Dead simple THIN STRIP JIG for the TABLE SAW | Precise and repeatable
Learn how to make thin strips of wood easily with this simple DIY thin strip jig for the table saw. With this jig, you can cut thin wood strips easily over and over again, and always be sure the wooden strips have the same size. If you are looking for a jig that can make precise thin strips fast, you should make this thin rip jig for your workshop.
Visit my website https://www.christofix.com/ for free plans & blogs with valuable information.
==============================================================================
VISIT MY WEBSITE
📖 200+ woodworking-related articles & FREE PLANS: https://www.christofix.com/
BECOME A CHRISTOFIX MEMBER
💳 Get access to special membership benefits: https://www.youtube.com/c/ChristofixDIYProjects/join
Check out my current members + links here: https://www.christofix.com/become-a-member/
BUY FROM CHRISTOFIX
🏺 My Etsy shop: https://christofix.etsy.com
SUPPORT ME
💰 Donate on PayPal: https://www.paypal.me/Christofix
Your donation will be used to continue creating informative videos and blog posts. Thank you for your support!
==============================================================================
____*TIMESTAMPS*____
00:00 Thin strips made with this jig
00:12 Making the thin strip jig for the table saw
02:58 Demonstration how to cut thin strips
____*MUSIC IN THIS VIDEO*____
🎼 Music from Epidemic Sound 🎼.
Get the best music for your videos here: https://www.epidemicsound.com/referral/0eg20l/
____*MY PLAYLISTS*____
🎬 Building my workshop — https://www.youtube.com/playlist?list=PLskVFGuWsKNu22JgsWXp8SVH_v-lPL8dg
👁👁 Be sure to check out all my other videos and playlists!👁👁
____*PERSONAL PROTECTION EQUIPMENT*____
⛑ Ear protection — https://amzn.to/2E78K1T
⛑ Dust mask for woodworkers — https://amzn.to/3y5Zg0t
⛑ Work gloves — https://amzn.to/2YC4MYu
⛑ Safety glasses — https://amzn.to/2E40Ea7
⛑ Safety Boots — https://amzn.to/36qkCZ4
⛑ Blaklader work pant — https://amzn.to/2t58T3C
⛑ Blaklader Foam knee pads gray — https://amzn.to/36nQDAU
____*MATERIALS USED IN THIS VIDEO*____
⚙ Birch plywood 18 mm
⚙ MDF 6 mm
⚙ Wood glue — https://amzn.to/35qtpJU
⚙ Sanding paper 120 grit roll — https://amzn.to/35MKRZ3
____*TOOLS USED IN THIS VIDEO*____
🔧 Pica marking pencil — https://amzn.to/32q9vy
🔧 Makita MLT100 table saw — https://amzn.to/2Dzw0Fz
Unboxing video — https://youtu.be/iIvp39Z5Ayk
Review video — https://youtu.be/xKs4Mimvbqc
🔧 Makita 3709 router — https://amzn.to/2RWPnPG
🔧 Kreg KMA2900 Multi mark and measuring tool — https://amzn.to/2P1n0yc
🔧 Makita AF505N Brad nailer — https://amzn.to/2ORVhQf
Unboxing video — https://youtu.be/E-fEhvlq2Es
🔧 Air compressor — https://amzn.to/2OEtR1B
____*MY JIGS I USED IN THIS VIDEO*____
🔨 Table saw fence — https://youtu.be/Wizh4IDuiMc
🔨 Universal push stick — https://youtu.be/RqsXdg9Db5s
🔨 Crosscut sled — https://youtu.be/OCRI7hMpAUg
🔨 Zero clearance insert for my table saw — https://youtu.be/8RvlmQMs12k
____*RECOMMENDATIONS*____
📖 Want to see how I learned to shoot my videos? http://bit.ly/shootvideoswithanycamera
📖 How I saved hundreds and was able to invest in more tools with the same budget: http://bit.ly/mysmallshop
📖 Read my full story about how I started here: https://www.christofix.com/about-me/
____*CONTACT*____
🔗 E-mail - [email protected]
Feel free to email me about sponsorship, advertising, or endorsements.
THANK YOU FOR WATCHING!
#Christofix #Woodworking #thinstrips
Disclaimer: Links included in this description might be affiliate links. By using them, I earn a small fee for your purchase, but it doesn’t cost you any extra. Like that, you support me to keep creating free content. Thank you in advance!