DIY easy stickers WITHOUT sticker paper ✨💫 super aesthetic

Hi guys, welcome back to Pink Penguiny. In this video, I'll be showing you two different ways to make waterproof stickers without sticker paper. Method number one. This method you can use any kind of picture. You can print your picture out or you can draw something. So here are my pictures I chose. I printed them in color from a laser printer. So to begin, cut out your picture to any shape you want. You can cut it into a square, circle, or have a border around it. Basically any shape. Here I have wax paper, but you can use parchment paper for this too. You'll also need some tape. I'm using packaging tape, but I think any kind works. So lay out your wax paper large enough so that all the stickers you have can fit on it. Then take a piece of tape and stick it onto the wax paper. Then take a glue stick and print glue on the back of your stickers and stick them onto the tape. After that, take another piece of tape and stick it on the top of your stickers. Once the glue is done drying, take some scissors and cut out the shapes again with the wax paper. Be sure to leave a little room around the edges so that your stickers don't fall apart. Once that's done, take the stickers and peel off the back, which is the wax paper. This part is a little tricky and might take some time, but once you peel the wax paper off each image, the sticker is done. It should be about as sticky as the tape. Now that it's finished, you can use it to decorate something. I'm sticking them in my sticker book so I can use them later. Method number two. Okay, so this method, you can only use an image from a laser printer. The first step is to fully cover each image in tape. Then cut them out to the shape that you want. I cut most of them around the border to make a bubble kind of shape. Once that's done, take a bowl and put some water in it. Then take your stickers and put them in the water. Make sure they're fully submerged in the water so all the ink can transfer to the tape. You can leave these to soak in the water for about five minutes. Once the five minutes is up, take out the stickers and peel the back off. The paper on the back should be wet and easy to remove. I think it's easier to remove the paper in the water, but you can experiment with it. Once all the paper is gone from the back, take a piece of wax paper or parchment paper and stick the stickers on them to dry. You can also use a napkin and dry down the stickers. After they're dry, your stickers are finished. I really liked both methods. I think the first one has a better adhesive, but the second one is a little easier because the first one, peeling the wax paper is a little tricky. Which one do you guys think is easier? Comment below and let me know. If you guys decide to try this out, be sure to share with me on Instagram and tag me at PinkPenguinie. If you like this video, please give it a big thumbs up. Thanks for watching PinkPenguinie, and I'll see you next time. Bye!