I am loving this Polygon Ciscu D7, and I've been riding it non-stop on some very proper trails,
and it's been fantastic. I do want to do something special for this build. That's why I picked up
this all-new 2022 Fox 34 Stepcast with 120 millimeters travel, which is arguably the
best fork on the market for a downcountry bike. And I bought this fork as an anniversary gift
for the channel for a whopping price of $1,100. So let's get started.
I want to give a big thank you to all the people who have purchased a Polygon with my link since
the last video. If you are one of the first ones, email me and I'll send you a care package. And if
you want to pick up a Polygon for yourself, please use my affiliate link in the description. It's a
huge help for the channel. This Recon weighs four and a half pounds, and the Fox 34 Stepcast weighs
3.3 pounds. That's a nice weight loss. The only problem is that the steer tube is comically long,
so we're gonna have to take a saw to this beautiful $1,100 fork. I'm not gonna lie,
I'm pretty nervous. I really don't want to mess this up. To cut a steer tube down,
you can either use a pipe cutter like this one, but the one I have is pretty low quality and it
mushroomed out the metal, so I have to do a lot of filing. So to do it the correct way,
I picked up this Park Tool saw guide, but this one is made specifically for carbon blades.
So I'm gonna head to the store and get some washers that are the same width as the saw blade,
and then I'll have a saw guide that can cut both metal and carbon. We're ready to cut this thing.
Here's the hacksaw. Let's cut up this Fox 34. Ah, it worked. I was getting pretty nervous there
for a second, but now I'm gonna round over the edges with my file here and then install the
star nut. Normally I'd install a star nut by holding the fork in my hand, but it's really
hard to capture on camera because it's almost impossible to hold the fork still. Pounding in
the star nut in this saw guide is not recommended, and it can scuff up the fork. Oh no, this is all
bad. This front wheel does not fit on this fork. How could I forget that this is a non-boost 100
millimeter wide front hub? I mentioned it in the last video. I could use the front wheel from the
nucleus, but then the wheels wouldn't be matching, and it just wouldn't feel right. I gotta figure
out the cure. Boost center lock conversion. Well, it looks like I found one on one of my favorite
online bike shops called Universal Cycles, and it's only for like $25. I'm ordering that. This
is a Problem Solvers boost conversion kit, and it converts a 100 millimeter center lock hub to
boost spacing 110 millimeters, and that's way easier than spoking a new hub or buying a new
front wheel. Now that the fork and hub dilemma are behind us, I can't bring myself to install
the stock MT-201 brakes on a $1,000 fork. The MT-201s are great entry-level hydraulic brakes,
and you can sometimes find them for a good price, but I have some really nice brakes that came off
Mythic, so let's get them installed. This front caliber is a Shimano Deore XT 4-piston, and I
think a 4-piston is very downcountry-like. A downcountry bike is a beefed up XC bike that is
better at descending, so it'd make more sense to have more stopping power with a 4-piston in the
front. So the plan was to change out the rear brakes and deal with the internal cable routing,
but a new brake rotor didn't come in time, and the stock rotors are for resin pads only. So for now,
I'm gonna be running mismatched brakes. But the bike is way lighter now. The stock weight was 34.6
pounds, and it now weighs 31.2 pounds. So we've already lost almost three and a half pounds off
this bike, and the fork only shaved 1.2 pounds off, but the biggest weight saver was going tubeless
and light pedals, which shaved over two pounds. Before the upgrades, I took the stock D7 on the
Saga test loop, and I got a crazy time of 7 minutes 59 seconds, which was a whole minute faster than
the upgraded Mythic, which was kind of shocking to see. But it's because of this geometry, and I
think the longer cranks helped at 175 millimeters. But did we solve all the issues that I had with
this bike? And is this bike faster now? Let's find out. I want to give a shout out to all my coffee
supporters. Brian J bought me 40 cups of coffee. Thanks so much Brian, that is huge! Also my friend
Mr. Dentist bought me five cups of coffee, and Wilmer bought me a coffee too. You guys rock,
and you really help fund these videos. And finish!