Vinyl Wrapping At Home With Amazing Results!

Devin Niemela
20 followers
2 Video Views·Oct 21, 2022
Vinyl Wrapping At Home With Amazing Results!
Good morning guys, welcome back to the channel. So I know in yesterday's video
I said I wasn't gonna start wrapping the Evo today, but I figured I might as well start today
I have nothing really better to do on the car. I have got anything else in the mail yet
So I might as well start today. It's supposed to be pretty warm this week
I don't know how long it's gonna take me
I would guess three days maybe two or three days to do the
Wrap on the car if you haven't seen the color I'm doing check out yesterday's video
I did a little color reveal in there. I'm actually not wrapping the old car. I am doing a half wrap
It's kind of a new thing and it's definitely a lot different. That's why I want to do it
I want to do something different
I'll just tell you guys what color it is if you don't want to go check out yesterday's video
Half the car is gonna be white snow camo
The other half of the car is just gonna be how it is right now the gloss white or the factory
Wicked white I guess they would call it. So I'm gonna get the car quick wash get it in the shop get all dried out
I'm not even sure what side of the car I'm wrapping yet. Probably whatever side has more damage
I'm guessing that's gonna be the passenger side of the car. So let's get something washed up real quick get in the shop and
Start wrapping. This is gonna be a super super fun day super fun video series
Let's go ahead those in black and white and get to work. I'm just playing
I remember when I wrapped the FRS
I got so much hate for doing it in black and white and honestly
I kind of regret doing it in black and white the videos are so boring to watch because there's no
Color to them definitely not doing that again
All right, the Evo's clean the Evo's in the shop
Let's go walk around the car and figure out what side of the car we're gonna wrap
So it's mainly the bumpers that are pretty kind of damaged on this car
I don't know if you remember back when that carport took off on me. It kind of did some damage to the rear bumper
I think the passenger side is worse. I'd say that scratch right there is like right on the center line
I may even be able to cover that up, but if I could just have that showing that'd be cool
But that one's gnarly that one's gnarly
So definitely a passenger side over here the sides of the car honestly are like perfect condition
But then if you come to the front these scratches were here when I got the car
They're kind of covered by the canards as half the reason I did the canards
They're still showing I could always touch those up, but those are kind of gnarly and then this side of the bumper is pretty good
Shape there's that from when I got hit in Vegas how long that happened, so I don't know
It's like the same on both sides. I guess but rear bumpers the main thing. I'm worried about I'm gonna measure it real quick
This center scratch here is like right on the lines
I think I could get that covered with the vinyl wrap
So I think I'm gonna do the passenger side of the car this thing's gonna look absolutely wicked guys
I don't know if you've seen the half wrap done before but it's pretty different. I am gonna leave the roof all
Gloss black so I just absolutely love that probably have to do the whole side of the car with one sheet
Which I know that's what a lot of professional vinyl guys
Do a rap dudes do just so all the camo lines up
But obviously when I come up here to here the camo is not gonna line up
I don't think from here to here the camo will line
You know the hood the fender not gonna line up, but I want to get this whole side done along with this pillar
This is all gonna be pretty strange to do honestly the really good thing about all this is the car is white
And I'm doing snow camo which has a it's the majority of it is white, so it's white gray and black yeah for the most
Part I think it's gonna be super super easy just cuz like I said it is gonna be white on white
That'll make the job a lot easier, so yeah guys. This is gonna. Be absolutely insane when it's done
I really get hope you guys stick along obviously the cars like it'd be done today
But the next few days the car should be done
I am gonna be wearing that GoPro so you'll have that like first person perspective kind of like you're wrapping yourself
If you guys are as stoked as I am make sure number one make sure you subscribe to the channel number two go down below
Hit that thumbs up button. Let's just get to wrapping
I need to pull off like the wing the mirrors the door handles some stuff on the hood like the hood scoops the hood vents
The taillights headlights, let's get to work
All right guys. I got a lot more off than I originally planned on taking off
Let's just run through real quick. I got the taillight off the wheels off
I even pulled that window as I get an extra five minutes pull it window
I was like that's gonna make it so easy to wrap now that top trim both door handles
Mirror that little corner piece there fender vent blinker front bumper hood vent hood scoop
And that's pretty much all I need to pull the only thing I didn't pull off that
I probably could pull off is this duck bill and the only reason I didn't number one
It gives me a good place to like just cut the vinyl right here and then go down and do that piece down there
Number two is double-sided taped on and I don't really feel like recaping it
You may be wondering why I didn't pull that apron off because I need that to match the camo on the bumper
So I think we're pretty much ready to start wrapping. I still don't know what I'm gonna do with that side skirt
I guess I'll look at other photos online. I know that black Evo. He has like a yellow camo wrap now
I'm gonna see what they did there
Like if they lined everything up or if they just slapped a different piece on cars super naked looking a little silly
But pulling all that stuff off is gonna make the wrap job go so much easier
All right. The first thing that we are going to do is clean all this stuff up right here
I'm just gonna grab some like soapy water get all that dirt and grime out of there
Let me know in the comments below what you think of this audio. So it's not the GoPro audio
It is audio from a lav mic. I just have it on my shirt. Well, you know what?
Let me know you think of it though. Is it better than the other GoPro footage you saw on my channel?
I really do like this style of like showing you guys every aspect, you know, you're kind of doing it with me. It feels
You know how easy it's gonna be a wrap guys. I'll have to lay knifeless right there. Other than that
There's like no tucking involved. I wish my FRS was like that. That should be good
I did figure out what I'm doing with this skirt. I'm just gonna wrap it separately. All right guys
Let's move on to some clay barring
This is like the boring part. I feel like of
Vinyling subscribe a chunk of clay bar if you buy a new kit
They're gonna give you like a little spray, but I'm just using soapy water same concept
Grab a chunk of clay. Make sure there's not a bunch of dirt in it. Just rub it on the paint if you feel anything
Like it's getting stuck to anything then sit there for a while till it's smooth
Yeah, all that junk just comes right off
I'll probably spend an hour on this car playing it and I'll check back with you guys in a minute
Alrighty, my friends. We are pretty much ready to start wrapping. The car is clay barred. We're done there
But the next thing I'm gonna do you're gonna be doing this twice or I'd recommend doing it twice
Grab me a clean towel a lint-free towel preferably and then we're gonna wipe down whatever we're about to wrap with
This here. This is 70% isopropyl alcohol. It's this stuff is so dang cheap
It's like I think this bottle is $2. So this is gonna remove any anything on the paint pretty much
It's gonna remove all the wax any like glue or any stuff like that. So there's some on a towel
I don't need that much but whatever and
We're gonna be wrapping the whole side of the car at once fender door door quarter panel roof pillar
So we're gonna wipe all that down
Every time you wipe down a panel to flip the rag around
There's not really any harsh panels on this car coming in here
It's gonna be a little bit rough
But other than that everything should be really really easy to do
Also anywhere you're tucking the vinyl aka in the doors pop open that door clean in here
As you can see, that's pretty disgusting in there
If you have your door handles out, make sure your window is down so you can still open the door
what I'm gonna do down in that crevice here is grab a squeegee and use a hard end of it and kind of
Get this rag kind of get this rag tucked down in there and get it all clean should be doing that for any of these
jams
Look at that done car is clean. Next up is probably to clean up the floor
Dang, this thing looks so white with nothing on it. Anyways next thing we need to do grab our vinyl
This may be a little bit tricky because we're doing the whole car pretty much at once. So in that case
Your best friend is going to be these here
They're called wrapping magnets. There's magnets with that are rubber coated
So you stick the vinyl to the car hit it with a magnet. It won't move at all
Anything we need to use knifeless tape on we're gonna have to run that right now. So this up here
We're gonna knifeless and I think that's the only thing on this whole side of the car
Knifeless tape is your best friend. Honestly guys you need it. Okay, that's done play some vinyl up on this thing and
Get it cut. This is where the anxiety kicks in ain't gonna lie kind of like building a new motor
It's like the first time you go to start it like oh, is it gonna run? Is he gonna run?
That's how I feel right now
Am I gonna fail?
Huh? I did not know that was aluminum. Wait, that's gonna be a problem
Aluminum fenders, too. Oh, yeah
Could definitely hear that. So if you're wondering what this is, this is Avery supreme
Gloss snow camo I decided to go for the gloss just because you know
I wanted to be subtle and it looks good white matches the factory white really well
So that's something I was kind of concerned about
Get a few magnets on there. I wish I had more right now. That'd be nice, but
What to do is what we got, you know, I have more than enough then not enough
Game time baby game time. I really really wanted to
Wipe it down one more time, but I don't see myself being able to get this vinyl off without getting the back of it dirty
so we have to trust that the first wipe the first wipe down it with isopropyl was
Perfect it was good enough. We got to pull it up quite a bit. So I should be playing up top whoo
Well, what do you guys think?
Give me a pretty crazy don't you think things gonna look really really really nice when it's all done
Just run through make sure we got optimal coverage everywhere. We should be good right now
What we want to do just go through cut off a bunch of excess vinyl
So like as you can see right here, there's a big chunk that needs to be gone
And then all this little stuff right here
It's really nice to use for like mirrors door handles all that
I'd like to stick my hand behind
This kind of stuff so you're not cutting on the car at all. All right, there's that right now
I'm kind of wishing I'm doing I was in the whole car, but I know that half wrap is gonna look absolutely wild. I
Think we are ready to start slapping down some vinyl guys
Exciting exciting if you have compressed air, you're gonna want to use it right now
What am I do here grab our compressed air and just try to get anything off
As soon as you peel this backing off this stuff is hella static II so it will attract a lot of
stuff onto the back of the vinyl
Get up in place for the last time make sure you have good coverage everywhere
We're gonna just start peeling this vinyl off. This is where
Real anxiety comes in
Attack it on the hood attack it wherever
I'm just gonna throw two tacks at the very front of the door and then we can peel this fender back up
Stretch it. It's so damn hot out. I don't need heat
This right here is called glossing the the wrap. So basically you want the fender to look like it's wrapped
Before it's ever wrapped
Just get that vinyl stretched on there glossed on there. If it's cold out use a heat gun
Haven't even used a squeegee yet and we already lost it. Where the frick is it? Very lightly mist on the vinyl
The other screech I have is made for wet squeegeeing this one's not but it'll be fine
Yo guys, so my GoPro ended up dying
What I'm gonna do is just set up this camera here run a time-lapse of me banging out the rest of the side of this
Car, I'm not gonna lie
It's a lot harder doing it this way than then just panel the panel
But I have to do it this way. So all the camera lines up enjoy this little time-lapse
All right, dudes front fender done door done pillar up to the front doors done so right halfway done
We got the rest of the pillar rear door quarter panel, and then we are done with the hard part of the car
Let's get it done
Time to bang out the rest of this thing a lot of this stuff. You can just set your blade in this crock
something like that
This is where a heat gun comes in handy and also a wrap glove
I really wish I had a wrap glove so I'm not constantly burning my finger
Just the guys if I can wrap a whole car so can you it's really really not all that difficult
I think a lot of people make it a lot more difficult
Sounding that actually is. Yeah, there's there's definitely learning curve to it. But if I can do it you can do it
All right. One thing we need to do before we get too far
We are going to go over everything with the heat gun, especially all the edges
If you have a heat glove put it on because you'll probably burn your hand if you don't I don't have one
So I got to do what I got to do just go over everything especially like in here
Make sure it's not gonna lift out
This is called post heating treatment get up in here every edge and then you can just go over the panel themselves
There's any air under there. It'll like push out. So you have an air bubble. You can drive your squeegee squeegee back in
Alright, we can push throw this thing back together
All right, guys, I've been at this thing for about nine hours now
So I think I'm gonna wrap it up right there, but overall cars looking absolutely amazing. I'm super pumped
I went with the gloss instead of the flat or the matte finishes
This is looking so freaking good guys, and I'm so pumped on it. Check it out. I
Still need to do the door handles. I'm not sure exactly what I'm gonna do there
I might just leave them all white or I might do a little bit of vinyl on those and then of course the mirror as
Well, I'm not to do that tomorrow. I may get this thing wrapped up tomorrow
I'm not really sure I'm taking my time on it
So I wanted to turn out as best as I can possibly get it so far. It's probably a 9.9 out of 10
There's a few little things anything's here and there but I'm so freaking happy toast with how this is coming out
If you guys enjoyed this different little bit different style of a video
We got that first person point of view up there with a GoPro on my head with the external mic
And then we got some detailed shots on the DSLR
So if you guys enjoyed that make sure you go down below smash that thumbs up button
If you made it this far in the video, that's pretty crazy because didn't be a long video on bedding
So go down below comment hashtag hashtag half wrap because that's what we're doing on this car
Pop ups gonna look absolutely amazing. I'm so pumped on it. Thank you guys for sticking along to the end. I'll see you tomorrow
