I Made The Switch To A Canopy Alu-cab Aluminum Explorer Canopy

Speedy Getaway
19 followers
11 Video Views·Oct 23, 2022
What is going on guys, George with another video and welcome back to the channel.
You can see it in my smile, you can see it in my excitement. We are here visiting our good friends
at TinyRico. Now for those of you guys that are on here because you probably read the title and
haven't been able to catch up on the last two videos. I've been working on my setup and yes,
I've been transitioning basically from your normal bed rack and a tent to what we're pretty much
installing today which is going to be an AluCab canopy and then eventually on the next episode
we're going to be doing the AluCab tent as well. So the last two episodes we were working on the
interior portion of the truck, getting the GooseGear C3 all dialed in pretty much just to maximize
the storage in the rear portion of the truck. But now to be able to come down and visit my
good friends at TinyRico and bring this whole entire vision to life, I'm absolutely excited.
So let's go inside and get this bad boy installed.
All right we're here, excited. We got the canopy right here on the floor,
boys are getting all prepped and ready to go. I'm gonna let Daniel tell you guys a little bit about
what this canopy has to offer and the options you can get when you order from them. Let's go.
So this specific solution for mounting the canopy to the truck is pretty cool. Slides into the
factory bed rails and it's pretty beefy hardware that's actually bolting into the canopy versus
clamping it to your bedside. So really like this solution for mounting to the vehicle.
All right so now they have these clamps in place. They're not clamped down yet but you can kind of
see there's a hardware slot here where a M8 nut slides into the channel and that gets,
this bracket gets a nyloc nut on there and so that's got a nice firm footing against the canopy
itself. And then you've got this guy that sits in the bed rails that gets tightened up and then
this gets clamped together. Alikab provides these shims so that you can have the correct amount of
pressure split between making the canopy seal nice on the bed sides and also making sure that
you have enough weight on the actual brackets and the bed rails because bed rails will support most
of the weight. So one thing we do on installs just like we do with suspension and everything
is we use these paint markers. This is called fiber tight but basically we index everything
so you can have just a quick visual reference that nothing's coming loose on you and then
if you see that that's split you know that something's going on you gotta tighten it back
up. So just another little detail of something we like to do on all our hardware. So here we're
hooking up the third brake light because the canopies come standard with that and it's a
legal requirement for a third brake light. And something we do that other shops may not do is
we're using these solder heat shrink connections that are really tough and solid. They're waterproof
instead of like the standard little t connectors that just crimp onto a wire. We use our vehicles
pretty hard and we know George does too so these we know will stand the test of time and not short
out or cause any issues down the road. All right guys so the boys just finished the install and
here we have not the finished product but we do have the canopy installed and boy oh boy
where you going where are you going i'm absolutely thankful for these guys check it out
sick what do you think all right so i'm gonna hop in and he's gonna take me to a spot and just a
disclaimer guys this was not a free camper it was not a free camper it was not a free camper yeah
there's no way you're ever gonna get a free camper uh but uh i did choose to go with these
guys not only is daniel a really good friend of mine but i've seen and i've been to their shop
when they are installing campers and uh i mean the footage basically speaks for itself so
it's awesome being able to support your homies that truly put in the work so thanks man yeah
you're welcome and i'm more stoked than more stoked about you having a rad setup something
i think you're really gonna enjoy than yeah simply just having you like push stuff for us
so yeah for sure i think you're gonna be stoked dude well let's go outside and see what it looks
like bam dude this thing is absolutely rad the crazy part is that it looks rad already it looks
awesome already and it's not even finished and at the same time it's not even all about the looks
just the functionality once you guys see this thing when it's completely done you guys are
gonna trip out um at this point like i was telling you guys uh in the previous videos
it's all about function functionality and uh i'm absolutely stoked check this out easy to use got
the struts sick but then again i know absolutely nothing i just got this installed we're gonna
let daniel tell us more about it okay so an alucab canopy so i think you guys probably saw
in one of george's videos the the full setup that i have that has the integrated tent in it
this is a lower profile more of a minimalist design so the reason why i'm super stoked on
is it only weighs 125 pounds so i came from a snug top on my vehicle when george did a walk
around like way long ago and that thing weighed 310 pounds right and i put a tent on top of it
and i had a prinzi rack on top of it and it just it weighs a lot so this is a super minimalist setup
and that it only weighs 125 pounds from a durability standpoint too it's built by a company
who's engineered this stuff for overlanding for expeditions and so it's built extremely well
the doors open very very high so you get a full opening to go inside it comes with a light on
the side panel on each side as well as one in the back of the canopy so that was something that i
had to have as an upgrade whereas this comes standard i know luke mentioned earlier the way
that it mounts to the bed rail system and again the way that this one mounts it's coming from a
he's just had so many years in engineering behind it that they figured out the right way to do it so
rather than having an entire canopy putting all the weight on your bedside which it's not designed
to do the vehicle is not designed to do it they distribute the weight evenly through your bed
rail system and your bed sides so really cool really functional again when you start adding
a bunch of weight on the vehicle every little pound matters the way things are mounted matters
so it's just a super functional really dialed in design so i think one of the things george
is going to enjoy the most is the fact that he's always had his stuff in his bed super exposed
right so it gets dusty gets wet and then when you go on a trip and you park like outside of a
shopping center or something like that to grab food your stuff's in your bed and people can take
it so this is super secure you've got locks on each one really solid latches one of the things
i want to show you guys is the seal on these canopies so it's a double seal so this is going
to sandwich nicely on the top of the bed and then also you've got the second bulb seal here as well
so it just seals really nice and keeps that dust out and i'll show you guys what it looks like when
you don't keep the dust out because your bed is an absolute mess george so you guys always hear
about this is how you don't bring a customer or bring a shop your vehicle george is the perfect
example of that right now a couple notes to point out about the canopy as well is it's got this
t-track all the way through the canopy so that's how it bolts to your bed but also you can
use any m8 hardware and attach hooks and things like that to mount other accessories on here
it's got it in the forward end as well by the window up front and so again you can mount more
accessories carrying carrying over to the top of the canopy so it's adding strength but also that
track allows you to mount different accessories so george has a lot of different accessories
over the years that he's used on his front runner systems and he's made an investment into that
the system in here is going to allow him to be able to mount those accessories in here
should he choose so just having a simple track up there where you can slide some m8 hardware in there
is going to allow you to put all kinds of things up there so we're going to be doing a few more
things to george's vehicle in the coming weeks we've got some stuff planned for it a couple
accessories that alleycat makes that's going to get this thing super dialed in i am excited
as you heard daniel earlier i mean he gave you guys some pretty detailed information about the
canopy and this is just going to be one of those videos that obviously there's going to be another
video after this basically doing the wiring uh installing the tent on it and i have a lot of
stuff to do we're going to be upgrading the battery we're going to be running all solar
on it as well i have a new exhaust that we just received brand new intake this is going to be a
crazy crazy series i call it a series because i'm going to be doing a lot of installs a lot of new
updates on the truck to make it as functional as functional can be on the trail and then once it's
all done you already know we're going to take a long trip before the baby comes yes we're going to
be having a baby i'm going to be a dad uh he sela is i want to say five months pregnant so that's
definitely going to be exciting as well and aside from this being a work vehicle i think now with
the baby now with the dog um it's definitely gonna be a lot more functional the dog's gonna be able
to sleep in the back the wife the baby is gonna be up top away from all the creatures just overall
a better functional family vehicle so as always i want to thank you guys so much for watching
the guys at tiny rig i want to thank you guys so much i know you guys are going to watch this video
as well i'll be putting all their information down below if you guys want to check them out
why do i always say that you guys should know that already but yes their information will be
down below their instagram all that stuff if you guys don't follow me on instagram you might want
to do that because a lot of updates are going to be posted on my story and as always i want to thank
you guys so much for watching and i'll catch you guys in the next video peace
