2021 BMW S1000RR gets an AKRAPOVIC EXHAUST Install & Sound Test

Telematic Soul
16 followers
20 Video Views·Oct 20, 2022
2021 BMW S1000RR gets an AKRAPOVIC EXHAUST Install & Sound Test
Yo, what is up, StamFam?
Welcome back to another video.
So in today's video, I have something exciting for you all.
This is something that I've been meaning to do
for quite some time now,
and I finally got around to doing it.
You see that big, ugly can right there?
Well, we're getting rid of it.
It's going, it's gonna be gone,
and it's gonna be replaced with...
Now, I actually don't know how to pronounce this correctly.
There's been a couple ways I've heard it pronounced.
I'm not really sure which one's correct.
You guys tell me down in the comments below.
Write it down phonetically.
I think it's Akropovic,
but I've heard Akropovic or Akropovic,
and I think there was another one I heard as well,
but it's kind of escaping me right now.
Anyways, this Akropovic exhaust,
or Akropovic, whatever you wanna call it,
was sent to me by Motovan.
So huge thank you to Motovan for sending this over.
They came in clutch,
because I wasn't actually considering
getting an exhaust this early on,
but they were like, hey man, we'll work with you,
and so they sent me an exhaust.
Anyways, let's unbox this thing.
So as you can see, I've already opened it.
I had to take a peek.
I needed to know what it looked like.
On the top here, we have installation instructions
and hardware to go along with exhaust.
And then we have the bracket
that goes over top of the exhaust.
I think this is called an exhaust hanger.
I'm actually 100% certain that's what it's called.
And then, in this styrofoam case,
we have our Akropovic exhaust.
Ta-da!
Look at that.
Beautiful.
And this is what's gonna replace our stock exhaust,
and this is gonna make our bike look and sound much better.
So first thing we're gonna do is remove this bolt.
And then we're gonna remove this right here.
This will loosen up the exhaust,
and we'll be able to pull it off.
This is a really easy install, guys.
And then we can just slide it off like that.
Super easy.
So down here, we have all the necessary hardware
to complete this installation.
We're gonna start off on the rear passenger peg here.
So you just take off this collar,
locks it in place.
Now, you just push up this pin all the way through.
Maybe grab it with a plier, makes it a lot easier.
And just careful of anything that might drop.
Put this bolt through, thread it through like so.
As you can see, passenger peg's still functional.
Now we're ready to hang the exhaust on the bike.
So first, we're gonna rip off this tape cover here.
Now we're gonna get this adjustable collar here,
slip it on top of this area here with the cuts.
This is where you're gonna tighten your exhaust.
Now you take your hanger, slide it over,
insert the exhaust, line up the hanger,
line up the exhaust.
Washer first.
Bolt should go through.
And there we go.
Exhaust is on.
Looks really, really nice.
Let's back up a little bit here.
Take a look at that.
Wow, wow, wow, wow.
And now, of course, let's do a sound test.
Okay, I'm not gonna lie, that kinda sounds the same.
But you know how these bikes are.
Most of the sound dappening happens down here.
And this is just a slip-on.
And not to mention, it is a bigger slip-on.
So I'm not really surprised, to be honest.
But it definitely looks a lot better.
So that's a plus in my books.
Other than that, I feel like, I don't know,
what do you guys think?
Do you think it sounds the same?
Is it a little bit louder?
Is it a little deeper, higher?
You guys be the judge.
What do you think, Alice?
Yeah, it's not as mean as I thought it would be.
Does it kinda sound the same?
Yeah, a little bit.
Oh, man.
It's all right, it's all right, guys.
It's on there.
It looks good.
That's all that matters, right?
Okay, guys, I screwed up.
So basically, there's a baffle in this exhaust
that I forgot to take out.
No, no, it's more like I actually didn't know
that there was a baffle.
As you can see right there,
there's a little rubber grommet.
And underneath that has a little screw.
Take the baffle out.
So I was obviously a little bit underwhelmed
hearing the exhaust.
I really thought that it sounded exactly the same as stock.
So we're gonna remove this now
and see what this exhaust truly sounds like.
Okay, go ahead.
Woo-hoo!
It's so much louder.
All right, turn it off.
All right, guys, so that's the install process
for a slip-on on the BMW S1000RR.
Pretty simple to do.
Of course, things will get more tedious
if you're considering a full exhaust system,
which is something that I am still taking into account
at the moment.
Maybe I will get one sometime in the future.
But at the moment, a slip-on is all I need.
Anyways, again, huge thanks to Motovan
for setting over this exhaust.
It's amazing.
You guys are awesome.
Thank you so much.
And yeah, I guess I'll see you guys in the next video.
Peace!
