How to Make Artisan Sourdough Bread [Step-by-Step Process]

Sweet Bliss Baking Channel
62 followers
176 Video ViewsยทOct 26, 2022
The first step is to prepare the autolyse. Whisk together the flours in a large mixing bowl.
For today's recipe we'll be using a combination of 80% bread flour and 20% whole wheat flour.
Add your warm 90 degree water to the bowl. Please remember that this is the higher hydration
sourdough recipe which can be challenging for beginners. If you're new, I recommend reducing
the overall hydration to 330 grams water or even a little bit less. This will help make
the dough easier to handle and help with additional strength building.
So during this step you really want to get in there. Use your hands to mix the flours and
water thoroughly. Pinch the dough together repeatedly, this is called the pincer method,
and scrape the sides of the bowl to make sure the ingredients are combined thoroughly.
No dry clumps or bits should be visible at the end of mixing.
During this stage the dough will feel very shaggy and sticky. Once mixed thoroughly,
cover the bowl with plastic wrap. I like to use a plastic shower cap which has elastic edges
and rest for at least one hour or up to two hours.
Many sourdough recipes call for creating an offshoot starter or levain.
This is a great way to adjust or tweak a timeline to suit your preferred baking schedule.
I prefer to simply use a portion of my ripe just peak starter in my bread dough.
This eliminates one extra step and works better for my preferred baking timeline.
In order to do this, you'll need to plan your previous feeding accordingly
so that the starter is reaching its peak and due for its next feeding
roughly at the end of the one to two hour autolyse period.
While this test isn't foolproof, your sourdough starter should pass the float test
when it's ready to be used in your dough. Place a very small spoonful of your starter
in some water. It should float to the top. If it sinks, it's not ready to use and usually
requires additional time. Check and test again later. We've now reached the end of the autolyse
period and we're ready to add our ripe just peak starter to our autolyse mixture. At this point,
the dough should already feel stronger. Add the ripe just peak sourdough starter.
I like to lightly dip my hands in water to prevent sticking, but be careful not to incorporate much
water as this is already a high hydration dough. Use your hand to spread the starter over the
surface of the autolyse mixture. Fold the edges of the dough into the center to fully incorporate
the starter. Then use your thumb and fingers to repeatedly pinch and grab the dough until the
is completely incorporated. Again, this is called the pincer method. You don't want to be too
delicate during this step. Work quickly, but you want to make sure that it's thoroughly mixed before
moving forward. Cover the bowl and allow the dough to sit for an additional 30 minutes, at which
point we'll add the salt. After the dough has rested for 30 minutes, we'll add the salt. Sprinkle
the salt over the surface of the dough. I like to dip my hands lightly in water once again,
then fold the dough over to incorporate the salt completely. Use your thumb and forefingers
once again to pinch the dough repeatedly to incorporate the salt. You should not feel
any granules at the end of mixing. You really want to be thorough during this step. Depending
on the coarseness of your salt, the mixing step usually takes about three to five minutes.
This final mixing step is another great opportunity to build strength in your dough.
If you're new to high hydration doughs and struggling to build strength,
there are two great additional methods that you can try.
The first is called slap and fold. Transfer your dough to a clean countertop. Grab the top portion
of the dough and slap it down on your countertop. Fold the dough over, rotate, and repeat. The other
method is called the roubade method. This simple method mimics how a mechanical mixer kneads and
mixes dough. Neither of these methods are required, but are great additional tools
and methods at your disposal if you're struggling with a higher hydration dough.
After mixing, cover the bowl once again with plastic wrap and allow it to sit for 15 minutes
before we do our very first stretch and fold. For this recipe, we'll perform a total of six
stretch and fold sets during the first two hours of bulk fermentation. Complete a stretch and fold,
dip your hands lightly in water. I like to gently rub them together to avoid incorporating too
much water into the dough. Grab the top portion of the dough with both hands. Gently pull and
stretch it upwards without tearing and fold over the opposite edge. Rotate the bowl 180 degrees
and repeat. Then rotate the bowl 90 degrees and repeat once again for both sides. After performing
the stretch and folds, I like to gently grab the dough to round it in the bowl. We'll perform a
total of six stretch and folds over the course of the first two hours of bulk fermentation.
The first three will take place within 15 minute intervals and the remaining three will take place
every 30 minutes. You can be flexible with this timeline, but it's really important to observe the
dough and act accordingly. If the dough feels strong, you can always eliminate a stretch and
fold. If it needs some more strength, add another one in. Cover the bowl and allow it to rest for 15
minutes before performing the second stretch and fold. Ready to do our second stretch and fold set.
You can kind of see that the dough is already starting to develop a bit more strength.
It's slightly rounded on the edges. The volume of the dough will not change dramatically during the
first two hours of bulk fermentation. Perform your second set of stretch and folds. Cover and allow
to rest for 15 minutes. Ready to do our third set of stretch and folds. You can see that the dough
is rounding a little bit more, but there hasn't been much change. Continue to be careful and gentle
as you're stretching and folding as we don't want to press out any of those gases. As you can see,
the dough is developing quite nicely. As I go to stretch and fold, I can see that I can pull the
dough to be very, very thin, but there is no risk of tearing. This is a great sign that your dough
has good strength. After the third set of stretch and folds, we'll cover the dough and allow it to
rest for 30 minutes before performing the fourth set of stretch and folds. It's been 30 minutes
and we're ready to do our fourth set of stretch and folds. We'll extend the time between the last
three sets to give the dough a little bit more time to relax. We're ready to perform our fifth
set of stretch and folds. If you've reduced the hydration on the original recipe, you will most
likely not need to perform this number of sets. You should never feel like you're fighting the
dough as this can cause you to unintentionally de-gas it. If it's strong, do not perform any
additional sets and allow it to rest covered for the remainder of bulk fermentation. We've now
reached our sixth and final stretch and fold set. The dough already has gained a little bit of volume
and is feeling more aerated. Remember that most of the volume changes will occur in that final
stage of bulk fermentation. Here is our dough after bulk fermentation. You can see it's a really nicely
fermented dough. It's risen in volume substantially, it's rounded on the edges, and there are lots of
At this stage, we're ready to do our pre-shape. The pre-shape is a great opportunity to build
some additional tension into the dough and reorganize the gluten structure. Carefully
transfer the dough without de-gassing it onto a clean, dry countertop. We're going to use that
tension from the countertop to help build the tension. Use a bench knife to gently shape the
dough, pulling it gently towards you on the countertop to create some surface tension.
The dough should feel aerated and almost bouncy. The key is to do this step quickly and as gently
as possible. After this step, we'll rest the dough uncovered for 20 minutes. We're ready to do our
final shaping. At this point, you should have a well-dusted banneton set aside, ready to go.
Lightly flour the surface of your dough with bread flour. Use your bench knife to gently lift it and
flip it flour side down onto your countertop. For this video, I'm showing you how I shape my loaf
into a bรฉtard. However, you can also shape it into a round. Dust your hands lightly with flour.
Gently grab the left portion of the dough and fold it past the center.
You can gently press the edges to seal slightly. Repeat from the other side.
Using both hands, grab the dough, be extremely gentle to avoid compressing it,
and roll it up. The dough should feel extremely bouncy and well aerated.
Use your bench scraper to quickly lift it, which will help seal the edges. Transfer your dough to
your floured banneton. You can use your fingertips to gently seal off the edges of the dough. Just be
careful not to compress too much air. The dough will relax in the banneton, so don't be too worried
if you see some fold lines. Lightly dust the surface of the dough with some rice flour and
drape a linen over the basket. Cover the banneton with a plastic bag. I like to use a produce bag
and seal with a clip. Allow the dough to rest at room temperature for 10 minutes. Place the covered
banneton in the refrigerator and retard the dough for 15 to 16 hours. This slow and cold fermentation
helps develop additional flavor in the dough and improves the final crust. Preheat your challenger
pan, dutch oven, or combo cooker with the lid in a 500 degree oven for at least one hour before
baking. Once they've preheated, remove the banneton from the refrigerator and uncover.
We'll do a quick poke test for proper proofing. Lightly flour one small section of the dough.
Press your finger gently into the dough about a half inch. A properly proofed dough should very
slowly spring back and still leave a light indentation. That is a sign of a well-proofed
dough that is ready to be baked. If it springs back quickly and completely, it is under proofed
and you should return it to the fridge covered for an additional hour or so.
The dough compresses and doesn't spring back at all. It is over-proofed. There's not much you
can do at that stage, so you should just try to put it into the oven as soon as possible.
At this stage, we're ready to remove the dough from the banneton and transfer it to our preheated
baking vessel. If you're using a challenger breadware pan as shown in this video or combo
cooker, you can skip the parchment and carefully invert the dough directly into the preheated
baking vessel. I like to use my hands to lightly brush off any excess rice flour before scoring
the dough. Grab your bread lom. If you don't have a bread lom, any simple razor blade will work,
but it's nice to have that handle for some control. Starting at the very top edge and
holding the lom at a 45 degree angle, score the dough from top to bottom. I score slightly off
center in a curved shape as this has produced better ears in my bakes. The score should be
inch to three-quarters inch deep. Feel free to add a decorative leaf element on the side
of the loaf if you want. Top with your preheated lid and transfer to the oven.
We'll be baking at 500 degrees fahrenheit, covered, for the first 25 minutes of baking.
Open the oven and remove the lid. The dough should have risen and expanded considerably and
the crust should be set but only lightly golden in color. Place back in the oven. Reduce the
temperature to 475 degrees and continue to bake uncovered for an additional 15 to 25 minutes or
until the crust is deep golden and caramelized. During this final stage of baking I like to rotate
the pan several times to ensure that the crust is evenly getting color. As you can see the ear rose
extremely nicely in this bake and it's a nice even golden color. If you knock the bottom of the loaf
it will sound a little bit hollow and should feel very light. Transfer to a rack to cool completely
before slicing. This will take several hours. Slicing into warm bread will result in a gummier
texture and cause the bread to stale faster. As you can see our ear developed really nicely and
we have a really nice open crumb structure. If you enjoyed this recipe video be sure to
leave a thumbs up and subscribe to my channel. Thanks for watching!
