Engine Overheating - 9 Steps to Solve

BleepinJeep
7 followers
2 Video Views·Oct 21, 2022
Engine Overheating - 9 Steps to Solve
Hey guys, this is Matt with BleepinJeep.com. Today I'd like to show you how to troubleshoot
and diagnose your engine overheating issues. But first, please subscribe to my YouTube
channel right here and check out my website, BleepinJeep.com, for all the best off-road
videos on YouTube. Alright, so what you'll need to know is that there's many components
to your cooling system and they'll have to be working together to cool your engine. Sometimes
you can have one issue that'll completely shut down an overheated engine. Sometimes
one thing will go bad and you can keep limping along and then you'll have a second thing
go bad and it'll completely destroy it. So you could be looking for one, two, or more
components that are bad altogether. First thing you'll need to know is how the engine
and cooling system work, so let me show you. Alright, so here's a little diagram of your
engine and your cooling system. It all starts right here at the water pump. The water pump
spins and it pushes the coolant through the engine and it all stops right here at the
thermostat. The thermostat stays closed until the water warms up and then it opens up, lets
it go through the upper radiator hose into the radiator. It goes all through the radiator,
cools off. It's cooled off by your fans. You can have a clutch fan, an electric fan, or
two electric fans. And then it goes through your lower radiator hose back to your water
pump. As the liquid is heated, it expands. Some of that goes into your coolant recovery
system or your reservoir. And you also have a heater core over here which you can let
water in to heat the inside of your cab. So that's basically it in a nutshell. These are
all the components, not including your fan, your clutch fan, your electric fan which are
back here. And this diagram doesn't really show, but if there's anything wrong, it's
going to be one of these components, so it's not really that complicated. You just have
to diagnose the issue. Okay, so the second thing you'll want to know is whether or not
you have an open or closed system. Some of the earlier model Cherokees had what's called
a closed system. You'll be able to tell the difference. If you don't have a radiator cap,
you've got a closed system. You'll have a cap over here on top of the bottle. If you've
got the closed system, I recommend upgrading to the open system. Just do a search on the
internet for converting to the open system. And it's pretty simple. It's not that complicated.
But everything else is pretty much similar. There's a little different issues with the
closed system, but you'll still be able to diagnose the problem. So the first thing you'll
want to do is check the easiest components first. Check the simplest things. I'll go
ahead and show you those now. So the first thing you'll want to check is to make sure
that your radiator is not blocked or full of debris. If it is, go ahead and take those
things out. If it's got mud in it, hose it down, wash the mud out. Step two, you'll want
to open your radiator cap. Make sure the fluid in here is nice and clean. And while you're
here, check your cap. Make sure it's still got some spring to it and that the rubber
is still there and everything looks good. Also, open up your reservoir and check to
make sure that's clean as well. If it looks anything like this, go ahead and flush the
system. Also, make sure you're running a 50-50 mix of antifreeze and distilled water. If
you've got too much antifreeze, you won't cool. If you've got too much water, you're
going to rust. Okay, step three is pretty simple. All you've got to do is look for leaks.
If you find one, go ahead and replace that component. Don't just put stop leak in there.
Go ahead and fix the problem. All right, we're on to step four. If you've recently had to
replace the coolant in your car or if you've had to add fluid, then you might have an air
bubble in the system and you'll need to go ahead and burp it. Let me show you how to
do it. So you'll want to park it on a hill, but make sure it's not too steep or not too
shallow. You'll want it just about there. Okay, so to burp an open system, you're going
to park your vehicle uphill. You're going to make sure it's cold. I can't stress this
enough. Do not open this cap when it's hot. Make sure it's cold. Go ahead and open it
up and you're going to fill your radiator with 50-50 antifreeze and distilled water.
Once that's full, go ahead and start your car. Let it get hot. When it gets hot, your
thermostat in here is going to open up. It's going to suck the fluid down through the radiator
and into the engine. When it does that, go ahead and fill it back up. Do this over and
over and make sure this is full. You can help it along by pinching your upper radiator hose
on and off and that'll dispel some of the bubbles. It'll help the fluid through and
help the overall situation. If you do happen to have a closed system and you're not going
to change it, there's a little bit different process. You're going to park downhill and
there's a little sensor doodad back here at the back of the engine. You're going to take
that off and that will dispel some of the air and burp the system for you.
Okay, step five is you're going to check your lower radiator hose. This hose comes from the
water pump to the bottom of the radiator. It has a spring in it. Sometimes when people
change this hose, they forget to put the spring back in. So just feel it and I can feel that
that spring is in there. You can also start the car and rev it up and see if this hose
is collapsing. If it does, then you don't have a spring and you've got a problem.
Okay, step number six is to check your electric fan. Go ahead and turn the car on.
Turn the air condition on. If the fan comes on, you know the fan is working, but you're not done.
Go ahead and let the car get hot. When the car gets hot, the fan should also come on with the
AC off. If it doesn't, you'll need to replace the electric fan relay. Also make sure that your fan
doesn't have a wobble. Make sure that your wires aren't crossed, because if you do get your wires
crossed, it could be pushing instead of pulling the air through. And make sure that it doesn't
have excessive noise. Make sure that it's not shorted out. If it's shorted out, it could still
be working, but not working to its prime and causing problems with your alternator and your
batteries. Okay, step number six is to check your thermostat. Your thermostat is in here in this
housing, but there are several ways to check it. When the engine is hot, you can feel this hose,
the upper radiator hose, and it should be consistently hot all the way across going into
the radiator. When the engine is hot, then the thermostat is open, letting the fluid flow through.
If it's stuck shut, then you won't have hot water coming all the way through this thing.
You can also check it when the engine is cold over here. To check your thermostat when the
engine is cool, go ahead and open your radiator cap. Start the car and let it warm up. If the
thermostat is working properly, there should be a noticeable drop in the fluid level right here
when it opens to let the water through. You can also check your thermostat by taking it out of
here and putting it in boiling water. Since the thermostat opens at about 195 degrees when the
water boils, you should see the thermostat fully open. If you're going to do this though, I'd
recommend just putting in a new one because they're only about five or ten bucks for a new thermostat
and you're going to have it open anyway. Why not go ahead and replace it? One other point to note
is make sure that you use the recommended thermostat. A lot of people say put in a 180.
That's not going to help, trust me. Go ahead and put the 195 or whatever the book recommends.
All right, step number eight. We're almost there. Step number eight is to check your water pump.
Your water pump is right down here. Do this while the engine is running. Check to see if the pulley
is wobbling. If it is, the bearings might be going out. Listen to it. Make sure it's not making an
awful noise. You can also check your fluid here. If your fluid has little metal shavings in it like
you're mining for silver, then your water pump is probably bad. Sometimes what will happen is
the little blades on the water pump will get cocked at an angle and they'll start shaving off the
aluminum and it'll all start coming up in here. You can also go ahead and rev the engine. When
you rev the engine real hard, this water should suck down. That'll tell you your water pump is
working well, but make sure you don't take this off when the engine is hot. Can't stress that
enough. Okay, you've made it to step nine. Step nine is to go ahead and check your manual clutch fan.
What this is is a fan that has a clutch on it, a thermostatic clutch that changes the speed
depending on the temperature. You should be able to rotate this by hand when the engine is off.
Also, what you want to do is have somebody start the car, watch the fan, and then have them cut
the car off. If the fan spins for more than two seconds after the car is off, then you need to
go ahead and replace it. It's very, very hard to diagnose one of these, almost impossible,
so you might just want to go ahead and replace it just because. Also, make sure that you have
a fan shroud on. It's very necessary. Okay, you've completed all nine steps. If you haven't solved
your problem, I think you've missed something, go back and check it out. If you think I've missed
something, please leave it in the comments below. Keep in mind that if you have automatic
transmission like I do, then your transmission fluid also runs through your radiator, so don't
confuse a hot transmission with overheating cooling system. And if you're having problems
only when you come to traffic and you're staying cool on the highway, then you probably have an
airflow problem. Check your manual clutch fan, and your fan, and your shroud, and that kind of thing.
Okay, thanks for watching. Please subscribe to my channel, Bleepin' Jeep. If you have any questions
or comments, leave those below. And check out my website, BleepinJeep.com, for all the best
off-road videos on YouTube. Thanks so much.
