawing.
I have to work with this balance.
Half and half.
So I worked.
The half of the drawing.
Now I'll work the other half of the drawing.
But I have to work.
From this side here.
Not with this guide anymore.
I go back to my guide on the right side.
And.
I come back with the lines.
These lines here I'm not using.
I came with them here.
Now I come back.
And I'm doing the little knots.
And then I'm doing the work.
That is balanced to one side.
And to the other.
The same thing I do.
I do this on one side.
I do on the other.
The same drawing.
Only with the little knots.
This is the last.
And I closed.
I closed my stitch.
I closed here the rib stitch.
The lines are still loose.
So I have to tie this rib stitch.
One guide with the other guide.
With the same little knot.
Look.
I made the little knot.
And the second.
And then I closed.
I closed the drawing.
And here I can separate the lines.
For my work to be.
Balanced and tidy.
You go looking and go.
Tidying up the way you.
Find more beautiful.
Here we will get four lines.
And we will make the square knot.
Again.
To finish.
One knot to one side.
One knot to the other.
So I made the square knot.
Ok?
Now.
Tidying up the lines.
I will do.
The part that I want to.
Attach my plant.
When I will attach the plant.
I come.
With.
Two on each side.
Why?
If I leave it like this.
I have just a panel.
I can work it until the end.
And make a panel.
But as I want to transform this panel.
In a plant support.
I have to make a base.
To put my plant.
This base.
It has to be tied up.
Here in the front.
So that the vase is hugged.
Hold.
So I come with.
Always working with the even number.
And I will make the square knot.
So I more or less.
Calculate the size of my vase.
I imagine the size of the vase.
That I want it to stay here.
So the vase will stay here.
I want this drawing to appear.
And my vase will stay.
From here down.
So I will bring these lines.
To tie up here in the front.
Look.
These lines will tie up here.
So that the vase is stuck here.
And I get a panel.
And a plant support.
So.
Let's do it.
Now this work.
We take.
Two lines on each side.
And we join here in the front.
And here we do.
The square knot.
Which is the simplest knot.
That you already know how to do.
I do the four.
And.
I give the knot.
What is the secret here?
Hold well.
The secret for you to work.
And make your plant support.
Inside a panel.
Is to have this security.
Inside your fingers.
Inside your hand.
You will hold the line.
Inside your hand.
So that it is straight.
Look.
You tension the line.
Without letting it wrap.
The line is tensioned here.
Tensioned here.
And then you do.
Your square knot.
Without letting it get crooked.
Look.
I tied well.
I have the first square knot.
But only this square knot.
Only this knot.
I do not hold my pot here.
It is little resistance to the pot.
What do I do?
I take two more.
I'll get two on this side.
And I'll join with two here.
Wow! How complicated.
It's a little complicated.
But.
With ease you do this.
Because you are alternating.
You are taking two lines back there.
Joining with these two here.
And you will do the same.
Square knot.
So come on.
I did the four.
Always tensioning the line.
And.
I pulled.
I did the four.
And.
I pressed.
So I already did here.
Another leg to hold my pot.
Let's go with two more.
Two on this side.
And two here.
And let's go.
I did the four.
I brought.
Tension the line.
Did you see what happened?
When I pulled the line.
You can not let the line wrap.
Otherwise your work will be ugly.
Tension the line.
So that it is at the same height as the other.
And.
Do the four.
Pull the knot.
Done.
The two knots are at the same height.
They are centralized.
To hold better.
I will now take two lines of this.
Two lines of this.
And I will.
Make the square knot again.
I already made a new drawing.
Here in front.
Which is the drawing that will embrace my pot.
Here you can make another square knot.
And here too.
With these four lines.
Another square knot.
Why am I doing this little wall here in front?
To hold the vase.
This medallion.
That I'm forming here in front.
It will hold the vase.
Look.
Did you see?
This medallion.
It's where the vase will be.
Embraced.
It will embrace my vase.
And these lines will hold it.
Now I need to
make
the tie.
The support here in the bottom.
So that my vase
doesn't fall.
So, we will do.
We now adjust all the lines.
Well stretched.
The back ones.
And the front ones.
And
we cut
50 cm
of line.
Ok?
If I have 1 meter, 50.
So, we cut
50 cm of line.
For us to make
the finishing.
The finishing knot.
That is also called
hidden knot.
It's that knot that we finish the work
and hide it.
So, let's go.
I took all the lines.
All of them.
With care and
tensioning straight.
So that they don't get tangled.
I hold it.
And I will
make the tie.
And now
I will tie.
Ok? I brought it here
and I go. One.
Very tight. Two.
Three.
Four.
And in the fifth time
I pass
here inside.
When I pass, I hold here
and this line up here that I will pull.
When I pull, I hide
my knot.
I pulled
and brought it inside.
I pull very tight.
And it stays hidden.
This excess
I will cut.
Both on top
and on the bottom.
Here on the bottom too.
Now I will tie.
And
let's try to see if it worked.
Ta-da!
Look how beautiful
it is!
And this is our
panel bar
plant support
that we made today.
I hope you liked it.
That you learned
and that you do.
And you will do
take a picture
and send it to me.
I want to see how your work turned out.
And next time
I will teach you other more beautiful things.
See you then!
