How to Ride Switch on a Snowboard WITHOUT Going Back to Basics

Malcolm Moore
1 follower
12 Video Views·Oct 29, 2022
Riding switch. Sure, you can go right back to the basics, get on that bunny slope,
and become a beginner again. Is that how you want to spend your time on the mountain?
Probably not. You can already snowboard, which means you have the basic fundamentals
of good posture and edge control. In this video,
I'm going to show you how to take that skill set and apply it to riding switch.
Let's start right here. You've been coming down the mountain. This is a slope that you're totally
comfortable with. Rather than just bombing it down, you're going to pull over and stop on the
side. If you're regular, stop on the left of the piste. If you're goofy, stop on the right-hand
side. What we're going to do, real simple, we're just going to start in a heel-side traverse
across the mountain, but riding switch. As I say, you already ride, your posture,
your edge control, it's all good. You'll be able to do this easy. The only thing that's different
is that your head is going to be turning and looking the other way.
First, let me show you the whole sequence. Starting from that heel-side traverse,
we're going to revert the board around frontside 180, ending up on your toe edge.
Next, we want to complete a regular turn from toes around to heels. We're now going across the
slope in the other direction, and we're simply going to mimic those movements.
Revert the board around frontside 180, back on the toe edge, and now we're going to complete a
switch turn from toes to heels. Voila, we're back at the beginning of the sequence, ready to repeat.
I don't want to give you too much technical input because this exercise has been designed
to let you think about the movements you make in your regular toe-to-heel turn,
and then simply mirror them on the other side of the piste in your switch stance.
If you can figure this out on your own, then it's going to be a much more lasting
and effective way of learning the movements. However, if you are struggling, let me give you
a few pointers, starting with this, the revert right here, because that might be something
completely new to you. From a crouch-down position with your shoulders in line with the board,
begin to extend your legs as you pull your front shoulder up the slope. Push your back leg around,
keeping your toes lifted. As the board comes around 180, sink back down. There we go,
shoulders in line with the board. This time, you're on the balls of your feet in your toe-edge
stance. Again there. Notice as well how I always keep my head looking forward.
For the switch turn, biomechanically, there's absolutely nothing different from your regular
turn. It's just your opposite leg is at the front of the board. Common beginner mistakes
are that people often struggle to shift enough weight over their front foot. You need to do this
in order to have your front knee work as an effective lever in pulling the board around.
If you need it, this video up here works as an invaluable refresher on that particular movement.
That is literally half of switch riding right there. We've already done the toe-to-heel turn,
now we just need to get the heel-to-toe turn. This one, it is a little bit more tricky,
but so as not to overload your brain, we're going to keep things real simple and do pretty much the
same exercise. This time, we're going to be starting on the opposite side of the piece,
going across the slope on your toe-edge. Let's start the sequence. Here I am riding switch on
my toe-edge. I'm going to start off with a little backside 180 revert by looking back at the camera
and just rotating the shoulders up the hill. I rock back onto the heel-edge at the last minute,
then perform my regular heel-to-toe side turn. Same again, going in the other direction,
left arm leads up the slope, push the right leg back around to create the revert.
I'm now in my switch stance, ready for the switch heel-to-toe side turn. There we go,
that is one round of the sequence done. Now, we're just going to repeat and practice those
movements. The key with this exercise is right here, when you're in your regular turn,
to really think about everything that's going on. What are you doing? What are your knees,
your feet, your shoulders, your head, what is it all doing? Then once you've reverted back round,
we can remember that feeling and take it into your switch turn. As with the previous exercise,
biomechanically, again, there's nothing different going on. It's the same movements,
it's just going to feel a bit alien with your other foot at the front. Regular turn,
again, for the revert, just look back towards where you've come from, push the back leg around,
and at the last second, you just roll your feet back from toes onto heels. For the heel-to-toe
side turn, make sure you've got enough weight over the front foot that you can actively use
your front knee as a lever to pull the board around and just have your back leg follow.
Now, just repeat this exercise as much as you can to get those movements dialed in.
Awesome. We've now done both of the switch turns. It's time to simply eliminate that revert in the
middle and link the two together. Then you're going to be riding switch. Just start off on
something you're comfortable with, keep practicing. As you get better, then you can start to increase
the difficulty, moving up from greens, to blues, to reds, and so on. When you're riding, there are
all sorts of movements that you can make to help turn the board. From standing up tall at the edge
change for an up-unweighted turn, to doing the opposite in a down-unweighted turn, or perhaps
you want to anticipate the turn with some extra shoulder movement going in. We're riding switch,
so let's keep things simple and stick to the fundamentals. Good posture is essential. Keep
your shoulders dead in line with the board, head looking where you're going. When you're on your
toe edge, you want to have your hips pushed slightly forward, and as you come round onto
your heel edge, just pull them back slightly. This is going to help keep your spine aligned
vertically over the edge and send your weight down over the edge and help create grip. Now,
it really is that simple. Stick to the basics first, and then as you get better, you can start
adding in all those extra fancy bits. You're now riding switch, and the best way to keep
building on that is to bring it into your everyday riding. Think back to the first exercise. Remember
those 180 reverts that we were doing? When you're riding down the slope now, you can always chuck
one of those in, make a few switch turns, and then revert it back round again. Don't forget as well,
we've done all four of these 180 reverts. Two 180s makes a 360. I want to add a little bit of
style in there as well. Throw some 360s in, and you're going to be cruising down the piste,
switch, regular, and throwing in some spins. Get out there, give it a go. There you have it.
Switch riding made easy. By building it up one turn at a time, you're not going to overload
your brain. Like I said at the beginning, you're already going to have most of the skills and the
know-how. Now, it's just a case of putting it into practice. Thanks for watching, guys.
As always, please hit that like and that subscribe button,
and I'll see you next time for another video.
