Robby Layton Would Be Proud | Building a 1st Gen Cummins Crew Cab | Part 9

All About Auto
20 followers
Decent Garage Socials
Instagram ➔ @decent_garage
Tiktok ➔ @decent_garage
Facebook ➔ https://www.facebook.com/timstevenson1
YouTube ➔ https://www.youtube.com/c/decentgarage
Merch ➔ https://www.decentgarage.com
Email ➔ [email protected]
Address ➔ PO Box 154, Payson UT, 84651
The Hungry Diesel: Use promo code "decent_1st_gen" for 10% off your entire order.
Hotshots Secret Fluids: Use promo code "decentgarage" for 10% off your entire order.
Yes Welders: Use promo code “decentgarage” for 10% off your entire order
Toolbox Widget: Use promo code “decentgarage” for 10% off your entire order
#1stgencummins #cummins #DecentGarage
Welcome back to the channel.
We have a bunch of work to get done on long bed Larry today,
so let's get started.
We're getting the underside of the cab pressure washed
so we can get it primed and painted.
There's just, you know, grease and gunk under there.
So I pressure washed it,
now I'm gonna put some dollar store oven cleaner on it
to get the rest of it, but it's making good progress.
All right, so we got it all coated in this oven cleaner.
We're gonna let it sit for a minute, kind of bake it off,
and then we're gonna see how clean we can get it.
All right, guys, we got the whole underside wire wheeled,
got it primed where we need it primed.
I got the inside of the cab, the roof of the cab,
sanded and primed as well.
So we are ready to start painting the underside of this.
Now, what I'm gonna use is just this
Rust-Oleum protective enamel paint.
It's a gloss black.
I use this on my Jeep chassis,
the CJ5 Lieutenant Dan, if you've been around for a while,
and it works excellent.
As long as you don't have rust that you're painting over,
this stuff works great,
and we don't have any rust we're dealing with here,
so this is gonna work perfect
to paint the underside of the cab and the bed.
All right, guys, we got the whole underside painted.
I'm just doing a little touch-up here and there,
but like I said, if you're not dealing with rust
and you got a clean panel to work with,
especially for the underside
where it's not gonna be seen, this is great stuff.
It looks good and it protects really well as well.
I wouldn't use it for the outside.
We're not gonna paint the whole truck in this,
but for the underside, this stuff works really well.
All right, guys, we got a ton of work done today
on Long Bed Larry.
Thanks to my brother for helping out,
but I gotta go spend some time with my wife and kids.
It's my daughter's first 4-H event tonight.
I've never been to one, so I'm excited for that.
I'm gonna go spend some time with them,
and we'll catch back up in the morning.
Here she comes, Olive.
Go, Liv.
Lily.
So this is my first time at a 4-H event like this,
my daughter's first show,
and the one thing I noticed is a first-gen
would look amazing out in the parking lot
with all the horse trailers.
Maybe one day I'm gonna have to build her one
to pull a horse trailer with.
What do you guys think?
Comment below.
Go, go, go, go, go!
All right, it's another day here.
We are gonna finish getting the inside of this cab ready
and get it primed.
So you can see I have the sunshade out.
It is September,
and it's supposed to be over 100 degrees today,
so we're gonna need that,
but the cab is coming along.
I've wire wheeled everything.
I need to do some sanding on the back of the cab,
get that primed,
but basically all this primer I already have here,
I basically just put that down
so we didn't get any flash rusting on the bare metal,
but I plan on sanding everything
and then priming everything with my HLVP paint gun
with some primer.
So we're gonna re-sand everything
and get this thing primed today.
So let's get to it.
Whew, it's hot out here.
So anyways, we're making progress,
but I'm gonna take a quick break.
A few videos ago,
you guys saw me pick up this rear seat
that I planned to put on the OG crew cab,
but it's a little narrower than I wanted.
So I don't know if I'm gonna do it or not,
but for now this seat is super comfortable just like it is.
So this is kind of my resting spot.
When I need to kind of catch my breath
or get out of the heat a little bit.
Well, I couldn't sit down and rest for too long,
so I got up and I cleaned off most of the workbench.
I got all my spray paint organized under here,
cleaned off under the sink,
fixed something that was broken down there.
So now it's still a little bit of a mess down here,
but that's okay, we'll get to that.
So now let's get back to working on the cab.
All right, we got the rear side of the cab
and the floor and the firewall all ready to go.
So let's get this stuff primed.
It's gonna look really good once it's all in primer.
Before we start laying down some primer,
we have a couple of things we need to do.
We need to wax, degrease, and blow tack and stat it.
Remember, blow tack and stat it.
All right, we got a ton of work done in this video.
We got the bottom of the cab all cleaned,
ground down, painted, all good to go.
We got the inside of the cab sanded and primed,
all ready to go.
So in the next Long Bed Larry video,
we're gonna be sanding and prepping
the outside of the cab for paint.
We're also gonna be rebuilding the NV4500,
a complete rebuild.
Thanks for the support.
We'll see you guys in the next one.
♪ Rock music ♪
