Photoelectric Effect - A-level Physics

Kiki's knowledge delivery
10 followers
5 Video Views·Oct 27, 2022
The photoelectric effect, you might have guessed, involves two things, light and electrons. It's
actually the main piece of evidence for the quantum theory of light. That means that it proves that
light acts as a particle. Incidentally, Isaac Newton was the first person to come up with a
quantum theory of light when he thought that light travelled in little packets called corpuscles,
but he thought that they had mass. But then a guy called Huygens, or if you want to pronounce
it properly it's Huygens, he came along and said actually it acts like a wave and we see that with
diffraction. But this is the main piece of evidence that light acts as a particle. That means that
light comes in discrete packets of energy and we call these photons. Now the energy of one photon
we find out is equals to hf, f being the frequency of the light and h being Planck's constant. That's
6.63 times 10 to the minus 34 joule seconds. Albert Einstein was the one to revive Newton's
particle theory of light, but with a few changes. Einstein and people after him did experiments with
light and electrons to prove that this is the case. What we find is that if we have a piece of metal,
now we know that metals are lattices of ions surrounded by delocalised electrons, what we find
is that if we shine light at a metal we actually see electrons being popped off. That's an electron
and that's an electron. Now this would make sense with a wave theory of light, but the problem is
if the wave theory of light was correct, or it was the only correct model for light, then we should
see electrons liberated that is jumping off the surface of the metal with any frequency of light
so long as it's bright enough. If light just acted like a wave then we'd have a brighter light and
more waves coming in and they'd be absorbed by the electrons. The electrons get the energy from the
light and they would be liberated, but we do not see that being the case. Now when these electrons
are liberated from the surface of a metal they have kinetic energy so they're able to move away
from the metal because they have this kinetic energy. The question is how do we measure this
kinetic energy? Here's the setup that we have. Now this is an evacuated tube because we want
electrons to jump from one plate to the other without bashing into anything else so no gas is
allowed in there. What we do is shine a light on this plate here. What happens? The light comes in
and it's absorbed by the electrons on the plate and they jump off there. What do we have? We have
a current being set up in the circuit. Forget about this battery for now. So when we shine light
electrons are liberated off the surface of this metal they jump to the other side and we have a
current being set up here and we measure a current with our ammeter. But how can we measure how much
energy these electrons have? We incorporate a battery into our circuit. If we have a battery
set up this way around then it's actually going to try and stop the electrons from reaching this
plate here and that's what we do. To measure the kinetic energy of electrons what we do is turn
the voltage up on the emf on our battery until no electrons reach the other side
or reach the other plate. What we've hit is our stopping potential. Call that Vs. Now we know that
any voltage is energy divided by charge. This energy therefore that's supplied to the electrons
that should match the kinetic energy that they have coming off this plate here. So let's just
rejig this a little bit. Vs the stopping potential is a potential enough to counteract
the kinetic energy. That's half mv squared divided by the charge. Now the charge of an electron is
e. So that's ek that's kinetic energy divided by e. Therefore the kinetic energy of an individual
electron can be calculated by doing the charge of an electron times the stopping potential. 1.6
times 10 to the minus 19 times whatever potential we need to stop the electrons jumping this gap
here after they've absorbed a photon of light. Now I've left a little space here because I need
to put in here ek max. Now we put the max in there because we really are only concerned about electrons
liberated from the surface. Electrons can be liberated from maybe one layer down two layers
into the metal. We only care about electrons that are coming right off the surface of the metal. If
that's the case then they're going to have the maximum possible kinetic energy to jump this gap.
So that's how we can measure the kinetic energy of these electrons. So let's see what happens
when we now change the frequency of light that's coming onto this plate here and we measure
the electrons ek max. Now what we see happening is when we have a very low frequency we get
no electrons liberated at all. So we have a flat line and that will carry on being flat
if we increase the frequency until we hit a certain frequency and then all of a sudden
electrons will start being liberated and the higher the frequency the more kinetic energy
they get. We call this frequency here the threshold frequency. Now why is that? Why do we have to reach
a certain threshold frequency before we start getting electrons being liberated? That's because
if we extrapolate this line down here we end up with a negative energy and we're going to call
that minus phi. This energy here is the energy needed to liberate an electron. In other words
if we have this frequency of light here the photons do not have enough energy to give the
electrons to liberate them from the surface of the metal. It's only after we hit this threshold
frequency that we start getting electrons being liberated. This energy here is always the energy
that an electron needs to be liberated and then any energy it has left over it's going to have
as kinetic energy. So now we have a straight line graph. Any straight line graph is y equals mx plus
c where m is our gradient c is our y-intercept but in this case we don't have y we have ek max
equals now it turns out that the gradient of this line is Planck's constant itself
times x which is our frequency in this case our y-intercept is minus phi. So people find
this equation fairly confusing but it really isn't. This here is the energy left over for an
electron after it's been liberated. This is the energy given to it by the photon and this here
is the energy needed to liberate it. Energy equals energy take away energy. We calculate the energy
left over as kinetic energy by taking the energy given to it to begin with by the photon take away
energy needed to liberate it that's what we have left over. So this is our photoelectric effect
equation. Now we know that when we hit the threshold frequency then the photon's just
giving the electron enough energy to be liberated but it's going to have no energy left over. So we
can say that in this case zero that's no kinetic energy equals hf minus phi but f is our threshold
frequency so that means that our threshold frequency is equals to phi that's the work
function divided by Planck's constant. Phi this energy needed to liberate something is what we
call the work function of a metal that's going to be different for every type of metal. So what
did the photoelectric effect prove? First thing that it proved is that higher intensity that's
more photons did not increase the kinetic energy of the electrons so that must mean one photon
is absorbed by one electron. In other words you can't have two photons being absorbed by the
same electron and therefore it having twice the energy that doesn't happen. So like we said earlier
as well that means that light exists as quanta. In other words it exists in tiny little bits
of energy not just one big messy wave it is specific individual bits of light known as
photons. I hope you found this useful if you did please leave a like and if you think I've
missed anything or have any questions please leave a comment down below and I'll see you next time.
