How to Make a DIY Tomato Cage: Easy, Sturdy, and Cheap!

At the Table
85 followers
11 Video Views·Nov 2, 2022
Deanna here with Homestead and Chill, and today I want to show you how to make a really simple,
inexpensive, and durable DIY tomato cage using panels of remesh like this. We've been using
these tomato cages for years, and not only are they really easy to make, but they're far larger,
more sturdy, and more affordable than any pre-made tomato cage you're going to be able to buy.
And in addition to tomatoes, we use these for other bushy plants like tomatillos. So you might
be able to already tell where I'm going with this video here, but I'm going to give you a quick
rundown of the supplies you'll need, a demonstration of how to put one of these together, some tips
for actually installing and using it in your garden, and a couple of modifications you can
make to the design. So the first and most important thing you'll need is some panels of remesh. One
panel per cage will do unless you plan on doing a double-decker tall cage, which I'll talk more
about later. But these are about seven feet long by three and a half feet tall, and they're actually
used in construction in concrete support. So you'll find them in the concrete or like rebar area
of your Home Depot, Lowe's, or maybe your local hardware supply. They're a little bit different
from panels of hog wire in the fact that they're more flexible, they're easier to cut with bolt
cutters if you need to cut them, and they also do develop a bit of like a rustic faded patina, a
little bit rusty looking. These ones actually come silver, so you'll see them that way in the
store. We've just had this one in storage for a few years, so it's already changed. They also do tend
to have a few sharp points, so just keep that in mind. Wear gloves when you're working with them,
and keep that in mind if you have kiddos in the garden as well. These only used to be about seven
or eight bucks a few years ago, but with the supply chain issues the last couple of years,
I think they've about doubled in price, but that's still a lot more affordable than big
tomato cages that you'll buy pre-made. And then the only other two items that you need are two
stakes per cage, plus one for your tomato if you do want to stake your tomato plant itself in the
middle of the cage, and something to secure the cage together. We're using this soft garden or
like a coated garden wire that's reusable. You can use zip ties, you can use uncoated wire,
whatever you'd like to use. Just keep in mind what you plan to do with your cages during the
off season. If you want to actually open them back up to lay flat and store alongside a fence
or in a shed or something like that for easier storage, use something that you can easily do
and undo each season versus a more permanent installation if you plan on storing them just as is.
So I've got my gloves on, and Aaron's going to help me roll this and secure it into a cylinder.
You don't need a partner though, but it can be handy. All right, so here's a closer look at them
all assembled. This was the one that was already done, and the one we just did is here.
You can see the little soft wire ties that we secured it with every so often, but as you can see
we actually overlapped two sections or two squares. This size is really good for inside a
wine barrel, which is where we're actually going to be putting this, but you can also only overlap
them by one square to make an even wider tomato cage or overlap it more to make it even a little
bit tighter if you were doing a smaller plant. And then let's go ahead and get these put in, and you
can see how we would actually use them for the plants. All right, so this little sun gold cherry
tomato is the one we're going to put the cage on here, and this is an interesting one because it
actually already had like a little bit of stake feet on the bottom of the cage, where some of
them will just be smooth on this side. Kind of just depends on the pieces of remesh that you buy,
but this is actually handy because it's almost like little mini stakes already on the bottom
here. So I'm just putting that around, kind of giving it a little push, and then the last thing
we need to do is just secure this in place. As tomatoes grow, you probably know they get quite
heavy and have the tendency to want to topple over, and so we're just going to take a couple
stakes, and you can either do it on the outside or the inside of your cage. I'm going to do it on the
inside of this one just for fun, and I just like to line it up in line with one of the vertical bits
of the remesh, and I think I'm hitting the bottom of the barrel there, so that's as far
as that one's going to go. But getting that in, repeat on this other side,
right? Then we're going to use the same little soft ties or whatever kind of ties you want to use
to secure the cage to the stake in a couple spots. Voila! You've just made yourself a really easy,
sturdy tomato cage, and this is definitely not going anywhere. The other alternative that you
can do, in addition to changing the actual diameter of your cylinder by how much you
overlap it, is stack another one on top. So hold on. All right, as I mentioned, this is a sun gold
cherry tomato, which get really, really big and crazy and tall. So later in the season, I would
just leave this for now as is. No one wants to look at this craziness right now. You could actually
come through and double stack one of these guys, which is pretty intense, especially when it's in
this barrel. But the other thing you can do is do some variations where if you actually wanted to
cut this, you can use bolt cutters and cut this to be a little bit smaller, like maybe split one
panel in half, and then you could have two one-and-a-half tall cages out of that piece.
So you can stack some on top and then secure that. You would want to use longer stakes though,
so that these stakes would go up and secure the top one. The other thing we've done before is,
when we actually put this over the top, is try to overlap it and nestle it over this guy a little
bit so that it's hugging it and there's some overlap by a few of these squares down here for
added stability. And then it's not quite so tall as well if you didn't want to cut the other one.
And to do that, it's actually easier sometimes to wrap the other piece around this and then
secure it in place, because obviously if they're the same size already, you're not going to be able
to achieve that overlap. And so here's a little closer look again, just again tying the stakes
to the cage in a few spots. And then the next tip is how to deal with this as the plant grows.
As the plant grows and these branches get longer, you're going to want to try to direct them upward
to stay into the cage going up and up and up, rather than letting all of the branches hang out.
Otherwise it kind of defeats the purpose. It will still support those branches if some do
hang out the side, but we usually try to check our plants, you know, once a week
and just keep directing all of their growth up and inside the cage. Be gentle with the branches,
not to break them if possible. All right friends, it's as simple as that. Tomato cages are
such an easy, effective, and fuss-free way to support your tomato plants. You don't have to
worry about pruning or trellising or anything like that. However, if you're interested in learning
about other styles to support tomatoes, such as the Florida weed or string method, I will add a link
in the caption or description below here of an article that I have that goes over a bunch of
different ways that you can train and support your tomato plants. But otherwise, I hope that you
really enjoyed this video and learned something new. And if you did, please give it a like and
follow along and subscribe. And always check us out on our website homesteadandchill.com for even
more gardening tips. But now I'm going to get back to the garden. See you guys later!
