iPhone 6 Logic Board Motherboard Replacement How To Change

Finger Family
30 followers
2 Video Views·Oct 28, 2022
"iPhone 6 logic board motherboard replacement. How to change the logic motherboard in the iPhone 6 to get rid of iCloud lock. iPhone 6 logic motherboard replacement repair. Change the logic board motherboard to get rid of iCloud lock as long as your new board doesn't have iCloud lock. I hope this video helps you in successfully changing the logic motherboard in the iPhone 6. Smartphone repair do it yourself DIY is the way to go.
http://ebay.to/1LuuSyX here is the best place I found to get a logic board just make sure they are clean to activate.
http://amzn.to/2gwN1Gp here is a premium tool kit in the $28 price range that I recommend that is very well put together and has most everything you need."
Hey guys so today I wanted to make a video to show you how to change the logic board in the iPhone 6.
So during this process we're going to be using a few different tools. One of the tools that I'm
going to be using is a suction cup tool and I'll explain in a bit how this works. The other things
that we're going to be using is a phillips screwdriver size 000 and we're going to be
using a small torx screwdriver size 0. So I'll include links in the video description for these
tools that I'm going to be using to work on this or any parts that I'm going to be using during
this process. I'll include links in the video description for them as well if you want to check
them out. So first what we will need to do is in the bottom right down here there's two little
screws and we're going to need to use this torx screwdriver and we're going to need to remove
these two screws right here. So next what we will do is we'll use this handy little suction tool.
Now you can use another suction cup like these ones if you want and you can just put them on
the front here but it's a lot easier to use this tool. They're not very expensive at all and you
can get these tools and what they do is they attach on the front and the back like this. Now
what you want to do is stay as close to the home button as you can down here and if you have a
cracked screen or anything like that you just can put a piece of tape over here like packing tape
and then you have something to adhere to. So what we're going to do is just gently pry up
on this screen. As you can see mine came apart just like that. Now if you have to you can use
a little pry tool to pry in here. I have a little plastic pry tool like this and what you have to
if you need to to get it started a little bit you can pry right under here just a little bit
and then once this thing lets loose you can just go ahead and remove it. The next what you need to
do is carefully pry up on the screen here and then there's this plate right here and there's
five screws and you're going to want to remove those and make sure you keep those screws in the
right order because some of them are different sizes. So next what we're going to want to do
is remove this cover right here. I'm just going to use a tweezer so you can see easy enough and
then what we're going to want to do I like to use this plastic pry tool because that way I don't
short anything out for sure. You can use your fingers even if you want your fingernails but
just go ahead and loosen this connector right here and then just go ahead and loosen the
connector right behind it and then this one over here just kind of in order as they come up that
you can take these apart and so there's four connectors and then the back the whole screen
comes off just like that. So next what we're going to want to do is remove these two screws right
here the battery plate cover and they're both phillips screws and you want to make sure to
keep track of them because they're a different size. Then we can go ahead and remove this plate
cover just pulls off of there. So next what you will want to do is remove this connector right here
remove this connector right here for the battery get it out of the way and then we're also going
to want to disconnect this antenna wire right here carefully. So next what we will want to do
is remove the sim card tray just go ahead and get rid of that and then next we're going to use a
phillips screwdriver and we're going to start down here and we're going to remove this screw
and then these screws here all the screws that we can see up to here we're not going to worry
about from here over for now but for now let's get all these right here and then you're also
going to need a flat screwdriver and remove this screw right here with a flat screwdriver. Now make
sure to keep these all in the right order because they're all different sizes. Next what we're going
to want to do is remove this little cover for the camera right here and then we're going to want to
take something either a fingernail or plastic pry tool and remove this connector right here for the
rear camera. There's also this little black piece right here beside the camera that we're going to
want to set off to the side and then if we pull up on this just wiggle a little bit the rear camera
should pop right out and then this will expose another screw right here that we're going to want
to remove and then we're going to want to remove these two screws here and then these two screws
here. All these screws that we can see on top here we can go ahead and remove along with that one.
Next what we're going to want to do is remove this shield right here. This will expose one more
screw here which we'll need to remove and then also right up here straight up against the top
right here is another screw that we're going to want to remove as well. So then we can grab this
part right here and pull it off and then there's also this little plastic part here that we can
pull off. Then we have one more screw to remove right here. Next we can pull this little part
right here off. Next what we're going to want to do is disconnect these connectors right here.
There's these two. Then next we should be able to pry up right here. Just lift carefully and our
logic board is free to come out just like that. To reinstall the logic board just grab your logic
board make sure these connectors are pulled back out of the way. Just kind of set it right down
in here. It should set down nice. Then let's go ahead and reconnect these two connectors right
here. Next what I would recommend to secure the logic board is put this one here in the bottom
and then put the one here that uses the flat screwdriver to install right here. Next what I
recommend is putting these two pieces in right here. That one and the one right here. Then go
ahead and put the screw in that goes up against like this for this one right here and then we'll
go ahead and put the screw in right here. We also need to put the screw in that goes right here.
These two that are right beside each other we're going to put up with that screw in as well.
Next we're going to want to grab this shield right here. Set it right down in there and then
we're going to want to put these three screws in right up in this corner. We're also going to want
to put this screw in right here and then this screw right in here in the middle and then we
can grab this plate right here and set this right in there and put the two screws in there. Next we
can put one more screw in this black plastic part right up here. Next what we can do is set this
little piece down in right in here. Make sure it sits down in there the way it's supposed to be
and then put this screw in this screw in and this screw in. There seems to be a lot of screws to keep
track of but hang in there we're almost done with the screws. So now grab your rear camera
set it right down in there where it goes it kind of presses down in then reconnect the connector
make sure it presses down firmly then grab the shield for the camera just set it right down there
on top of there and put those two screws back in. Next what you will want to do is reconnect this
antenna wire right here now it's a little tricky sometimes it takes a little doing to get it
and you'll just hear it snap right on make sure it's nice and good there then you can just grab
your battery connector pop that in grab this connector put that in and then grab your battery
plate connector and put your two screws back in. To reinstall the screen just grab the screen
set it right down in here and just start connecting the connector that's the furthest down
and just keep going in order middle one next then this one over to the side here
you can kind of feel them firmly snap into place there you'll need to grab your shield
right here and go ahead and put all five of those screws back in. Now if it's easier what you can do
is if you get a couple screws in to hold this in place you can kind of pull the screen off the
side here just be careful to not pull it too far so you can just rest it down and put the rest of
these in. So to put your screen back in just grab your phone and if you kind of tip this up right
here this is a little hard to see because I still have a screen protector here but just kind of
tip it up a little like this keep it apart and then get the top started down in here first
and then you can just kind of press the screen in and just work your way down around make sure
that it's in all the way around and go ahead and put your two screws back in in the bottom
there you go guys you're all set thanks for watching!
