I Bought a Wrecked Audi RS7! Salvage Supercar for CHEAP!

Automotive Turbo
30 followers
20 Video Views·Oct 22, 2022
Hey guys, I'm Sam Kraken. This is my Ford Focus RS. Now, I know what you guys are thinking. Where's
all the body panels? Why is this all smashed in the front? Well, I actually bought the car like
this from a salvage auction. And if you're new to my channel, I like to buy cars from the salvage
auction and rebuild them. Not only can you save thousands, if not tens of thousands of dollars,
you make for a really fun project while you're at it. When I saw this specific RS at the auction
with only 7,000 miles in damage, I was convinced I could fix. I had to have it. I used the never
stop bidding strategy and made sure I was the last man standing. And well, here it is.
But that strategy can generally be pretty costly, especially if you get into a bidding war. Now,
there's one other strategy I use all the time, and it's basically where you throw in loose low
ball bids on really nice cars. How's 10,000 bucks sound for a 2017 Ferrari, which mysteriously has
some red paint beneath its black paint. Definitely have no use for this Lamborghini, but I'll
definitely pay five grand for it. 7,500 for 2008 Audi R8, sign me up. Now I've proven this method
to be 100% successful in losing an auction every single time. Except when it comes to this RS7,
my Audi RS7, and I am so thrilled to be telling you that. Let me show you around it real quick.
Well, it may seem that this car had a front end issue because all the front components are
missing. It was actually rear ended and pushed into the car in front of it. Right here in the
corner of the hood, it was bent back just a little bit, but I've already had it repaired
at a professional body shop. It was so minor to begin with, and now it's like it never even
happened. If this car were in a front end collision, it would be an absolute nightmare going
into the Audi parts department. There's radiators, intercoolers, and sensors literally everywhere.
Here's the original bumper from the RS7. This was on the car when it was in the ax, and even
though it's absolutely filthy dirty because it's been stored away for a little while now,
it is 100% perfect here. You might see some marks like this, but this car actually had paint
protection film all over it. You can see it's peeled up a little bit in the corner here,
and that completely saved this bumper from getting damaged, and that's really important
because you see this right here? This is a carbon fiber valance. It also has carbon fiber lower
grilles. This car had the carbon fiber package on it, and these pieces from the dealership are
extremely expensive. Even this front grille costs over $1,000, and there's a little camera that goes
there. I don't even want to know how much this costs. I've already had the rear end of the RS7
repaired so that the rebuild process is a little bit more seamless over the next coming episodes.
Before I show you what it looks like now, I'm going to take you back and show you exactly
what I saw in the auction photos and what it looked like when it arrived in person.
These are the exact photos from the insurance auto auction that had my Audi RS7,
the same photos I saw when I put in my lowball preliminary bid. Now, a preliminary bid just
means I bid before the live auction. Cars like this almost always catch a bid during the live
auction. In my case, this one didn't. My preliminary bid was the highest standing bid on the car.
This car was originally located in Austin, Texas, and I bought it sight unseen just based off of
these photos. From the front angle, it really seemed that none of the body in the front end was
damaged. I was very questionable as to why it was actually disassembled here in the front.
I didn't really notice any of the damage here on the hood. What I was mostly concerned about
were these front frame rails. That's the aluminum colored piece here. I'm not sure if they're made
out of aluminum or steel on this car, but if they were made out of aluminum, and if they were
damaged, they're really not meant to be repaired. As you can see, both the passenger and the driver
side frame rail look straight and complete as they were when they showed up, so that was perfect.
The only other thing I was hoping that showed up along with the car were these headlights that were
clearly not installed, and well, they weren't. When we check out the rear photos, it became more apparent
why this car was totaled out. That's the damage done here to the lower rear unibody. Now, one of
the other questions I had was whether or not this rear hatch was reusable or not. There's some funny
reflections going on in the corner here. Seeing it lifted up here made it seem like it was pretty
bent. From the other angle, you see that a body shop drew some arrows on it, probably telling us
that it didn't line up anymore, and also you start to question as to whether the hatch pushed into
the roof damaged the roof at all, which thankfully it did not because that would be a very difficult
repair, but I did notice the exhaust pipe sticking out here, and that could have just been the reason
why this hatch was lifted and left open. Also, seeing the rear bumper laying on the ground didn't
really give me any indication of how damaged it was at all, but it did come with the car, and as
I'm about to show you, it's not really usable anymore. Now, the interior got me really excited.
In all the interior photos, there's not a single airbag that's been deployed, although on the
dashboard, the airbag light was lit up, and you guys got to remember that a lot of these cars
aren't started. Just the power to the electronics are on, and that could mean that every single
light on the dashboard lights up until the car actually starts, so didn't know what to make of
either until the car showed up. Now, if an auction provides you an engine bay photo like this, I like
to google the same car's engine bay, so I'll just go ahead and type in Audi RS7 engine bay, and I
like to compare the photos. Most of the components here in the engine bay are very costly, so it's
good to compare and see if there's any missing pieces or any damaged pieces. Here from the
auction photo, it looked like there was really nothing damaged, and when comparing it with my
google image, with the exception of the upper cowl, everything looked complete and undamaged. Here's
exactly what the rear end of the car looked like when I received it in person. Absolutely no repairs
have been done at this point here. You can see the damage was concentrated towards the driver's side
of the rear unibody. Here's the original bumper. This is what was on the car when it was in the
accident. Obviously, you can see the damage here to the lower part of the bumper, that really big
crack right there. This is something that I personally wouldn't attempt to reuse, although the
top part of the bumper is not too bad, which actually made for damage that was quite a bit
more tolerable than if the smash was directly to the rear center. Now, what's missing here is the
lower diffuser. That must have been completely destroyed, and that part is extremely expensive
because it's completely made out of carbon fiber. Now, in these bumpers, there are a lot of usable
parts still, like this one exhaust tip right here or a few of these backup sensors that are left.
There's one here, and there's a turn signal on each side. So the rear end of my R7 came pretty
much disassembled from the auction. That was likely done by a body shop. As an insurance company,
we'll send a car like this to a body shop before they decide on totaling it. Body shop will go
ahead, disassemble it, and then assess the damages and give a quote to the insurance company. Now,
this is the corner over here that was damaged originally. We'll zoom in on the repair,
and you could see that that was pushed in, and now it's been completely pulled out. It still
is a bit unsightly in that area. However, there is a big trunk mat that will cover all that.
If that's not good enough for you, one thing that can be done is you could smooth over the pulled
out repair, and you could go ahead and paint it when it's done. And if you ever lifted up any of
that interior trim, you never even see it. There's also a ton of electronics in here for the rear
hatch area and all the rear sensors that go along with it. These are the shocks that will actually
lift the hatch up. So this car is being propped up by this broom. Otherwise, it turns into a
guillotine. And now I'm really excited to show you guys what the rear end of the RS7 looks like
repaired. Check it out. It came out really excellent. This rear bumper was sold to me
as a complete assembly. That's everything, including the valance, the exhaust tips,
the rear sensors like we just talked about. Everything in one piece. And guess what? It was
the same exact metallic gray color as the car itself. So I saved a ton of money by just buying
the entire assembly. Thousands of dollars compared to what Audi would have charged me at the dealership.
And check out those lines. There's really no telling that this car was in a severe rear end
collision. It's not even 100% assembled yet. There's a few last things that we've got to do,
but we're going to do it together in an upcoming episode. Our last area of repair on the Audi is
actually in the interior. Now before I go ahead and open the door, I'm going to warn you guys.
It's really dirty inside. I'm going to tell you exactly why. You notice when I open the door,
the window pops down a little bit. That's pretty common on these frameless window cars. And
everything is driven by electronics in this car. And these cars sit at auctions for a pretty long
time before they get sold off. So what happens is the battery ends up dying. Before the battery
ends up dying, it pops the windows down so that if you do open the car door with the battery dead,
the window doesn't shatter from being up. With the battery dead and the window popped open a
little bit, it gives enough of a gap here to allow some dirt to show up. And then your interior has
a nice sheen of dirt all over everything. Don't worry, I'm going to clean this up the second
I get done talking to you guys. Now our area of repair is right here, and that is the seatbelts.
Unfortunately, even though no airbags deployed, you can see there's not a single deployed airbag
anywhere, the seatbelts did lock up. And when I say the seatbelts, all four of them seem to
have locked up. You can see this one right here is not retracting, and there's a bunch of slack
because the driver was obviously wearing it. The same thing is apparent over here on the passenger
side, also locked up. Unfortunately, in my experience with Audis, all of the seatbelts
lock up, including likely the rear ones back here. I'm not even sure if this car has the
seatbelts in the rear because during the disassembly, the body shop took all of that
stuff apart. So they might be hidden back there somewhere, but I'm not sure, and I don't even
want to know. Wait, no, no, don't pop it up on the screen. I don't want to know how much of the
seatbelt assembly is for this car. Thanks a lot. I knew it was really expensive, and in most insurance
repairs, they completely replace these entire seatbelt assemblies. Imagine four seatbelt
assemblies at that price. That'll easily contribute to totaling a car out. Now, there is a solution to
replacing your seatbelts. You can actually repair the assembly, and we'll get into that when we
disassemble this car. But while we're at it, we might even have the opportunity to change the
color of the seatbelt from black to maybe something that would match these brake calipers. Now that
I've given you a complete overview of my wrecked Audi RS7, I'm sure there's one question that
remains for many of you, and that is, how much did you pay for it? And while this car will likely be
the best deal I've ever got at a salvage auto auction, if you consider the amount of savings
off of retail when I'm completely finished rebuilding it, it is the most amount of money
I've ever spent on a wrecked car, period. When I finish rebuilding the RS7, I'll give you guys a
complete breakdown on what it cost me from beginning to end, from buying the car at auction
with fees, to buying all the parts to put it back together, and paying the body shop in between
to fix the hood, and also fix that rear end damage. So you'll just have to keep watching, and I'll
throw in a few hints along the way. Now guys, if you're as excited as I am to rebuild an Audi RS7,
be sure to hit that like button. Also, be sure you're following me on Instagram, where I'll be
posting a lot of photos of the rebuild process of this Audi RS7 before they go live here on YouTube.
Guys, I want to thank you very much for watching, and I will catch you very soon.
