I Bought a $90k Range Rover for ONLY $2,000! Can we fix it-.

Drive Time
10 followers
26 Video Views·Oct 22, 2022
This is a highly desirable Range Rover with a clean title.
I managed to purchase it for only a couple thousand dollars
at an online auction, only having seen 10 photos of it.
My name is Waldo, and I've always loved the idea
of getting a killer deal on a sweet vehicle at an auction.
In this video, we're gonna find out if I succeeded
or if I ended up with a total basket case
that is gonna take more money to fix
than there is in the entire world.
There's always a bit of mystery
when purchasing a vehicle at auction,
and this one is certainly no exception.
According to the auction listing,
this vehicle is a non-runner.
Now, the holy grail of auction finds
is when you get a good deal on a vehicle
with serious issues that turns out
to have been misdiagnosed by the seller
and the fix ends up being easy and inexpensive.
As for solving this mystery,
well, the first clue can be found here in the boot
where there are a couple half-empty bottles
of engine coolant, not a good sign.
Also here in the boot, I found this business card.
I called the number on it,
and lo and behold, it was the previous owner.
The previous owner was nice enough
to give me the backstory on this from his lay perspective.
He said that this vehicle had been sitting
for a couple years because he had attempted to trade it in,
and when the dealer was doing the pre-trade-in inspection,
they discovered a knocking noise.
He never had a mechanic do a detailed investigation
to determine the cause.
He simply assumed that he wouldn't be able
to afford the repair and then parked the vehicle.
Fast forward to the present.
The previous owner said that he tried to start the vehicle,
but he wasn't able to.
He ended up deciding to sell the vehicle
to one of those companies that buys vehicles for cash
and then sends them right off to the auction house.
That's where I come in.
This story was very helpful because it tells me
that this vehicle did run when it was parked.
I assume the reason why it wouldn't start
for the previous owner is because the gas had gone bad
while it was sitting for a couple years.
As for the knocking noise,
I'll admit that a knock is generally a bad thing.
However, the issue may not be as bad as it sounds.
These five liter Jaguar V8 engines have a very common issue
where the timing chains become loose
due to a faulty design in the tensioner guides.
The noise made by that issue is generally described
as a click or a ticking sound.
I think the right course of action would be
to try to get this thing running
and then we can see what it sounds like.
But first, just look at this thing.
A Range Rover looks good on Rodeo Drive,
but it looks even better wafting down a country lane.
Then there's the interior.
Heated and cooled seats,
covered with a supple ivory leather
and trimmed with jet piping.
It really is a nice place to be.
Couple that with the capability of four wheel drive,
low range and high ground clearance,
these machines are very capable too.
The Range Rover then,
is a machine uniquely outfitted for luxury country living.
The vehicle has about half a tank of fuel
and before I can start it, I need to drain the tank.
If you peel up the carpet in the back,
you find a nifty little hatch for accessing the fuel tank.
If I pop off the cover,
you can get a good look inside the tank.
Now, I'm gonna be using a fluid extractor
to, well, extract the fuel.
It works by pumping air out of the fluid reservoir,
which creates a vacuum and thus sucks fluids
out of wherever you put the end of the hose.
I made a point to try to take the fuel
from the bottom of the tank,
just in case there was any water in there,
this would pick it up.
Now, this thing actually worked really well.
I bought this in order to do oil changes,
to extract the fluids from the top of the engine,
which is pretty cool
and that's actually what this vehicle calls for,
but it can be used for other fluids too,
like fuel or coolant or really,
whatever you wanna use it for.
I'll put a link to this in the description below.
I bought the big one,
which has a two and a half gallon capacity
so that I could do oil changes on my diesel trucks,
which take two and a half gallons of oil,
but there are smaller and cheaper ones available as well,
if you don't need such a large unit.
Oh, it's got a little drain here, which you can remove,
which helps it pour fuel out a lot faster.
That's pretty neat.
Man, this thing is designed really well.
All right, with almost 15 gallons of fuel removed,
I can now add some fresh fuel into the tank.
So when I add fresh fuel to this,
I'm gonna add some fuel injector cleaner in here,
which will hopefully work its magic
to clean up the fuel system.
And now before I start this,
there is one more thing that I wanna check
and that is the oil.
Now, unfortunately, this vehicle does not have a dipstick
and so if you wanna check the oil,
there's two ways to do it.
Number one, if you wanna check the level,
there is an oil level sensor
that you can use the computer in the dashboard
in order to measure it and tell you what the oil level is.
In this case, it does say it's a little bit underfilled.
Number two, if you wanna actually see
what the oil looks like,
there's only one way to do that
and that is to pull some of the oil out of the engine
so that you can inspect it.
That is where this thing comes in handy.
Underneath the oil fill cap
is a metal tube that sticks out
and so this little tube here should fit over that nicely.
And now if I pump this fluid evacuator,
we should start to see some oil come up.
I only wanna take a little bit out
because I basically wanna make sure
that there's no water in there
and make sure the oil looks okay.
And I mean, that is pretty dark, but it looks like oil.
So I'm gonna remove the plug from this
and I think we're just gonna call that good.
That is really dark.
Well, I'm not gonna run this for very long
before I do an oil change, that's for sure.
All right, well, let's try to give this thing a start
and see what happens.
Now, one thing to keep in mind
is that this may have to crank over quite a bit
before it starts.
The fuel system is a returnless fuel system.
So the fuel that goes from the fuel pump to the injectors,
there's no return.
It just goes one way
and it has to be used through the injectors.
All right, foot on the brake.
Oh, okay.
Well, the engine is cranking over for a little bit.
It sounds like the battery is kind of low.
So I guess I'll check the voltage on that
even though that I did just install a brand new battery.
I guess I will throw a battery charger on it
and hopefully that will help it out.
Let's see what this battery voltage is here.
And that says 10.8 volts.
That's really bad.
So I'm guessing that this vehicle
might have a battery drain issue that I need to deal with.
All right, so I grabbed a second battery,
which I have hooked up via jumper cables.
And then I also grabbed a battery charger
running at a constant 15 amps
to help keep these batteries topped off.
Oh, and another thing to note
is that I'm not hearing any weird noises
from the engine while it's cranking.
So that is a good sign,
although that doesn't necessarily mean
that there's not anything wrong.
Okay, so I got it running
and I'm not sure if I hit record.
So let's start this thing up again
and we'll see what happens.
Yeah, and it starts right up and there's no drama.
It's running at a high idle at the moment.
We'll just get out and go around to the engine here.
We can hear the engine running
and it actually sounds pretty good.
I do hear, I don't know if you can pick it up
on that microphone,
but there's a little bit of a ticking noise
or a clicking noise, but it's really slight.
So honestly, this is actually really, really good news.
All right, I may have spoken a little bit too soon.
Now that it's been running for a little bit,
there is a noise you can hear
that you might describe as a knocking noise.
Now it's not that loud,
but it definitely sounds like it could possibly be
a valve hitting a piston,
which is obviously not a good thing.
So we're gonna let this run a little bit longer
and I am going to investigate
and we are going to get to the bottom of this.
So now that we have it running,
you guys may have noticed
that the air suspension is completely collapsed.
And well, now let's see if we can get it to reinflate.
And so if we look at the air suspension control here,
if I hit the up, it should go to normal height.
It says normal height selected there.
And here we are, I can feel us moving up
and the air suspension is reinflating.
So that is really good news.
Now the question is, will the air suspension hold air?
I don't know, but the fact that it was deflated
after sitting for a couple of years is no surprise at all.
So there's really not a lot of cause for concern,
but time will tell what the condition
of the air suspension is.
All right, so now that we know that the engine runs,
we have to ask the question,
is that noise caused by the timing issue
that these engines are so well known for?
And I think the answer is very highly likely a yes.
The real question to me is whether or not
the timing got so bad on this engine
that it caused the valves to contact the piston,
which can cause catastrophic engine damage.
The next step is to get out the test long
and we're gonna use this to take a look
inside the engine to find out.
In order to access the inside of the engine,
we first have to remove the ignition coils
and the spark plugs, so let's get to work.
Well, here it is, the test long.
Is anyone in there?
All right, so the test long has a camera
attached to this really long snake here
and it's got a camera lens right at the tip there
and then it also has another camera on the side there,
which is really handy.
Whoa, crazy.
All right, that's enough messing around.
Let's insert this thing in through the spark plug hole
and take a look at the cylinder.
So you can see the cylinder itself
and it's hard to see a lot of detail there.
So let's go ahead and switch to the side view.
You can see the valve there.
You can see some crosshatch on the cylinder walls,
but ooh, look at that.
On the piston itself, it does look like
there's an impact mark and on the cylinder wall,
you can see a lot of scoring.
If we go back up and take a look at the valve itself,
I don't see any major damage to the valve,
but going back down to the bottom,
yeah, you can definitely see some damage on the piston
and the scoring on the cylinder wall
also is not a good sign.
Despite the damage, it is not necessarily
the end of the line for this Range Rover.
Ultimately, I have to do a compression test
to determine the health of the engine.
I'm not expecting perfect compression,
but if the compression is acceptable,
then my plan is to go ahead and fix the timing
on this engine in the cheapest way reasonably possible,
and then go ahead and drive the engine until it blows up.
Well, not literally, but you know what I mean.
If the compression is bad, I still have a couple options.
Number one, I could do a rebuild of the engine.
Realistically, because of the scoring on the cylinder walls,
I would probably have to do a complete tear down,
hone out the cylinders,
and then the cylinder heads themselves
also may need to be rebuilt because,
well, if the compression is bad,
it could be because of leaky valves.
I've done a couple engine rebuilds before,
and I can tell you right now
that I really don't want to do another one
because it is just a ton of work.
Option number two, if the compression is bad,
is I could look for a salvage Range Rover
that was in an accident or something like that,
but still has a working engine,
and then just do an engine swap,
and frankly, that is a lot more appealing to me
than rebuilding an engine.
The cost of a used working engine for one of these
from a salvage yard is about $7,000,
which is far too expensive.
If we went that route,
this would not be a cheap Range Rover anymore,
which makes that not an option.
I will be doing a compression test on this
for the next video,
and frankly, I can't wait to see the results of it.
Thank you so much for watching,
and we will see you in part two.
