Building a Custom Jeep CJ on 43" Tires

Join my life
24 followers
3 Video Views·Oct 23, 2022
Chris Payne. Say hello. Hi. I'm letting him use the plasma cutter for once.
I get to play with this toy. All right, ready? Here we go. See what you got.
Under pressure. How did I do coach? I'll give you a A-. All right. Because you didn't put your
welding jack on. What's up Fly Bright Nation? So we're back from Smoky Mountain. We had a great
trip. It was awesome meeting all of you guys and getting to do a lot of cool stuff while we were
there. It was really fun for me to go back to the East Coast because I did miss home and it was nice
to see my family that stopped by the event and meeting all of you guys. It's crazy. Yeah, we had
a great time. Yes, it was so much fun. But all good things must come to an end. So we're ending
that but now we're back to good things. We're starting other good things. So now we're home
and we have a little bit of work to do with Trail Hero coming up. We have that thing and that thing
and we'll dive into these right now and tell you all about them. So both of these builds belong
to the same person and he happens to be a really good friend of ours. This Jeep has been on the
channel before. CJ. It's on 43s. It was black when it was previously on Fly Bright Nation.
Now it is orange. It is John's favorite color. John had the whole tub bullet lined and the outside
is also lined too. And he basically just wanted Chris and I to put it back together after it was
painted. So we're gonna do that and we're also gonna do a couple other little things that we
will get to in the video. And then we have what is known as the pebble bouncer. Yeah, we were just
supposed to fix the axles up a little bit and we got into it. Opened up the front axle and the
gears were in pretty rough shape. Like the teeth were chipped and then we opened up the rear and
it was full of mud and we were just like, you know what? Let's just find some different ones.
So Chris did his research and we picked these up really close by. Got a really good deal on them.
The plan is to completely clean these up. Put a truss on them and make them look beautiful.
Throw them under the pebble bouncer. So one of the things John wanted to do is he wants to
simplify this dash. All the old switches and the light switches and all the old stuff. We're gonna
get rid of all that. Because I hate wiring, but I'm really good at it, we're gonna do a switch pro.
So we're gonna turn all of these switches into one switch pro. So we're gonna clean up the dash.
We're gonna move some things around. I'm gonna put some some of the gauges back in the middle.
We're just gonna make this a lot cleaner and easier to use. So that's one of the things
we're gonna get doing and clean up all the wiring in here. While Chris is working on the CJ,
I'm going to be tackling the pebble bouncer. Before he had quarter ton axles and those axles
came with all these spacers and it was one of the reasons he brought it to us because we never want
to see those again. Good news is we did get the one tons and they are eight lug and what I'm going
to do next is cut all of these brackets off and completely clean it up and get it ready for the
Barnes four-wheel drive truss kit. So while we knock up this dash, I'm going to cut it out of
aluminum. So we're going to lose this dash. We're going to take the ARBs and put it in the switch
pros. The lights put it in a switch pro. I don't know what these are for. I'm pretty sure these
are the bumper lights which will be in a switch probe. All of the heat and AC controls which we
will upgrade that also. We will be putting an AC system in here. I'm not sure which one yet. I'm
still trying to figure out which one will fit. So I'm still doing a little bit of research but
anyway that'll fit inside the dash. I'm not really worried about that part. The radio, we need to put
a radio in there. We're going to move all three of these gauges and put them next to each other like
they're supposed to be so that you can see everything all together. So the first thing we're
going to do is we're going to get this dash out and disconnected and see how bad the wiring is back
there. So I'm tearing this dash apart. Nightmare. So we're tracking some stuff down. I do know that
all of the ARB stuff which is now down here, all of that will come out because that's all going to
go to the switch pros now. So that's cool. I have a black wire that I think is a positive wire.
So that's that's cool. We're going to yank that out. We're finding some more stuff. So we're just
going to yank all this stuff out. On the passenger side where all the battery stuff is, all of this
is going to go. So we're going to try and decipher where all of it came from. I do know and then this
little guy there's like this floating relay. It says fan but let's find out. So we're going to
rewire the fan, rewire all of the ARB stuff, get rid of all the relays and all this stuff because
you know switch pros can handle all that by itself. So now I'm going to take all this wiring out.
All right as you can see we got it out. I took the old heater box out because we're not going to use
that. So now I just have to decipher all of that mess and clean it up because there's a lot of
stuff in there we don't need. Like I'm going to redo these speaker lines. So half of this will be gone.
This is the old resistor for the fan. The fan resistor thingy majigger. So all that wiring is
gone. Don't need any of that. All the lights and stuff for the old gauges. This can all go because
I'm not going to use that. I think I'm going to convert this to an electric or electronic oil
temp sensor or oil pressure sensor. That we got to clean up. They kind of over sprayed onto that
guy. Some of this is going to go away and now I just got to go through there and just figure out
what everything is. Also we got all of the relays off of the firewall in here. This is the only
table that needs to run across here. I just need to loom this up and clean all this up.
I got rid of that big cable that came across here because all the ARB stuff is now out of here
because it'll go straight into the switch pros. We're gonna shorten all this stuff up. These are
for, I don't know, the O2 sensors or something because this is injected. Re-loom it. Clean up
the top of this engine bay. Redo some of these. I got to redo the fan because the fan, that's what
one relay was, and it was burned so they were having to jump the fan. So I'll have to put a
real fan in there and that is also controlled by that guy right there. So I'll have to get a new
relay and stuff wired into that and get that fan running. This is going to go to the new AC box
that'll be in the firewall when we get it. But for now they just ran it like this because I don't
know why but hey it works. I was trying to take these nuts off and as you can see all of them
are pretty mushroomed like someone took a hammer to them and like when this one was coming off it
was completely taking off the metal and this one I can't even get off right now. So what I'm going
to do is take the finger grinder and just like clean up the edges and hope that it'll come right
off afterwards. After I was done going through that wiring we took everything off of here that
was important and I'm starting to transfer it out into a layout of the new dash. I had to move
some stuff over because stuff didn't fit in some spots so but this is what we're gonna pretty much
end up with. We're gonna put a speaker over here. Glove box will be gone. We really don't want the
glove box in here anymore. There'll be a speaker here. I still gotta put turn signal LEDs in here.
This is the original cluster. Maybe. I don't know if we're gonna get rid of that because now we
don't need all the gauges that were in it. I don't know. I don't know yet. The arc, the tack,
temp, bolts, oil, and surprisingly enough I got the original quartz clock actually works.
Believe it or not it works. I don't know how accurate it's going to be over time but it does
work. I'm going to stick that back in the dash because that's pretty rad. So I did take the
grill off because it is going to be painted in the same bullet liner color. And today we're just
gonna start sticking on what we do have. I think we have a window frame, a tailgate, we have the
rock protector, the rocker protectors slash rock sliders, and the rear bumper. So that's what we're
gonna try to get on today. Before we put the tailgate on we did want to touch up some of
these miscellaneous brackets and make them look a little bit better. And John didn't want these
to be silver anymore so we're going black. Beck is a professional painter. She's really good at it
and I like it. What's funny is like growing up my dad always had a joke
that if we ever needed a job living out in the country
of the horse farms so we could just paint the fences.
Worse came the worse. John also wanted to polish this tank up so I'm going to clean this tank real
quick. Clean the overspray and the dirt and the years of grime and stuff on it and probably hit
it with the buffer real quick and see what happens. I don't want to make it too shiny.
We'll just see what happens. There's a lot of like grit a lot of a lot of grit and dirt and grime on
this from over the years so I'm just gonna scotch brite it hit it with some acetone and see if we can
get this thing to polish up a little bit. So Beck and I got pretty far on the CJ. Now we're gonna
shift gears because we're waiting on some parts for the CJ. We're gonna shift gears back onto the
bouncer. So we got a little bit of work to do on the bouncer so that's what we're gonna do now.
Now we're replacing ball joints. Last night I got these parts sandblasted and today I'm going to
primer them and paint them. And while Beck gets those parts all painted up I'm gonna strip this
firewall back so that we can paint this firewall because let's be honest it looks pretty bad.
So here's the new dash layout of the CJ or for the CJ. So I got them new speakers. These are
marine piles. I mean I know they're not like super high-end but they are waterproof so that we can
put these in the dash without having to worry about having the top on them. They can get wet
and they've got a nice screen on them. That's all I really wanted. We're gonna put four gauges across
here not three so these will actually be four across here because I needed a fuel gauge so
there'll be a fuel gauge here. Speedometer which just came in. It's an auto meter so we'll put a
speedometer here. I have a new RPM gauge coming. It's the same series as this so it'll match.
Actually all these gauges will all match. They're all the Z series from auto meter.
Kevin's making noise. I got these two. We got a USB. It's a 3.0 USB so it'll be a quick charge.
So I have that and then I have a regular input auxiliary power for whatever else he wants to run.
Steering column and then one more speaker will go right here and then we'll cut this whole thing out
and get it all bent up. Switch pros. 12 button switch pros will go somewhere in this vicinity.
And an original quartz clock out of this CJ. I'm gonna throw this nice vintage piece back in here
and make it work because I think it's sick. So I'm gonna get to plotting one more time and actually
get some lines drawn out and some circles and stuff to grab handle this vacuum grab handle in
So yeah let me get to cutting. Back to getting everything prepped for paint. A couple of things
we're going to paint orange. We're going to paint the center armrest console thingy and he does want
these ORIs painted orange so we are going to take these off scuff these up and paint them orange.
Beadlock rings will be orange. The cage that holds the tank down will be orange. Touch up the links
and then black seats orange belts then the orange cage that'll be on it. So that'll be pretty sweet
and then the dash will be black with all new layout and then a bunch of black hardware.
This thing should be pretty sweet. All right so we got everything laid out. We're gonna have
the speaker right here. I need a five and an eighth hole centered from here. I need to cut
this guy out. The steering wheel trim will fit around it. The steering column trim. I have two
gauges. RPM and speed. Those are both three and five sixteenths hole saws. Beck actually just ran
up to the hardware store to get me this hole saw because I don't have one. I do have these. These
are inch and an eighth. These are for the two USB and auxiliary power and then four of the same gauges
two and a sixteenth for fuel, volt, oil pressure, water temp or probably not in that order but you
get it. So that guy goes right there. This is for the switch pros. So this guy will go right here
almost dead center. So this is the center of the dash and it's as close as I can get it to center.
So we're gonna go right there. This will be the radio. The other speaker will probably put some
sort of pocket here but I won't put it in the dash. I don't think I'm gonna put an actual glove
box back in it. I think what I might do is do like a molly pack or something like that so I might
cut something to go here so you can hang molly pack on here but this is gonna be the one speaker
and I haven't quite figured out exactly where I want this to go. It's probably gonna go up here
somewhere the grab handle and that's it and then in the future I don't know what we're gonna put
here. I was gonna put AC here but we are gonna go with an under dash unit and not an in dash unit
because I don't quite have the space if the gauges and everything are in here to run a behind the
dash full AC unit. So I'm gonna run an under dash and we have a lot of room under the dash so that's
what we're gonna probably run with. I think it'll look great and everything's black because he wanted
a black face and black rings so I had to order all new gauges and this is what we came up with.
We do want to do something with this. He doesn't like the chrome. I don't know maybe we'll powder
coat it or something but he doesn't like the chrome but that's the only piece of chrome on
the inside but for now we're just gonna get this cut. So I know I've said it before but wax
will help cut aluminum. Is he talking to you? Come here pecker.
Come here buddy. He's got two over there.
So we got all the holes cut out. There's actually holes under here right there
and they fit. So this is the top side. This is the face. This is the face of the dash
but now it is time to wire all this up because I'm going to do something a little different on
this dash. So instead of everything having a plug and then having to plug it into the dash on that
what we're going to do to this one is we're going to run all these accessories
so a left and a right speaker all the power and grounds for all the lights
all the powers to power everything except for the radio because it has its own plug but these the
usbs and everything the speedometer the rpm gauge the tack wire and everything that comes out of
that and the speaker wires because they're physically attached to this dash we are going
to run a harness i'm going to create a harness that's going to pick up all of these including
turn signals there'll be a left and a right turn signal and a center like warning light this right
here we'll plug into that but this plug will be part of the dash so this will come out of the dash
here it'll come out of here and then plug into the jeep so this will be one plug there'll be a
second plug that'll have the speaker wires and everything else that's going to be an accessory
on this dash so you can install this dash and then just plug it in the reason i'm doing that
is because we all know how hard it is to pull a dash if you saw me pull this dash i had to
get under there and unplug every individual thing because it was tied to the jeep which
makes removing the dash really hard and i want to try to keep it really clean under the dash
so the dash will have its own harness over to the driver's side and then just plug in
and then i can run all of the harness under the driver's side and against the firewall
so there'll be no wires under there because i don't like that except for the radio the radio
will have its own power and everything but it sticks far enough in there and you can just
simply reach under there and unplug it easy so let's get started all right so as you can see i
have a couple of circuits already ran i have a loom and all the grounds ran i have a tack because
it was already in there but what i did is i am going to i am going to incorporate the radio
into this harness because i already have power i already have grounds i already have ignition
and then the front two speakers the only thing that will not be in this is the two rear speakers
which i figure would be easier to put a connector here to run all the way over here for the two rear
speakers so that's what we're gonna do that way we don't have to worry about anything in this dash
we'll just have one connector over here that'll have all the extra stuff on it i'm not sure what
it is yet i know it's a left and a right rear i don't know what else will be in here yet but uh
this is how it is coming along sweet so guess what just showed up all the rest of the gauges
so now i can finish beautifying this section right here because there's a lot of mess in here that's
what we're doing i got the switch pros plugged in and cut so i'm going to put another connector
here so that it's with this one so i got to run two sets of speaker wires left and right rear
to a plug over here and then run these three sensors back up which is oil pressure water
temperature and fuel so fuel level but i needed to know how they connect so let's get these things
opening in so i took john's b block rings off and now i'm going to sandblast them and get them
ready for paint there's a snake in my boob all right guys i know i know more wiring but we're
almost done we got three more things to do all right so before i forget to do this again because
i forgot to do it once uh the first time we are mixing up some paint so i got my gun here
and no it's not a harbor freight gun it's actually a really good gun
it's a pen and farina so it's a nice iwata gun gravity feed i may or may not have already done
some stuff which you will see right now and now i'm gonna go for round two because i don't have
enough room back here made this cool little paint booth out of the back of the shop it actually works
very very well we didn't get anything on the concrete floor or anything else or the walls or
anything so i have the beadlock rings left the center console we're gonna paint the whole center
console the bottom of the fuel cell holder down our thingamajigger uh the winch plate cover the
winch the top plate for the winch yeah you'll see it when it all comes together but right now we're
gonna shoot this orange and then i gotta whip up some clear and shoot this stuff clear i'll show you
everything when it's done i don't know if you can see it but man look at look at that gold there's
some gold flake in there oh it's so pretty i mean i'm not a huge orange fan but man look at the look
at the shimmer in that whoa let's get it painted all right there she is no runs it's like i've
done this before mind you i haven't done this in about three and a half years but yeah she came out
pretty good pretty excited look at that sheen oh my god this is actually a pretty neat color
i mean i'm not gonna lie i didn't i didn't like it at first but i mean i'm not an orange fan but
geez this color is pretty sick can't wait to get it all put back together and earlier today i got
the dash 99% wired i gotta put two connectors on the ends i got all the i got some dash light or
some footwell lighting in the bottom of the dash i got the blinkers wired up just need to cut this
thing out and go get it bent put one one break right at the bottom and we'll get this thing
ready to get painted so tomorrow we're gonna paint a lot of black
shoo-wee look at that paint job chris did looks wonderful all right time to put them on
chris payne say hello hi i'm letting him use the plasma cutter for once i get to play with
this toy all right ready here we go see what you got under pressure how did i do coach
check it out let's try stop it looks good thanks coach i'll give you a a minus all right because
didn't put your welding jack on but other than that you did good i just want to give a quick
shout out to race ramps because they're pretty awesome right so you got the race ramps but look
jelly likes them and not only are race ramps awesome for getting your vehicle on and off
low trailers and stuff and you can have them custom made for different ramps and different
angles and all that stuff and different lengths we have a double set to get the
supra and stuff on the trailer which i know you've seen before but not only are they great at being
ramps they're really good at making dog pens so they double in the shop when you're not using them
you can use them to make a dog pen jelly can cheat because she can get up and over but this little one
she's just chilling she's just having a good old time we got the race ramps making a little puppy
bed so not only am i on puppy duty today beck is out doing puppy sitting for a friend of hers today
too so we're both puppy sitting but uh i still gonna finish up some wiring on the jeep today
i'm starting to get things mounted and routed even though it looks like a complete mess there's stuff
everywhere but i know where all this is starting to go and i'm just laying it all out and continuing
all the sensors and moving some stuff around those plug wires are
rerouted and cleaned up on this side not so much on the other side yet although the other side is
starting to come together i have the fuel pressure regulator mounted i'm going to change these hoses
i still got to redo the plug wires on this side and get some more stuff wired we already cut out
a bunch of stuff out of this harness as well that doesn't need to be there this is going to go down
the fender because this all goes to the front and i'm starting to get this side figured out i had to
take the clutch pedal out of here because there was a clutch pedal in here but i took that out
and all the linkages and stuff and we'll get that dash put back in so we still need a windshield so
we'll get that this week until then thanks for watching remember to like and subscribe and share
and remember you can get all your light bright studios merch and decals at lightbrightstudios.com
so beck's over here screwing around and it's because it's on jack stand still because the
i was just trying to remind him that the you know the shocks needed to go in
that's why it's on jack stands and the tire moves and she fell off it showed
