Macrame Lanyard TUTORIAL | Badge Holder | STEP BY STEP | Beginner Friendly | WeaveyStudio

Glass Beads
57 followers
63 Video Views·Oct 30, 2022
Here are something that we need to prepared. I'm going to cut three pieces
of cotton cords in length 1100 centimeters. Here's our three rows of
cotton cords with the same length. I'm going to put these on a D-ring. Make sure
the two bottom pieces match up and fold it in half. Make a hat knot on a D-ring.
Put this through here and then put the other two pieces on. I'm using this clipboard to hold down
this keychain. If you don't have a clipboard, you can just use a tape. We're going to make
these cords as six balls. Prepare a rubber band. So now you have six cotton balls. You can start
to weave. If you think it's too short to weave, you can untie it and tie it again.
Take cord 2 and cord 3. Cord 3 is on the top. Make cord 2 come through cord 3.
Just move your right hand when you make a knot. Two knots each cord. Take cord 1 and cord 2.
Cord 2 is on the top. Make cord 1 come through cord 2. Just move your right hand when you make a knot.
Two knots each cord. Let's do the other side. Take cord 4 and cord 5. Cord 4 is on the top.
Make cord 5 come through cord 4. Move your left hand only. Two knots each cord.
Take cord 5 and cord 6. Cord 5 is on the top. Make cord 6 come through cord 5.
Move your left hand only. Two knots each cord. Now I'm going to do a square knot.
I'm going to fold cord 2 as a 4 shape. Cord 5 is on the top. You don't have to do anything on
cord 3 and cord 4. So always hold them straight. Cord 5 has to go under cord 3 and cord 4.
This time we will do in an opposite way. Cord 5 has to do a 4 shape. Cord 2 is on the top.
Cord 2 go under cord 3 and cord 4. Take cord 5 and cord 6. Cord 6 is on the top. Make cord 5
come through cord 6. Just move your right hand when you make a knot. Two knots each cord.
Take cord 4 and cord 5. Cord 5 is on the top. Make cord 4 come through cord 5. Two knots each cord.
Let's do the other side. Take cord 1 and cord 2. Cord 1 is on the top. Move your left hand only.
Two knots each cord. Take cord 2 and cord 3. Cord 2 is on the top. Make cord 3 come through cord 2.
Move your left hand only. Two knots each cord. Take cord 3 and cord 4. Cord 3 is on the top.
Make cord 4 come through cord 3. Move your left hand only. Take cord 4 and cord 5. Cord 4 is on
the top. Make cord 5 come through cord 4. Move your left hand only. Two knots each cord. Take
cord 5 and cord 6. Cord 5 is on the top. Make cord 6 come through cord 5. Move your left hand only.
Leave some spaces here. Two knots each cord. Make sure you form a straight line.
Let's do the other side. Take cord 2 and cord 3. Cord 3 is on the top. Make cord 2 come through
cord 3. Just move your right hand when you make a knot. Two knots each cord. Take cord 1 and cord 2.
Cord 2 is on the top. Make cord 1 come through cord 2. Just move your right hand when you make a knot.
Two knots each cord. Leave some spaces here. Now I'm going to do a square knot. I'm going to fold
cord 2 as a 4 shape. Cord 5 is on the top. Cord 5 has to go under cord 3 and cord 4.
This time we will do in an opposite way. Cord 5 has to do a 4 shape. Cord 2 is on the top.
Cord 2 go under cord 3 and cord 4. Take cord 5 and cord 6. Cord 6 is on the top. Make cord 5
come through cord 6. Just move your right hand when you make a knot. Two knots each cord. Take
cord 4 and cord 5. Cord 5 is on the top. Make cord 4 come through cord 5. Just move your right hand
when you make a knot. Two knots each cord. Take cord 1 and cord 2. Cord 1 is on the top.
Make cord 2 come through cord 1. Move your left hand only. Two knots each cord. Take cord 2 and
cord 3. Cord 2 is on the top. Make cord 2 come through cord 3. Take cord 3 and cord 4. Cord 3
is on the top. Make cord 4 come through cord 3. Move your left hand only. Two knots each cord.
You can now repeat those steps for multiple times. Here are 35 pieces of diamond patterns.
You can make other macrame items by using the rest of the cords. Click here to watch other
tutorials. Prepare some glue and a sealing clip. Here's the front side and here's the back side.
We'll put some glue here and stick them together. And use the sealing clip to clamp it firmly.
After a few minutes, you can take the clip off. I'm going to use the remaining cord to wrap the
