THIS IS A GAME CHANGER | Long Knotless Braids With Skunk Stripe + Parting Tricks

Nature Makeup
94 followers
1 Video View·Oct 28, 2022
Hello beautiful people, welcome back, welcome to It Is Yo Ambitious Boo.
And today we are going to be trying to do some knotless braids on this thick old head.
This little head of mine is gonna make me cry.
But no seriously you guys, I have not done medium, medium, small, anything sized braids in my hair
in a hot little minute.
And I was going on vacation and I really wanted something that would last for actually two
different trips back to back, hence the sizing.
And so I'm starting off on hair that I actually blow dried.
I actually used the Rev Air blow dryer for this.
And this is the first time I'm seeing my color.
If you are new, you may not know, but I just recently dyed my hair and this is the first
time I'm actually getting to see the color like really stretched out.
And you can really see some of the patchiness and the unevenness with the color.
But it's growing on me.
I think it's cute.
It's a little moment.
Alright.
I'm gonna go ahead and start off by sectioning my hair first.
Get the leg work out the way.
So I always start by creating a front section.
And Jesus Lord, you can really see them hot roots.
My God.
I'm creating three major sections, front, middle, and back.
And I wanted to go ahead and actually shout out a fellow YouTuber on here, Miss Nola Viva.
I hope I'm pronouncing that correctly because she really put me on to this game changer.
Normally I'm a twist girl and I don't really focus too much on having perfect parting or
I'll do, you know, like the whole avant-garde parting.
So I don't even have to worry about that.
But this time, since I was doing braids, I really wanted to make sure them things came
out looking good all around.
So I got this three in one mirror that literally attaches to the back of your door.
And then you can adjust your height.
And I'm a little shorty.
Okay.
So you can literally slide it down and I can actually see.
And in this case, I was standing in front of the bathroom mirror.
And so the way I adjust it is that I was also using the bathroom mirror as the fourth mirror
to just confirm all my parting in the front.
And I was, I'm not going to lie.
Even though I went in with my fingers, that first part was not so bad.
So I just used these mirrors to go ahead and actually clean up the back section and actually
be able to get pretty decent clean partings.
Now I wasn't going for perfection.
I just wanted it to at least look like I tried.
Like look like, Oh, like you, did you do your hair?
Like, and I, and I did get that question.
I definitely did get that.
Oh, like you, did you braid your hair?
Like, I feel like people ask me that for fun.
And then they were shocked when it's like, wait, no, you actually braided your hair.
And I was like, yes.
I put in the labor.
Yes.
I put, I put in the work.
So in the back, I ended up with a total of two rows on top of each other.
The nape of my neck makes it look like the rows should be thicker, but it doesn't.
And so for the middle, my trick that I like to do with braids, especially because I feel like braids expose your scalp the most.
I don't like the little like flat look and the scalpy look.
So I create a diagonal in the middle shape, especially since my hair is thickiana.
And then I create the rows going diagonally instead of across.
And this just allows the braids to actually fall onto each other in more of like a brick pattern without having to create the brick pattern.
And this way, I can also kind of get away with making the sections bigger in the very middle.
No one's going to be able to see it just because of the way the braids are going to fall.
So if I like want to save time or get lazy, I can make those parts bigger.
Y'all, at this point, I was thinking, what the hell is going on in your mind?
When you thought about doing these braids, girl, why?
I genuinely just forgot about, you know, how the work it takes to really do smaller size things.
That's why I usually do twist and I do larger braids and things of that nature.
But, you know, your girl is still going to push through because we knew the end result was going to be worth it.
OK, so for the front, I went ahead and made my sections.
But I made my sections using my accidental skunk stripe as my guideline.
And that was kind of the focus.
And then I went ahead and continued to make the sections.
And I made them ever so slightly slanted just so that, again, the hair would kind of lay.
And it wouldn't just all lay super, super flat.
And it would give the illusion that the braids are fuller.
Because, truth be told, I actually don't really like the look of just flat hair on me in general.
And at this point, I finally finished partying all of my hair.
And I had not put one lick of hair in it.
And your girl was already tired.
Your truth is I'm tired.
Now, moving on to the hair, your girl picked up this 48-inch braiding hair a while back ago in this, like, Ombre 30.
And, you know, 2 plus 2 is 4.
But I forgot my ass was short.
And I did not put 2 and 2 together.
That 48 inches was like 4 feet.
And I'm literally 5'3".
But you know what? I digress.
I figured, if anything, the length would allow me to not really have to do any stretching.
But this hair was long.
Neal, long. Okay?
What I like to do when it comes to my knotless braids is I like to section them based off thickness first.
And then I will go ahead and customize how I need to feed in the braiding hair.
I went ahead and did the back just to test and see how long this was giving.
And this is the length for reference.
And for me, personally, it was giving real long.
Like, super long.
The braids did end up being a perfect match for my discombobulated hair color, though.
So that was a good thing.
But for my hair tools and products, I used all three of the – well, I used the two different types of Shine and Jam.
And I used some of this leftover hair jam from Kiesha, Kiesha Collections.
I found that that one was, like, harder.
And since I'm doing knotless, especially in the front, I wanted something that was going to be harder to hold the base of the hair.
And then I'll go in and I'll separate my hair into three.
And then to actually feed it in, I'll start the braid.
I won't finish it.
And I'll add my first small piece.
And then I will finish that braid.
And then before finishing it again, I'll go in and add my second piece.
So my rule of thumb when it comes to knotless is I like to have it thick at the base root.
I do not like my braids to get thicker as it progresses.
So I try to get the thickness of the braid from the jump so I don't have to add any more hair.
So I usually like to do either two.
If my hair is on the thicker side, I really only just need about two of the inputs in my hair.
And since this hair was pretty long, I didn't have to go in and add more hair after the fact.
Now for my little skunk stripe, I decided to go in with just the Pure Color 30.
Now in the store, this looked like it actually could have matched my hair more.
I guess in my hair in the sunlight.
But it's a little bit lighter.
And I didn't mind it because I feel like it will actually give real skunk stripe vibes, like a clear distinction in color.
I do believe this was in the length 30.
So I did have to kind of stretch it to match the 48 inches in length.
And I did want to go ahead and show you guys the difference between actually creating pieces that fit the braid
so that you don't have this weird little bubble or gap.
Or people are able to see where you added the hair.
And this is something that when I say I customize it based off the thickness of the section, this is what I mean.
So I went in with my two pieces, but it was too big.
And so you can clearly see where the hair is hanging from my natural hair versus it looking like it's coming out of my scalp.
So in this case, I need to go in and customize.
So I just make the sections thinner from the jump.
That just means I needed less hair instead of the same amount of hair thickness from the root.
And then I still will go in and I'll add that hair layer to just keep that consistent.
But that's how I customize the knotless braids to still give the illusion of thickness but also to not make it seem as if you can see where the hair is being input.
Especially in this instance since I was going for skunk stripe and the color is not exactly my exact shade.
I really did not want it to be extremely noticeable where I added the hair.
I wanted to make it look like I naturally have those highlights in my hair.
So that is how I just customize the braids to my liking.
And it's still a learning experience for me sometimes just because your hair thickness changes based off of the different sides of your hair.
One thing that I definitely learned throughout this process is shorter hair honestly is a lot better.
You can always add more hair but it's really hard to go in and customize a hair length that's already longer.
Because I feel like the length of the 48 inch hair while it did save me a little bit of time.
In some regards it got really tangled easily and that would take a lot of time but also it makes the hair weighty.
So you know normally when you braid you want it to kind of thin out at the ends.
That's going to give you extra weight if you're using like longer hair versus if you're using shorter hair.
And you can really thin it out towards the end.
So I actually would have tried to just use like a 30 inch or 24 inch and stuff like that and still keep the same length.
So keep it going down you know all the way to my butt and stuff but have the ends be a lot thinner.
And so I just continue to go in and add the hair.
I did customize it in the front because I really did not want extra tension on the hair.
So what I ended up doing instead is I actually ended up cutting the 48 inches in half.
And this way I also could address my little color situation.
Because if you notice like on the very top of my hair especially there's a lot more of the color.
And so I wanted the ends of the hair to show more especially in the front.
So I cut it in half and then I just stretched it out.
And then I added those pieces into the hair.
And I felt like that made like the look of the hair a little bit more cohesive and a little bit more customizable.
But it also just made the front of my hair just a lot less heavy.
Because I definitely could feel the weight of the braids as I started to like complete my hair.
And so to avoid any tension in the front so I don't lose no edges or nothing.
I just went ahead and made those sections a little bit thinner.
And this just saved me a whole heap of time in the end.
Speaking of time.
By the time I got to the last two sections in the front of my hair for my skunk stripe.
It was 5 o'clock in the morning.
The conversation didn't exist because your girl was tired.
To close out the front of my hair I ended up using three rows to do my little skunk stripe situation.
And guys I am so happy I did the back and the front.
Because it was 5 o'clock in the morning I had literally an appointment at 7 a.m.
So I ended up just finishing the front of my hair and then throwing a hat over my head.
And this was definitely if you couldn't tell a two-step process.
I believe I started like around 8ish or so the day before.
And so we're moving on to day two.
So this is how much I had left in the middle you guys.
My good God.
My good graces.
I really forgot how thick Yana my hair was.
But in the middle especially since I could already feel the weight of the braids in the front and just in the back.
I decided to use a lot less hair in the middle.
And made sure that the ends thinned out more so that this would not be super heavy on my hair.
And as you can see once it got to the middle of my head I definitely used creative direction when it came to the parting and the sizing.
Because I was really trying to get my hair done.
I literally was definitely catching a flight after this.
And so I was just trying to close everything off.
But once I went ahead and finished up the middle of my hair I decided to thin out the ends.
Because like I said the length definitely felt weighty.
And at this point your girl had only been.
I was running on 30 minutes of sleep.
So yeah your girl was tired.
But I went ahead and made sure I thinned out the back and the other braids that ended up being a lot thicker.
So that I could alleviate some tension.
I also did use a razor at some point when I wanted to like do it in bulk.
But I found that the scissors was actually a lot more effective.
So what I did was I let it kind of unravel.
I didn't braid it all the way down.
And then I just kind of thinned it out from like midway through the braid.
So that way it could be like really natural towards the ends.
Then to give my scalp some therapy.
I went in with the So So Fresh.
And I stole like the little dropper nozzle from one of my other bottles.
And I used that on my scalp to go ahead and give her some TLC.
Because she been through it.
Good God. Good gracious.
And then to seal up the braids.
Lock in some moisture.
And kind of set the hair so that the style lasts.
I went in with the mousse from Shine and Jam.
And then I let it set with my satin scarf.
For I want to say probably I think about an hour or maybe 30 minutes.
Because yeah I literally had to catch the flight.
And once I was done this is what my hair ended up looking like.
So fresh and so clean clean.
I'm so proud of myself for pushing through.
Because part of me literally wanted to just cut everything out.
And just throw my.
Just like should I rock my natural hair?
Like I really thought about it.
But this is what my hair ended up looking like.
I did dip my ends in hot water to get a little movement back there.
And I'm not going to lie.
My little color situation did give me some creative direction if you will.
But as always if you guys are loving me.
If you're loving me.
Going to keep it pushing.
Keep it real Z.
Do not forget to subscribe down below.
So you never miss an upload baby.
What are you doing?
And I'll see all you beautiful resilient people in my next video.
Bye loves.
