NO TOOLS Paperclip Heart Rings DIY Tutorial

Hy Tech Industrial
76 followers
18 Video Views·Oct 28, 2022
Today we're making paperclip heart rings without tools. All you're going to need are a few
household objects and your regular size paperclips. To get started we're going to open up the
paperclip and just push out the bends with our thumb until it is straight and then we're going
to get another paperclip, open it up and form a little spring in the middle of the first paperclip.
This is going to be our homemade tool so we're going to use that tool to make the double heart
ring. So we'll put it on the end of a straightened paperclip about three quarters of an inch from the
end and we're going to just start forming a curve of the heart. So curve it around and then flip it
and we're going to do a sharp bend for the middle of the heart. Twist it again and then we're
going to bend it a little bit more and now we're going to form the curve on the other side. So you
just go slowly, push the spring along as you go and it's going to make a nice little curve. This
wire is very stiff so this helps to make the curves and the bends. Remove the spring and then we're
going to go to the other side and do the same at about a three quarters of an inch. Give it a sharp
bend to make that little middle bend. Push it a bit with your fingers to make it sharper and then
slowly curve it around to make that top of the heart. Twist the little tool as you need it,
bend it around and that's going to start the heart and then we're going to do the other side.
Push it around slowly, go very slowly to make a nice smooth curve and that way we'll have two
hearts on either end of the wire. Push the ends in so that they go flush so the little end is
closed. Push it in with your thumb and your finger, the other side too. So that's your base and then
get a marker or any round household object and we're going to bend it around. You can also use
the lid of a nail polish bottle, a toothpaste container or even a stick to make the round form
of the ring. So now there you go and it looks really cute. For the second ring we're just going
to do a single heart in the middle. So what I'm going to do is measure the length of the paper
clip and then fold over a paper just to indicate the middle. Do a little line and then we're going
to put our little tool on the paper clip and bend it right in the middle so it's nice and centered.
So bend it up and make it a little sharper as you need and that's the first part of the heart.
And then we're just going to tug each end to one side to form a little loop. I call these my mimi
hearts and we're going to put the little tool back on and bend it slowly, curve it around
to form the top of the heart. The trick is to go slowly so it makes a nice even bend.
So that's one side and then flip it and we're going to do the other side. So put the little
spring on there and very slowly just curve it around until we have a heart formation.
So go around slow until it's nice and even and then what you're going to do after that is remove
the spring, tug it a little bit so the wires go to either side and then get your round form,
bring the ends around to form the ring, give it a good push, remove it and then you're just going
to have to bend these a little bit to straighten them out a little bit. And then the ends are a
little too straight so put your little spring back on there and just towards the end do some little
tiny bends to curve it out. This would be very hard to do with your fingers so this little spring is
super handy. Bring it around and around just a little bit and that's the ring. Push the wires
past each other to straighten them out back on the ring form marker whatever you have and there's
your second ring. Now for the third ring we're going to start at the bottom of the heart. Same
thing we're going to center the wire and this time just bend it up with my finger and then curve it
around a household object like a pen. You can use any little round object that you have around.
Twist the ends right around there. You can use a knitting needle, crochet needle, a nail,
chopsticks, a bamboo skewer, a pen or the end of a paintbrush for this. So now for the third ring
we're just going to curve these around with your pen or whatever you're using and just to make them
a little bit rounded to form the top of the heart. And so once you have those even just wiggle them
around so they're flush and then put it on your round form for the ring. Bring the ends around as
we did with the second ring and then same thing we're going to just slightly curve these out so
they're not sticking out too much. Just curve them around. If you're using a longer wire or paper clip
you can even make little loops in the end of the wire to finish them off. Now just bend it in place
make sure it's even, wiggle it around as you need and there you have your beautiful heart ring.
