There are a whole mess of budget moutain bike forks out there. Well I've had my hands on several inexpensive forks from ZTZ, and I've had some major failures. Well in this video, I do a full, comprehensize dissassembly to see exactly what's inside of these cheap Chinese forks. Are they even safe to ride?
Shout out to @WOLFTICK VIDEOS for the collaboration! They are EXPERTS with cheap forks and have tested 30+ forks (where do they keep them all?). Be sure to check them out.
In my last video, when I was riding this brand new ZTZ fork, I heard a major knocking sound
at the end of the ride and it sounded like something was loose inside of the lower part
of the fork. So in today's video, I'm going to be ripping apart this fork and seeing what's
wrong with it. But before we do that, I know the guys at Wolf Tick picked up a ZTZ Ultimate fork
of their own and I need to let them know about the problems. Yeah? Hey John, it's Evan. Hey man,
I gotta warn you about that ZTZ fork. We're about to score it right now. Well dude, my ZTZ fork has
something majorly wrong with it. Really? Yeah man, there's something like loose in the lowers
or something. I'm actually going to rip apart the fork right now and do a full diagnosis to
see what's wrong. Yeah, we had a few problems. We'll let everybody know that you're going to be
tearing that apart. That's your department, not ours. We ride it like it is and we score it,
you know? Well dang man, that's crazy that you had problems too. Alright, I definitely have to
let everybody know about this fork. Alright man. Alright, well good luck with that. Alright man,
see ya. Later. Alright, let's see if we can recreate this knocking sound that I heard.
And I've rigged up a GoPro to the fork leg and I'm just going to compress the fork a few times
to see if I can find it. Alright, just going to review the GoPro footage and...
That is way worse than I expected. The damper shaft is punching through the lower leg. That
means the damper shaft isn't even screwed into the lower. I just thought something was loose but
this could be a fatal error. Let's rip this fork apart right now. So this is what we're looking at
on the GoPro and this is the rebound knob. But this is attached to the damper shaft and with it
punching through the lowers like that, that's a big deal because it's not even screwed into the
lower and this little nut right here is the only thing holding that damper onto the lower.
Now full disclaimer, I did take apart the lowers and I added oil because this fork was bone dry.
There was no oils in the lower and the fork did not feel smooth at all. And you can especially
hear that on Wolftik's video. They just don't sound good. So this is the damper shaft right here
and it does not screw into the lower. Something like this should not be able to be pressed in
freely and you can hear the threads right here drag against the threads on the lower.
So that means the only thing holding together the top of the fork to the bottom of the fork
is this thin little nut right here. And this is really thin aluminum. I could definitely see this
breaking on any kind of downhill. Now every fork is different but usually there's a crush washer
right here and that crush washer seals the damper shaft to the lower fork and makes it so there's
no oil leaking out. Now I added oil but with the fork damper punching through like it did,
there's oil everywhere. It's leaking. So the lower can't even hold oil and it will definitely
wear down way faster than all the others. So this side is the air shaft and there's
one little allen bolt here. So this is the nut for the damper and this is the bolt for the air
shaft and these are the only two things holding in the entire lower part of the fork. And just
to clarify, the lower part of the fork is what holds on your front wheel. So this thing could
easily break off and then you have this tiny little bolt holding it in. Now I know exactly
why this fork says, warning do not use for downhill or free ride. Let's see if there's
any o-rings on this fork at all. Well that was not on there very tight. With it being on there that
loose how can I trust that this would hold air? Well there's the air spring. I see some grease
on there. What I don't see is any o-rings right there to seal off the air chamber. Just these
threads will not create a very good seal. So that means the fork could potentially be leaking air
over time. Well this air spring looks about the same. A lot less grease here but also no o-ring.
So this other fork is the same thing. Might not even hold air that well.
Oh I see an o-ring. It's a miracle. Oh wow this is not on tight at all. This ZTZ Ultimate air cap
also has an o-ring but man that was so loose on the fork. Next up let's take apart the damper body.
Oh that's not very tight. And I think it's safe to say that I'm not going to be putting
these forks back together. So I'm just going to start throwing stuff in the trash.
So these are both forks completely disassembled. So a damper body in a somewhat decent fork
is in a fluid bath but these are some sort of damper cartridges that are just kind of
all one piece and they are non-serviceable. You cannot service these. And also if you're
talking about servicing these air springs well they don't have an o-ring so what's there to
service on those too? I mean maybe you could grease them up. I guess you could service this
air cap and put a new o-ring on that but it ties these two pieces in together and I mean
what's the point? If this has an o-ring and this doesn't well then there's no point. And one more
thing I want to check out the seals and the dust wipers to see what they look like. So let's pull
these apart. I found the best way to remove these dust wipers is with a big old huge wrench.
Oh no. So these dust wipers are not that impressive either and they're not that thick
and normally there would be a foam o-ring right in here to help prevent dust and dirt
from mixing with the fork oil and the fork oil is necessary to keep everything moving
you know up and down real smooth. Instead of the foam underneath this there's this weird
plastic thing. What is this? I've never seen this before and like what does that even do?
This might have actually been sliding up and down on the on the stanchion and if that happens then
you know it's gonna scratch and probably even start leaking air, leaking oil. So everything
about this build is just strange. Well I really wanted these forks to work because the guys at
ZTZ have great customer service and they're pretty receptive. But if your customer service is a 5
out of 5 but your product is a 0 out of 5 well you can't really polish a turd. And if they were
smart they'd use this video to produce a better fork and I'm no stranger to ZTZ forks failing on
Earlier in the year I had a pair of their forks leak oil everywhere right after installation and
I reached out to ZTZ and they said that they had fixed the issue and sent me this updated fork. So
I guess by fixing the issue they just removed all the fork oil. A fork can't leak if it doesn't have
oil. Well after noticing the major problem with the ZTZ ultimate fork I reached out to them to
let them know about their fatal flaw and I told them that their fork needs to be seriously checked
And they responded to me by saying
Well this is pretty much the end of a chapter for me. I'm not really interested in using Chinese
forks anymore. If ZTZ does produce a really good fork and wants me to test it out, hey I'll ride
it. The lesson here is that you get what you pay for. Exposing the poor production of this fork
might hurt me for potential sponsorships but my word and trust with the Saga Squad is everything
to me. ZTZ never paid me or told me what to say but they did send me free parts and I did have
affiliate links to their forks so that basically makes me a salesman of their parts in a way.
And if I betrayed the audience by pushing junk, well then how can I be trusted? That's why this
video was completely necessary to warn everyone and I really hope no one gets hurt from these
forks. So if you appreciate my honesty by calling it how it is, let me know by hitting that subscribe
button. Now I'm left wondering how I can get this Trek ready to be sold. Luckily I have great
supporters out there like Tyler who bought me five cups of coffee and that's gonna definitely
help get this Trek ready to be sold. Thanks for watching, I'll see you in the next one.