AQA 2021 Paper 3A - Practical Skills - A-level Physics Past Paper

Kiki's knowledge delivery
10 followers
2 Video Views·Oct 27, 2022
Okay this is AQA A-Level Physics 2021 paper 3A that is Practical Skills. As per usual can't show
the paper on screen because otherwise AQA will get the whole channel deleted like they almost
did in the past but links to paper and mark scheme are in the description. If you find this helpful
leave a like and if you really find it helpful consider clicking that super thanks button to
Okay question one we have inverse square law experiment then we have the source of 138 mil
off the bench. Okay so what are we being asked? 1.1 Describe a procedure for the student to find
the value of d and we want to annotate the diagram as well. Okay nice and easy well all we do is get
a ruler that is on the bench like that zero is on the bench then we have our source there on the
clamp and there's the detector and so we're looking for this distance here so we're going
to use the ruler of course but we can't just eyeball it no we want a set square like that
whenever you are measuring things that aren't in front of each other we want a set square
so use a set square and ruler touching bench and we could say to find L total distance
and then we can say that the distance is L take away well 138 millimetres.
For the sources brought into the room background count so we have the background count of 630 in
15 minutes so let's have that in seconds I guess yeah yeah let's do that so 630 divided by 15 times
60 so in other words divide by the number of seconds in 15 minutes so in other words
tie it by 900 and that gives us 0.7 counts per second or becquerel. Becquerel activity
cannot be count doesn't really matter it's all per second. Okay so we're trying to find
the mean count rate so we're going to say that the mean count is going to be 90 plus 117 plus
102 we're finding the mean that will be divided by 3 but if we're looking for per second let's
do 3 times 100 so divide by 300 and then why not let's do it all in one go let's take away
the background count as well so the first bit is first bit is becquerel second bit is becquerel
as well and sure enough that gives us 0.33 oh they've gone with just per second yeah that
makes sense. 1.3 apparatus is adjusted to a different distance we now have rc of 0.76
counts per second student predicts that rc is equal to k over d squared we know that's true
which should be true anyway well maybe we do have a slight we are going to have maybe a systematic
error anyway explain whether the values of rc support the student's prediction so earlier we
530 mil and that was a count rate of 0.33 and then d2 is equal to 380 and then r2 is 0.76
so there's a few different ways we can do this but let's just find out k for both of these
so k1 is just going to be equal to well it's going to be rc times d squared so that's just
going to be 0.33 times 530 squared and the 2 sig figs that gives us 93 000 let's do it for the
second lot of data so 0.76 times 380 squared oh doesn't give us that so let's do that no
yes it is going to be the 110 000 so we can see that they're quite different
let's find out the difference shall we so the difference in the case is well i tell you what
let's find the percentage difference in the case that's good because congruent results
basically anything within 10% even then 10% is quite large but let's do 110 well actually we
can just do 110 take away 93 divided by let's go with 93 times that by 100 of course and that gives
us 18 so no we can say that rc is not equal to k divided by d squared because there's probably
some systematic error like we said 1.4 how do we reduce d give a reason well i would say remove
source that's the best thing remove source before handling detector to reduce exposure
i mean that's the most obvious thing to do isn't it so that's we're giving our reason as well
uh of course we're going to lower the detector i mean that's fairly
darn obvious isn't it but you know aqa like us to treat them like idiots which is fairly easy
to be honest uh removing the source i guess we should say with tongs not hands again to reduce
exposure i guess there we go there's a couple of things there 1.5 we have a log graph they have log
rc and we have log of d okay interesting we're being asked to find what the difference is in d
every time to begin with okay so we have our points here so i guess all we want to do is take
two points and then figure out what d is for both so let's take the last two points why not
so we have here the log of let's say d5 there the fifth point is equal to 2.52 and then we have the
log of the fourth point is 2.45 so therefore we just want to delog these and it is log base 10
otherwise it will be ln so 10 to the 2.52 and then 10 to the 2.45 the first one gives us 331
millimeters and we have 282 millimeters so i guess we can say that 331 take away 282 gives us
49 millimeters chances are it's going to be 50 millimeters isn't it 1.6 we're being asked to
confirm with the graph or how could we confirm it well we're going to use our log identities aren't
we so we're going to say y equals mx plus c say log of rc is equal to m times the log of d so
well let's put brackets around there plus some unknown constant we know that's going to be
ultimately the log of k but if you didn't know that to begin with you probably could have figured
that out in a minute so we're going to combine these on the right hand side so the log of i'm
just going to call it r for now log of r is equal to well let's do the first one log of d to the
power of m we know ultimately that's going to be 2 don't we plus the log of k and then finally we
say the log of r is equal to the log of all of these times together oh i guess i was wrong about
it being k it's actually 1 over k but there we go so let's call this something like n for the
time being shall we log of n d to the power of m so therefore just well if we have log on both
sides that means that d log in both sides rc is equal to nd to the power of m so therefore we can
say that if this has to ultimately be k over d squared that means that well if m is the gradient
if the gradient is equal to minus 2 and we have our constant as well but it's the y-intercept is
the log of n isn't it so therefore if y-intercept is equal to the log of well it's not going to be
k is it it's going to be 1 over k not a super easy question that one because it sort of almost
goes backwards the usual way that we do those kind of questions 1.7 we have this equation
r1 is measured count rate r2 is the count rate when r1 is corrected for dead time error okay
great the distance between the source and the detector is adjusted so the d is very small
and r is okay so r1 is 100 counts per second on average two of the gamma photons that enter the
detector every second are not detected right okay so r1 is that so therefore two are not detected
so it's 102 that's the corrected rate okay so therefore td is going to be equal to this is a
weird question 102 take away 100 divided by 100 times 102 so in other words 2 divided by 1.02
times 10 to the 4 that's basically going to be almost 2 times 10 to the minus 4 isn't it
so that gives us 1.96 times 10 to the minus 4 seconds weird 1.8 student says that if 100 gamma
photons enter a detector in one second all the photons should be detected explain the reference
to the nature of radioactive decay well thus this idea is not correct well of course decay is random
therefore some photons may arrive sooner than was it 0.01 seconds after previous
photon there we go happy days question two led emits narrow range of wavelengths these wavelengths
have their wavelengths are distributed about a peak wavelength two leds lg and lr are just to
give the same maximum light intensity lg is okay right so we have this crazy what do we have is
that which one's green which one's okay that's green and that's red this is lambda this is
intensity okay what are we being asked life mlr okay this is just a diffraction grating cool
so we know that n lambda is equal to d sine theta we'll deal with the whole lines per meter in a
minute so we're looking for d so d is equal to n lambda over psi theta so that is 35 because this
is the fifth order times by the wavelength this is nanometers so this point here i think that's
635 nanometers so therefore i don't think there's much point changing it so 635 times 10 to the 9
divided by the sine of what is it 76.3 so that gives us three sig figs i think seeing that
the angle is given to three sig figs so 3.27 times 10 to the minus 6 meters we're looking
for lines per meter and so therefore we're just going to do one over that and we get 3.06
times 10 to the 5 lines per meter suggest one possible disadvantage of using the fifth order
maximum to determine n what i would say is that the maximum is less defined or we could say
less intense because it's more spread out therefore harder to determine or we could say
just less accurate value harder to determine theta okay 2.3 we have this graph now of
v against i okay just a vi graph so we have red is there and green is there
and i'm just going to remind myself this is milliamps this is volts okay when the linear
part is extrapolated the point at which it meets the horizontal axis gives the activation voltage
for the led oh okay so all we have to do is just extrapolate this line down to here and that's our
value so i'm going to say that's 1.92 volts 2.4 it can be shown that va is equal to hc over e
lambda p oh yes this is an experiment that we do deduce a value for the plant constant based on the
data so just rearranging this we can just do h is equal to i'm just going to call it v e
lambda over c we've already got the red one so there we go let's just use that so we're going
to say 1.92 times 1.6 times 10 to minus 19 and we said that the wavelength was 635 nanometers
so times 10 to the minus 9 so i think i can combine those i'm just going to call that minus 28
divided by the speed of light which is 3 times 10 to the 8 so actually i can take this down to then
minus 36 so i'm just going to do 1.92 times 1.6 times 635 divided by 3 that gives me 650
times 10 to the minus 36 add that on and so therefore i can say that's 6.5 times 10 to the
minus 34 so there we go we're close to 6.63 times 10 to minus 34 not too shabby 2.5 we have this
circuit here 6.1 volts boop boop boop there's our led whoops whatever power supply blah blah
the current must not exceed so i max cannot exceed 21.0 milliamps okay looks like we're
going to three six fix it so we know we're going to have to use vehicles ir don't we
but we have two unknown resistances don't we the resistor and the led so let's find out
the resistance of the led first we can use our graph for that so we can say that the current of
21 milliamps leads to needs a pd of uh what's that 2.01 volts so therefore its resistance
is going to be at that point anyway the override so there's 2.01 divided by 21 times 10 to the
36 fix shouldn't we so 95.7 ohms there's a couple of ways that you can go about this but i guess we
should probably just find out therefore what the v4r is then going to be so it's going to be that
total 6.1 volts take away the 2.01 volts and so that's going to give us 4.09 volts
and again we know the current is going to be 21 milliamps so 21 times n minus 3 again
so therefore r is going to be equal to v over i so that is 4.09 over 21 oh it looks like it's
going to be pretty much double our resistance of the led doesn't it but let's get an actual value
it gives us 195 ohms not a super easy question though 3.1 we have this voltmeter analog voltmeter
it has a resistance that's much less that's of a modern digital voltmeter right so we have to
take it into account 3.1 the voltmeter is set to more sensitive range and then used in a circuit
what is the potential difference between the terminals of the voltmeter when a full scale
reading is indicated okay so okay so if that error is going to be there when it's like that
but hang on a minute does that mean oh it's a zero error okay it's not to do with its resistance
right so it's going to be there it's just the spring or whatever right so if it's there but
then it goes over to there then that means well the error there was going to be 0.3 volts and then
it should be 3 volts over there but it's not it's going to be one take away the other and so that
gives us 2.7 volts what a weird question it's the whole deal with the more sensitive bit they're
just trying to throw us off blooming jerks so we're going to explain the use of the mirror
when reading the meter that's an interesting one so it's to avoid or eliminate parallax error
reading is correct when image lines up with needle or we can say or is obscured
completely obscured in other words it's behind the needle so we can't see it
okay now we have this pretty complicated circuit variable power supply we have point y there
capacitor flying lead going to there we have 15 volts potential and we have a
zero of potential okay what are we doing here the output of pd is set to zero
student connects the flying lead to socket x which is there the student connects the flying
lead to socket x and adjust the output pd until okay so we're just increasing the pd disconnects
so that c discharges to the voltmeter measure the time t half of the voltmeter reading oh
interesting so we are using a half-life as it were for this capacitor here so we have the
readings we're being asked to find the percentage uncertainty in t half that's fairly easy
percentage uncertainty in a mean is just going to be half the range divided by the actual mean
times by 100 so that is going to be uh 12.16 take away 11.94 divide that by the mean so we're going
to divide by well we need half the range don't we so i'm going to do divide by two times by 12.04
then times by 100 so i do believe that 0.22 divided by two so i'm just going to call that
0.11 divided by 12.04 times 100 and we end up with 0.91 percent 3.4 show the time constant
for the discharge circuit is about 17 seconds all right interesting not often we have to
deal with half-life with capacitors so half-life is 12.04 seconds let's crack out the uh actual
equation shall we see v over v zero is equal to e to the minus t over r c we're looking for r c
and this is obviously a half isn't it and this is 12.04 so log in both sides we have the natural log
of a half which as you know is the same as minus log 2 so therefore r c is equal to minus 12.04
divided by minus log of 2 just cancel those minuses so 12.04 divided by log of 2
natural log that is that's fine and i get 17 point let's just say 70.4 seconds 3.5 student
thinks that the time constant is directly proportional to the range of the meter interesting
okay to test the theory she repeats the experiment with a voltmeter set to the 3 volt range she
expects t half to be about 2.5 explain what the student should do before connecting capacitor c
to the 0 volts and 3 volt sockets to avoid exceeding the full scale reading on the voltmeter
okay so it's 15 volts if it's charged so we need to discharge the capacitor first of all
by connecting flying leads to y uh what else we're being asked develop a procedure to get an
accurate result for the time constant oh i don't know i guess we should well secondly we need to
reduce output pd or output v to 3 volts uh how to develop the procedure i guess we could just
take several reasons for t half so let's obviously go into 1.5 volts is that all is that okay
and calculate average again it's not really developing the procedure is it
it's a bit weird uh of course we need to mitigate that's a posh word and we need to account for
zero error and then how she should use her result to check whether her theory is correct
well if correct t half should be one-fifth of 12.04 seconds because it's a fifth of the pd
so there we go if it's proportional if t half is proportional to v or v max let's say
oh gosh take a three love it all right student wants to find the resistance of the voltmeter
when it's set we have a capacitance of 820 microfarads we have a v zero of 15 volts
and then we start it when it's oh okay so no we don't care about that interesting oh yeah so v
zero is 14 volts instead right 3.6 suggests two reasons why the student selected the values of v
shown in table two i guess we could say first of all well we could say that it's a large range
of pds and we could say therefore do not need to obtain readings between markings
it's a weird question i've got to be honest we haven't gone for 15 when i do this experiment
with my lot i tell them not to start the stop clock when they connect it so we can say does
not have to start stop clock as she connects or as she starts discharging that could result
in inaccurate time zero or whatever i'm done 3.7 we have this graph now good we have a log graph
log of v there and we have time there we're being asked to find the resistance that's nice
cool cool so we can say of course y equals mx plus c so that's log of v is equal to the gradient
times t plus the log of well we know it's going to be v v zero ultimately and so therefore we
can say that log of v minus log of v zero is equal to mt combining these log v of v zero of course
equals mt and so therefore d log in both sides we end up with v of v zero is equal to e to the mt
this has to be e to the minus t over rc so therefore m is the gradient that is equal to
minus one over rc therefore if we're just looking for r r is equal to just swapping around the
gradient and r r is equal to minus one over the gradient times c taking this over here
therefore r is equal to minus one over i'm going to get the gradient of being something like minus
0.077 so we can forget about the minuses of course and that's times by what was the capacitance that
was 820 microfarads so 820 times 10 to the minus six pop in my calculator i end up with 15 800
so three six six ohms so about 16 000 3.8 determine the current in the voltmeter at time
of 10 seconds so at 10 seconds the pd is or the log of v is what's that 10 seconds 1.875 let's
call that 1.88 then therefore i want just v so we're going to say v is equal to e to the power
of 1.88 and i get a pd of 6.55 volts okay what are we going to ask to find again oh yeah the
current uh we found out just now that r is equal to 16 kilo ohms so 1.6 times 10 to the 4
so therefore i is equal to v over r so that's r 6.55 divided by 1.6 times 10 to the 4
and that gives us 4 point let's call that 4.1 times 10 to the minus 4 amps that's it
hope you found that helpful not a bad paper three i have to be honest quite nice like i said leave
a like if you found that helpful or you can even click that super thanks button to help me keep
making these videos click on the card if you want to go to the playlist with all of the aqa papers
and i'll see you next time
