Everything WRONG With My CHEAP Porsche Boxster (Car Ninja Inspection)

Flying Wheels
10 followers
8 Video Views·Oct 21, 2022
On today's episode of Watch Jericho,
we are here with my 2005 Porsche Boxster
that was very cheap and a car ninja.
What is going on, guys?
I am Watch Jericho, and like I said,
I'm here with the car ninja and my cheap Porsche Boxster
so he can do an inspection on it.
And we also have some goodies for it.
We did a little trunk retreat
and pulled out all of this Motul
so we can get some fresh fluids in it.
Who knows the last time they were done.
I mean, we don't really have any service records,
but I did find out more good info.
The last guy that owned it was a pilot.
I mean, it's a Porsche.
It's just, it's a stereotype.
It's a stereotype for a reason.
I think he was a pilot for American Airlines
and he owned the car for like three years
and all of the owners have owned it for a long time
so they've all kind of taken care of it
and put miles on it.
So that's our goal for today is to take care of it
and see what it needs.
And it needs to be ready to go to Eureka Springs
and rip up some hills for a little bit.
So we're gonna jump in here, get it up in the air
and do a real inspection on the car.
So I didn't look at much when I bought this car.
Obviously it was a crazy deal.
The cheapest one that's probably for sale
anywhere right now at $9,000,
but it does have 200,000 miles on it.
So we're gonna take a quick look here.
It's clean.
It honestly does seem really clean for the mileage.
Like you can tell that they definitely
tried to take care of it.
Oh, an oil leak.
It's super, super, super clean.
Usually the valve covers will pour by now.
Really?
I don't see anything.
It's like dry.
Good thing is you don't have to mess
with the IMS bearing on this.
Oh, this is an IMS car actually.
But people say, so Rob says that it's gonna fail
any moment now.
He says that like it should fail today.
And then the guys I bought it from were like,
if it hits 200,000 miles, it's not gonna break.
No, it won't.
So.
Actually you cannot even do it because the bearing
is bigger than the hole that comes out.
Yes, so you have to pull the whole engine apart
to do this IMS, yes.
There is a kit, but I don't think you need it.
I mean, if you didn't need it this long, you'd get.
I'm hoping you guys are right.
And I'm reserving judgment for when Rob's right.
Cartridge oil filter under here, plastic housing.
All the underbody panels are still on it, which is crazy.
It's been taken care of.
I mean, you got good brakes, good discs, good tires.
I feel a little bit of a clunk
from the suspension sometimes.
I do wonder if the shocks,
the front shocks might be going.
But like the sway bar bushings look good
and the control arm bushings.
The shocks, they're original.
Original?
Yeah.
Wow.
This one has a leak.
Ah, there we go.
I heard, I thought it was coming from that side.
Yeah, right there.
Oh yeah, it's all over, isn't it?
I see the oil all over the base.
And the top, the sway bar bushing,
I don't know if that's coming from the shock,
but it looks a little wet, like the grease has come out of it
and it feels tight, doesn't it?
Nope, it's tight.
Okay.
Well, that's good news.
This drain hose here, this overflow hose has fallen off.
Put that back on.
It sure does sound great.
It's got that Porsche sound.
And then the other fun thing I've noticed
is it has drift stitches on the front bumper.
Nice.
They did a good job.
They drilled symmetrical holes.
Yeah, I would probably change and put some,
yeah, this one is wet too, the shock.
Both driver's side shocks.
Yes, so I'll probably just put some
of those things in some V6s.
Yeah.
Make it stiff.
Cool.
Well, that's better than I expected.
Honestly, man.
I thought there were gonna be a lot of bad bushings,
but these control arms look pretty solid.
Tires are brand new, so I'll just change the fluids
and that's it.
Cool.
Well, transmission fluid.
We gotta pull this cover.
Super easy.
Yeah, you have to take this cover.
You can not even see the drain plugs in it.
Well, I will pull those off real quick
and we'll get busy changing things.
We're gonna do engine oil, transmission.
I brought brake fluid.
I'd love to change it.
We'll see if we actually do.
What do you think?
Nine grand, worth it or nah?
As clean as it is, yeah.
Okay.
Yeah.
Well, time for me to start wrenching.
Cool.
Have at it.
All right, let's take a look at this oil.
I know we all wanna know what it's gonna look like.
Unfortunately, it is gonna be very hot.
Things I'm not excited about here.
This thing has been driven to Cars and Coffee,
lunch with the crew.
Honestly, this oil looks pretty solid to me.
No glitter.
I should have put a magnet in there.
I know the Porsche guys always put a magnet in there
for the IMS inspection,
but I don't see anything weird coming out.
I don't see any glitter in the sunlight.
That is a huge breath of fresh air.
I'm less worried about this car already.
No idea when the last oil change was done,
so I had to do it immediately.
Obviously, I've only driven the car a couple of times
since I bought it,
just because I didn't wanna put a bunch of miles on it
before we did this oil change.
Oil looks great.
I think we're home free.
Let me find the crush washer.
It either fell in there or it's still in the engine
and put this thing back together.
Also, they didn't even over tighten the oil drain plug.
Incredible.
Filter inspection.
The one nice thing about cartridge filters.
This is spotless.
Perfect.
When the sun was reflecting off it
I thought I saw a hint of metal
and I was like, oh no.
But it did not need the oil change.
I mean, it's pretty dark.
It was, somebody either changed the oil
and didn't reset the service indicator
or it's service, yes.
Yeah, it's had service too.
More good news on the Boxster.
Everything's coming up green, which is awesome.
And we're gonna swap out the crush washer,
put this all back together.
Done in just a moment.
The crush washer's in there, isn't it?
It sure looks like it is.
I was gonna grab a pick.
Perfecto.
Thank you, senor.
See you later.
Oh, found the dirt.
So it looks like you have to pull, yeah,
those two as well.
Oh, do you have to pull this entire?
No, no, no.
What I do, I just take all those four screws.
These ones?
And just pry them.
And then pry it down?
Yeah.
Yes, you wanna know what's not amazing?
This is a true life fact.
I bought this Surge quarter inch hex, which is M18.
And I wanted it because it's quieter.
It actually doesn't hit as hard, but it's really cool.
It's got a nice new body and it's quieter.
And it runs on M18.
And I probably used it twice.
And the spring that holds the hex retainer in
uncoiled itself and it no longer holds any hex stuff in.
Literally using it like twice.
It's like 501, isn't it?
It is.
They're gonna replace it for sure.
But my M12 one has never had a problem
with like thousands of hours.
Dude, I'd beat that thing to death.
And this one's, this one's a tank.
I'll go grab a pry bar.
Pry bar?
Yeah.
Pry bar right here.
Don't tell anybody.
Got it.
Secret pry bar.
Oop, there it is.
Little bit more.
Yeah, I do this all the time.
Nice.
The secret method.
I don't know what that is.
It's just like in the...
Very special socket.
Learn something new every day.
Yeah.
There is a special socket for changing
transmission fluid on a Boxster.
It's a triple square 16 millimeter
with a security hole in it.
Insane.
We actually were looking for the drain plugs
and they all actually show their 10 millimeter hex,
which is what the internet says they are.
And I got up under here and we started looking at it
and that is 100% not 10 millimeter hex or torques.
It is triple square with a hole in it.
And you have to have that for the fill plug
and the drain plug.
So Johnny and I did what everybody else would have done.
And we tried to start drilling through the triple square.
And of course it's a forged steel or something like that.
It's tempered.
Tempered.
It just immediately would not drill.
So we got a little, a start in it.
And that was the end.
So we're putting it back together.
Transmission fluid, another day.
And a couple of seconds later,
Johnny found the tool in his shop,
looking through some more toolboxes.
Look at that.
A triple square with a hole in it.
And it is a...
Yep.
It says 38 16, but it is a 16 millimeter.
So now for the fun part.
As you guys know,
make sure the fill plug comes out before the drain plug.
And they're tight.
Wow, that's tight.
Came out.
We're good.
So I'm gonna go ahead and pull the fill plug out.
It's right in front of the CV.
And we can do the drain plug.
So Johnny and I did a quick little check.
Stuck my finger in the oil and the oil looked new.
So here's the real test.
When we drain it, does the gear oil look new?
Here you go.
Brand new.
Whoa.
And just like that,
we've got it all refilled
with the Motul Gear 375W90.
That's the spec for this thing.
Now it's time to pour in some of their 5W40 over here.
So Johnny already filled up a big bottle
so we can fill it all at once.
You can see everything's cleaned up underneath there.
Maybe you can.
I don't know.
We tried to clean everything up,
but with the tray back on,
it's a little tough to see.
This thing is serviced.
So we're gonna fill up the oil.
And really all that's left here
is clearing the airbag light after we see what it is.
I think it's just a loose connection like everyone says
and clearing the service indicator
so it doesn't show up every time I start the car.
This car has been very well taken care of.
Johnny and I both noticed.
I mean, when there's new gear oil in the thing,
nobody changes their gear oil.
That's just, it's pretty unheard of.
So I was kind of mind blown
once the nice clean gear oil came out.
So one really interesting thing I had no idea,
on the Boxster oil fill,
it has a spring loaded funnel
that pops up when you pull the cap out.
Makes it easy though.
Yeah.
Super interesting.
They even built you this big old container
for you to spill oil in.
Keeps it out of the trunk for you.
Well, try changing the coolant reservoir.
Oh, I bet.
I bet.
It looks like a nightmare.
I think everybody's gonna love a new scent
I'm trying out personally.
It's called a Motul Gear 300.
It's in my hair and kind of all over me on my shoes.
So we'll see.
I'm gonna get some feedback on the street
and just see how people like it.
You know what they say,
gear oil is one of the best smells ever, right?
Yeah.
My wife is gonna be so happy.
Oh yeah.
With gear oil all over you?
Yeah.
Oh man.
They love that.
All right.
So we finally got some codes here.
Some codes on almost every module,
which is hilarious.
Let's see what's going on.
Knock sensor one.
Interesting.
It doesn't seem like it's missing.
So I wonder if it's actually a...
No repair data.
Passenger airbag off.
Open circuit, short circuit to ground.
So that's the one that's setting the light.
The one light we have on the dash,
we're gonna clear that.
Calm gateway, voltage supply below limit,
blah, blah, blah, blah, blah, blah, blah.
None of this matters.
Door H button.
What is door H button?
Every single Porsche has that code.
Do they?
Nobody knows, yes.
Inner SH stroke.
Yep.
So it has something to do with the door handle.
Okay, okay.
Door handle button.
Ah, but this doesn't have keyless go or anything.
Yeah, but I bet you it's the latch itself.
There's a code for number plate light?
Does it even know?
I don't think it knows.
And then right seat heater has a code, but it works.
They both work perfectly.
Yeah, let's just hit the button.
Goodbye codes.
Goodbye airbag code.
That's what I'm excited about.
Service interval written.
So we just reset the oil life.
I guess we can start it up,
see if there's an airbag code anymore.
If I can reach the key on the wrong side.
It's like...
Yeah, now it's not removed.
Seatbelt.
Still have the airbag code, unfortunately.
After clearing the codes three times,
we got the codes cleared.
Finally, no more airbag light.
It looks like we're good to go.
All right, man, thank you so much.
We have resolved all of the Porsche issues in one day.
No more service indicator, no more airbag light.
Yeah, time to go in the weather.
Dude, I haven't had to put the top up for two days now.
Took it to breakfast yesterday and here today.
So now I got to fix this.
And it needs a radio.
The radio doesn't work.
We are getting the cheap Porsche sorted out
and soon it should have no issues.
Until I go put the radio in
and then somehow it resets the airbag code,
you know it's gonna happen.
We'll clear it again.
All right, thanks, man.
See ya.
Have a good one.
We're all done.
I'm heading out to drive the Boxer.
Put some miles on it today and enjoy it.
But you guys know the drill.
Huge shout out to the Car Ninja
and head on over to German Motor Works in Wichita
if you have Porsche, BMW, Mercedes, stuff like that.
Audi, you know he works on pretty much
all the German cars, European stuff.
Huge shout out to Johnny for helping me out today,
letting me use a lift.
That is it for today, guys.
Thank you so much for watching.
Don't forget to head on over to shopwatchjrego.com
for cool shirts just like this.
And please like, share, subscribe,
do whatever you want to do.
And I will talk to you next time.
Nine grand, not a light on the dash.
Unbelievable.
