Magnetic Fields, Flux Density & Motor Effect - GCSE & A-level Physics

Kiki's knowledge delivery
10 followers
7 Video Views·Oct 27, 2022
You probably know that if you get a magnet it has a north and a south pole. You're probably aware
that if you have some iron filings or some mini compasses and things like that then they will
line themselves up along these otherwise invisible lines. We can call these lines magnetic field lines.
Similarly to the field lines for gravitational fields and electric field lines the magnetic
field lines actually show the force on or the direction that a tiny north pole would take if
we can put it that way. That's why the field lines always go from north to south. Magnetic field lines
never break and they never cross either so they are always one complete loop. So that must mean
that inside of this magnet all of these field lines actually carry on and they create a whole
loop. That also must mean that these field lines that come out here must ultimately come around to
the other side as well. The direction of these field lines always go from north to south so we
can draw arrows on them like so. You probably also know that when you have two magnets that are next
to each other when you align them in the same direction so the north pole of this magnet is
facing the south pole of this one they actually attract each other. If we were to draw the field
lines we know that field lines go from north to south so they would actually just go straight
from this pole of this magnet to the south pole of this one. Ultimately what you'll find is that
you've made a big magnet using these two magnets. Again these field lines are unbroken they're just
invisible as it were inside of these magnets again. Lastly if we have two magnets whose poles
are facing each other so north and north then we know that the field lines can't go from north to
north pole but also they're not going to be flying out like the top one up here because this magnet's
getting in the way. What happens is that if you bring two north poles together field lines will
almost touch the middle not quite they sort of get more compact because they're being repelled
by the field lines from the other magnet. The closer you get these two magnets together
the more dense these field lines become and you probably know that the closer you get them
the bigger the force that's trying to push them apart. That's actually a really important point
is that the more dense the field lines the more dense the flux density. We'll get on to what that
means in a minute. That means the bigger the force the certain objects are going to feel at those
points. Let's take a step back though what do we mean by north and south pole? When magnetism was
discovered that such materials actually lined themselves up so that one end of an object pointed
towards the north pole of the earth and the other one pointed towards the south pole of the earth.
So what did they call these two poles then? They called them the north facing pole and the south
facing pole. That's where north and south comes from. So we write n or say north pole for short
but in reality that means north facing this means south facing. Again we know that these field lines
go from the north pole of the magnet that's the north facing pole of the magnet to the south
facing pole of the magnet. Here's where it gets a little bit weird though as the earth acts as
one giant magnet as well that actually poses a problem because we know that two north poles
will repel each other. So this here is geographical north this is geographical south
but if the earth does act like one giant magnet then that must mean that in fact the geographical
north and north pole of the earth is actually its magnetic south. Unfortunately there really is
no way around this it's just something that has to be true but it's really important. Therefore
which way do the field lines go for the earth? They actually go from the Antarctic to the Arctic.
That has to be true if we want our magnets to line up the right way in order to call them north
facing and south facing. But from now on we're going to drop the facing part and just call them
north and south poles. If I have just a circle a certain area and I want to know how much
magnetism I have going through it in other words how many field lines as it were then I can draw
my magnetic field lines going through like this. I know there has to be a north pole over here
somewhere and a south pole over here somewhere because field lines go from north to south but
I don't have to draw those. What about if I draw the same thing and then I draw these field lines
going in. We can see that there are more field lines closely packed together so that must mean
that we have more magnetism as it were and we call this amount of magnetism flux. It has the symbol
phi which is a greek letter and the unit is wb which is short for Weber. How tightly packed
together is my magnetism here compared to here? Well let's say that these field lines here are
twice as compact as these field lines here. I can say that the flux density here is greater than the
flux density here. How tightly packed together are these field lines this flux? We call this flux
density and it's given the symbol and it has the unit t for tesla named after Nikolai himself. How
do flux and flux density link together? Well when we talk about density of materials we take the
amount of mass and we divide it by the volume that it takes up. In this case we're not dealing with a
volume though we're dealing with an area. How much magnetism, how much flux is going through this area
here? I'm going to call that a. Flux density is equals to the flux divided by the area. So you
might be able to see that the alternative unit for this is going to be Weber's per meter squared.
That means therefore flux is equals to BA and this is an equation that we're going to see
time and time again. Electricity and magnetism are very closely linked. They affect each other.
If you have a piece of wire and have a current flowing through it, I'm going to call that I,
then you might know that that will create its own magnetic field around the wire. Whenever we have
a wire and we draw an arrow showing current this is actually what we call conventional current.
This is the opposite way to which the electrons are flowing in the circuit. That's something that's
very important later on when it comes to free moving charges. You can think of conventional
current as the way that positive charge moves in a circuit. This actually creates a circular
magnetic field which form continuous loops around the wire. But which way are the field lines going?
Are they going this way here so it's anti-clockwise or this way clockwise? Well Maxwell came up with
a rule called his right hand rule or the corkscrew rule. He said if you get your hand like this
and you curl up your fingers like that, your thumb is the direction of the current
and the way your fingers curl round is the direction of the field. We can see in this
case that the current is going upwards. Get your thumb, curl your fingers round like you're putting
a thumbs up and we can see that the field line should be going that way around the wire. If we
have a magnet, two magnets with a gap in between like so, let's say this is the north pole of this
magnet, this is the south pole of that magnet. We don't have to draw the other poles because
they're not concerned with those. Which way would the field lines go? Well they should go north to
south. If you actually take your wire with a current flowing through it like so and you put it
in this magnetic field, because this wire with the current produces its own magnetic field,
we actually have two magnetic fields that now interact with each other. What we'll find is that
the wire will move because there will be a force which acts on the wire. If the wire was held still
then the magnets would move in the opposite direction. But for now let's just think about
the magnet staying in place and the wire being free to move. This effect is called the motor
effect. Whenever you see motor that means that something is going to be moved and that's what's
happening here. We have a current in a wire that's in a magnetic field and that wire is going to move.
Which way is it going to move? Well we need another rule using our hands but this time it's
left hand rule. If you can't tell that is actually a hand that I've just drawn.
And we're only concerned with the thumb, the first finger and the second finger. Now this is in 3D
so we're talking about the thumb going upwards here, first finger going to the right and the
second finger here actually coming out towards me or coming out towards the camera. So if I can put
it like that you can see. Now the easy way to remember which finger represents what in this
situation. The first finger begins with an F and that actually tells you the direction of
the magnetic field. The second finger has a C and that indicates that that's the current. It's not
the most convenient way of remembering but it will help. And then finally we have the thumb
which is the thrust. Obviously that's what the force is, that's the direction that the force
is going to be exerted on this piece of wire. Which way is this wire going to move? I can see
that the current is going that direction, field is going from north to south in that direction
and my thumb is pointing upwards so that means that the force is going to be upwards. The wire
is going to move upwards due to the motor effect but there is also Fleming's right hand rule as
well. But the left hand rule is used for the motor effect. How can we remember this? Well the way I
remember it, motor cars drive on the left. At least they do here in Great Britain. I'm sorry if
you're in a place where cars drive on the right hand side but in Britain that's how we can remember
it. Motor cars drive on the left so when we are dealing with the motor effect, that's force being
supplied to a wire carrying a current, we use our left hand rule. So how can we calculate the
magnitude of the force? How many newtons? It's as simple as F equals B I L or F bill. So the
force on a current carrying wire is the magnetic flux density times the current times the length
of the piece of wire. Incidentally, as an aside, if we rearrange this for B we find that flux density
is force over current times length. So an alternative unit for flux density is newtons
per amps per metre. This gives us another insight into what flux density is and how it can be
calculated. Flux density is the amount of force exerted on a piece of wire that's one metre long
carrying one amp of current. This is only true if the current and the flux density are at right
angles to each other like with Fleming's left hand rule. If the field and the wire are both in
the same direction then we have no force. So they have to be perpendicular to each other and you
might realise that if the wire was at an angle then we'd have some component of F bill and that
would be times cos theta but we'll leave that one for now. Because we're dealing with three dimensions
we actually have to find a way of representing three dimensions on a 2D plane, a piece of paper.
If you're drawing in 3D then we need to think darts. If you have a dart like so what do you see
if a dart is coming towards you? You see just the tip and so if we draw a dot that means
that the dart is coming out of the page or out of the plane. If the dart is going away from you
well you see the cross of the flight so we say that's into page or plane. More often than not
it's the magnetic field that will be drawn using this dot and cross method. So let's say that we
have a field going into the page we draw a few crosses like that so we can say B that's the
magnetic field the flux density into page. Now if you introduce a piece of wire with the current
flowing that way again we're talking conventional current that's the flow of positive charges
but in a wire we just call it current. Can you predict using Fleming's left hand rule that's
thumb thrust that's force first finger field second finger current can you predict which
direction the force is going to be and therefore which way the wire is going to move in this
situation. Give it a go yourself now pause the video if you need to. So if we orient our left
hand then we have the field going into the page so let's stick our finger that way that's going
into the page our current is going to the right so that means our thumb is left going upwards
so that means that the force is going to be acting upwards and that's how you deal with the motor
effect you can predict the direction and the magnitude of the force on a current carrying
piece of wire in a magnetic field. So if we can find out the magnetic flux density of magnetic
field at a certain point by just measuring the force the question is how do we actually measure
the force. Well there's a very easy way of doing it what we do is get two magnets and attach them
to a bracket just like this. Let's say that this pole here is north and this pole here is south
so we know that the magnetic field lines are going to go from left to right. So if you put this on
a top pan balance like so and then we tear it first so with nothing going on we just have
zero zero kilograms on here after we've teared it. Then what we do is get a piece of wire
as part of a circuit and we pass a current through it and we put that directly in between the two
poles. Now we know how long the length of wire between the two magnets is because that's just
going to be the length of the magnets themselves and we can measure the current as well but before
we put on the current let's figure out which way we want this top band balance this wire is going
to be clamped in position so it cannot move. If it can't move but there is a force exerted on it
that means that there's going to be a force exerted on the magnets instead and they are going to be
downwards. So let's have a think we want the force to go upwards on the wire see if you can predict
which way we want the current to go in this wire. So we want the force to go up and we have the
field going left to right like that so we want the force going upwards field is going that way
therefore we want the current to be going this way through our wire so that is the direction
of our current. If we have a force pushing upwards on here that means that we have a force
pushing equally down on the top band balance down here. So let's say that once it's turned on
our balance actually measures a mass of that 0.05 kilograms or 50 grams. Now we know that that's a
simulated mass the only reason that the top band balance says that is because the magnets are
pushing down more than they should do just from their weight. We can say that because we know that
F equals Bil we're going to use big L here that means that if we measure a mass on here we can
say that mg equals Bil. Using this we can just rearrange this to find that the magnetic flux
density is equals to mg over il. Let's pop some numbers in there just to make sure that we know
what we're doing. Let's say that we have one amp of current going through there and we know that
the length of the wire that ends up being 0.1 meters so 10 centimeters then we know that between
these two magnets we have a magnetic flux density of 0.05 times 9.8 divided by 1 times 0.1. That
gives us a magnetic flux density of 4.9 teslas. Now in reality this is way way too big. Usually
when we have magnets we have a magnetic flux density of milliteslas or microteslas. When you
do this as a required practical as per usual there is a way that we can find out the magnetic flux
graphically. Because our equation is B equals mg over il we can draw a graph of mass that the top
band balance says that we have against the current in the wire. You could also do length of wire
that's going to change it see if you can figure out how it would be different. That is going to
give us a nice straight line graph. What is the gradient of this going to be equals to? It's going
to be m change in m change in mass divided by change in the current like so. Therefore if you
know that that's our gradient there pop up back into there we see that we can calculate the flux
density by taking our gradients our graph because that's equals to mass divided by current times
that by g 9.8 divided by the length of the wire. And that gives us a much more accurate value for
our flux density. So as per usual if you think I've missed anything or you have any questions
please leave it in a comment down below and I hope that you found this useful. If you have make sure
you leave a like and if you're okay with a force on a current carrying wire then it's time to look
at my next video which is force on a free moving charge in a magnetic field. I'll see you there.
