Mora Bushcraft Black Review: Five years on.

Menu Masters
22 followers
1 Video View·Oct 27, 2022
Hi good morning guys thanks for joining me. What I thought we'd do in today's video is talk about
a knife which I've been carrying now for about four to five years and it doesn't need any
introduction and that's the Mora Bushcraft Black. So quickly just running through the spec of the
knife the overall length of the Bushcraft Black is nine and a quarter inches, it's a little bit
bigger and a little bit longer and also a little bit heavier than the majority of the Mora knives
out there on the market and the steel that they've used is a high carbon steel very similar to 1095
which is called a UHB-20C. So the cutting length of the blade is four and a quarter inches and
that's given us the handle length of five inches and again very comfortable knife to hold just like
the majority of Mora knives always are. So what they've done here just to help you know combat a
little bit of the rusting in the carbon steel and that's applying this coating on it and they call
it a DLC coating or a diamond like coating and again you know it's very durable. There's the odd
bit of scratching and also scuffing but you know after four years worth of work you know that's to
be expected. So we'll quickly just take a look at the spine of the knife and Mora have actually
prepared this one for us directly from the factory. You know what you do notice with a lot
of Mora knives is the fact that the spine itself is actually rounded off a little bit which is no
big deal you know if it has got some kind of companion knife and that's the case it's just
a case of just getting a file and just touching it over quickly which will give you this kind of spine
but like I mentioned just you know with it being a bushcraft knife that was at least something Mora
could do for us so we can have to use it just for processing down firewood and also just using
it in conjunction with your ferro rod. It's fair to say that the majority of people always pick up
the fact that this style of Mora knife has never full tang. The tang itself on this knife actually
goes around about three quarters of the way down the handle and you can just test that out just by
using a magnet. Now if it is that you want to use this knife for the majority of all your camp tasks
certainly when it comes to battening wood you know that's down to yourself. Now I'm not one
of those kind of people that says that you should do it or you shouldn't do it. This knife in
particular here you know I've battened, I've used some fire lighting and that's something I'm going
to show you in a minute which is a one stick fire just by using the bushcraft black. You know my
opinion don't be worried about battening it but also just be careful if you're going to be doing
that. Now the handle itself is a very comfortable ergonomic handle. I've only got small hands you
know so I do find it nice and comfortable to hold but if it is that you've not used one before you
know it might be worth just getting the hands on one if you can just to check that it feels good
in the hand and this Kryton style rubber just over this solid green plastic where the blade
actually inserts into it you know my opinion is a good style and like I say you know I could use
it all day long without any kind of fatigue or hot spots. One thing which does impress me about
the more of bushcraft black you know which it should do is the way which it cuts. The steel
itself is quite thin it's only one eighth steel and again with this 1095 equivalent like I mentioned
it does all the wicked edge but also you can actually get these knives razor sharp. So again
for food prep, cutting cordage, preparing firewood you know this knife will do it all. So I've just
dropped it first thing this morning just before it actually came out and perhaps one thing I haven't
mentioned is the fact that this black coating covers the entire cutting edge and just over the
years just as I've been sharpening the knife that I've now actually lost that which is no big deal
I do actually tend to sharpen a knife just by laying them flat on the stone finding the angle
and cutting them anyway I'm not that particularly bothered about putting a micro bevel back onto it
so losing that coating again wasn't any big deal. So what we're going to do we're just going to check
just how sharp the knife is now and then once we've actually done a bit of work with it later
we can just actually check it again just to see how this knife has held its edge. So just
standard paper here and as you can see you know it's cutting really well like is expected
so what we'll do after we'll just retest it and just actually see just how well it cuts.
So the first job which we're going to use the knife for is actually make a one stick fire or a
one log fire and with that being said we're going to use all aspects of the knife. We're actually
going to batten through this wood to make a little bit of kindling and fuel then going to use the
edge just to be able to make a few feathers and curls and also we're going to use the spine of
the knife just to scrape a little bit of this wood down then also use the ferro rod after once the
fire's been prepared and it's ready to be lit. So after lighting that fire that took around about
three or four minutes something like that you know just after we split the wood down shaved it down
and then just struck the rod just by using the spine of the knife I've just had to extinguish
that fire I'm not looking at you know cooking food or boiling water that kind of thing.
So the next thing you want to want to look at is a couple of notches certainly two which will come
handy as another number seven notch you know if you're making tent stakes that kind of thing
but also the beak notch or the hoot notch if you're going to be making pot hangers.
So as well as carving the notches out which obviously going to come in handy for various
things we could also use the knife if any other carving projects which we may have what I've got
here is just a little spoon which I've been carving out unless you're just a piece of
rowan or mountain ash as it's sometimes referred to and using the bushcraft black to carve this
has been a pleasure the knife's not too big it's not too heavy but with it being razor sharp it
means that the cuts are nice and smooth and with that being said I won't have to use any sandpaper
just to smooth it down with the only drawback with them is when it comes to cutting the ball out
you tend to find it's quite difficult with a straight knife like this hence the reason for
hoop knives or another thing which you can actually do is just put a coal in there and
actually burn its way down what they call coal burning and actually form the ball that way.
So like most of us when it comes to bushcraft or you know just camping in general I do carry
more than one knife with me most of the time it'll be the LT Wright either the GNS or the Genesis
but you know in the rucksack or you know sometimes I will carry this as my primary knife you know
will be the bushcraft black so you know then you can be a little bit more selective about the kind
of work which it is that you can do with it like I showed you just I've just actually battened
through this just to create that little bit of firewood for us but again if I got more of an
heavy duty a knife that would have been the first option and then you could actually just leave this
for a bit more of the delicate tasks like I mentioned you know carving notches the spoons
and also all the other camp chores just like cutting cordage you know food prep if you want
and the likes so I've actually got here there's some paracord and this is my preferred paracord
this has come from wild elk now this is 550 corded woodland camo again my preferred pattern
you know certainly for the British woodland you know this does blend in really well so what we're
going to do here just cut a length off just after that little bit of work that we've just been doing
just to see how it actually cuts the cordage and uh you know that's uh just as good as what it was
when I first brought it down so as you can see there you know that's it that edge is still
wickedly keen so I haven't just got the camera just to pick it up and just move forward slightly
what you'll notice that is you know we haven't got any chips we haven't got any kind of rolls
there's no damage and for those of you which may have watched the video which I did just
maintaining our carbon steel you know what I perhaps may have to do with this when I get in
and just put a small light coat of oil just on the cutting edge you know that should be fine
for those of you which may like the knife but perhaps think it's a little bit too small
then more of that I've got a bigger version of it called the bushcraft pathfinder I think the
blade's around about five inches long and the handle again is a little bit bigger and I think
the roll length's around about 10 or 11 inches but again bigger knife bigger price I think it's
around about 75 pound and again a lot of people do seem to think you know if you're going to be
paying 75 pound you may as well put another 25 towards it and start looking at an entry level
lt right or perhaps an s or something like that just before we start to wrap the video up what
I thought to do like I mentioned beginning now is just check the edge like I said you know it's
rubbing your fingers across it you know plus also there's a good chance of cutting yourself
so just using the same paper as what we did with the beginning and again you know that edge you
know is still as sharp as what it was I may just drop it when again it certainly doesn't need any
work doing to it with the stone but like I mentioned you know if you are looking for a
good quality knife you don't want to be spending a lot of money then probably the bushcraft black
you know is a good knife worth looking at well guys that's it for this one and like always that
leaves me to say thanks a lot if you're stopping by and watching the video like always
until next time you take care and I'll see you again
