https://www.youtube.com/watch?v=gg2gl-fz2Qc

Automobile Lovely
11 followers
4 Video Views·Oct 20, 2022
Hey what's up guys, Alan with Sonic Electronics and this is Q&A. We have a question from BJ from
YouTube. He's got a really good question. How do you set your amp gain that is rated at 600 watts
rms to properly match your woofer that is rated at 300 rms? So the first thing you need to know
for anybody that's in car audio or any type of electronics, take some time, read Ohm's law. You
definitely need to know it will help you out with figuring things out and problems that you can have
when installing or anything electronic. However, always in all of our other videos we always state
just go buy a multimeter. This one was from Harbor Freight and it was like three dollars. So
everybody should be able to go out and get a multimeter. We grab this just to show you you
don't have to spend a bunch of money on a multimeter. Of course you can spend more if you
want to but this simply will work at a few dollars. So we're going to get started. We basically did
some math for you. Now you said you have a 600 watt amplifier and you want to dial it down to
match your woofer that's rated at 300 watts rms. Of course we need to know a couple different
things. We're looking for volts which is what we're looking for at the end but we need to know
our power which you've told us which is 300 in our case 300 watts but we need to know the
resistance which is ohms in our case for our woofers. So I'd imagine you probably in your case
either have a 2 ohm or a 4 ohm woofer. So we've kind of went ahead and did some math for you and
we're going to show you how this works. So basically what you're going to do it's power
times resistance so power resistance ohms so 300 watts times 2 ohms gives us 600. The square root
of 600 gives us our target voltage which is 24.49. Now we'll show you what that means in a minute.
Now if you have a 4 ohm woofer you're going to do the same exact thing 300 watts
you
