YES, It's REAL - Fan Showdown SPECIAL

Tech Lover
46 followers
3 Video Views·Oct 20, 2022
So from time to time, I see comments asking,
how do I pick the fans that we use on the fan show?
Now, is it random?
Is it go in an order of some sort?
How's it work?
And for the most part, it's a little bit of both.
Sometimes I'll go in there and just grab the first four I see
or go all the way to the last page
and grab the first four from the bottom.
But every now and then,
I just kind of like to browse through it.
Like I might not even be shooting a fan show on video
or I'm just at work on lunch or just bored.
And I'm just going through looking at your guys' designs
because you guys come up with some pretty cool stuff.
And that's kind of what this video is about.
Sometimes the things I see are so intriguing
that regardless if they have any chance of working or not,
I just want to print them out to see how they fit together
and just kind of understand the idea behind the design.
And that's kind of what this is all about.
Now, I can't remember who sent this in,
but if you follow the channel
or you're subscribed to the channel,
you'll remember on the community tab,
I posted a picture of this little geared fan
and I was like, well, it doesn't really work,
but it sure does look good.
And a lot of you guys seen that, commented on it,
gave it a like or two and really wanted to see this work.
And luckily for us, somebody put in the hard work.
Thank you to Morning Brew for sponsoring today's video.
Quick question, what did your morning look like
before you subscribed to Morning Brew?
Was it something like mine,
maybe endlessly scrolling through Facebook or Twitter,
not really seeing anything worthwhile?
Well, now that I'm a member of Morning Brew,
my mornings are off to a much better start.
Morning Brew is a free daily newsletter,
Monday through Sunday.
It gets you up to speed on business news
in just five minutes.
Traditional news is dry, dense, boring.
Morning Brew is witty, relevant, and informative.
One thing that I've learned
since subscribing to Morning Brew
is that Dogecoin is going to the moon,
nor maybe not.
Either way, Morning Brew helps me figure out
what's going on.
So if that piques your interest,
head to the description below
and click the link to subscribe to Morning Brew today.
I mean, it is completely free
and it takes less than 15 seconds to subscribe.
So head on down there, click the link,
and get your morning started right.
So the other day I was just kind of hanging out
and I happened to see that I had a notification
from Twitter, or on Twitter,
and somebody had tweeted at me.
And it was somebody by the name of Contrail52
and they had said that they'd seen
the little gear fan here on my community tab
and that they were working on a version of their own
and they thought they might have it working.
And then later that day, or I think maybe,
maybe I don't know how long ago,
but basically later after that,
they said, hey, here's a little video of it working.
And it showed it actually spinning.
And after that, I was like,
when you get it all buttoned up,
make sure you send it over to me
because I'm sure you guys want to see it.
I want to see it.
And that's what we're going to look at today.
We're going to take a look at Contrail52's
geared fan design that supposedly works
unless he's a great video manipulator.
We're going to see if it works like a fan.
Either way, it's going to be my new,
my new best in show favorite fan I've ever seen.
Also this little, this color changing filament,
big fan, I think it's pretty cool.
But as you can see, things have changed slightly.
For one, this hub or the outer ring now has anchor points
so it can actually stay attached to the frame
and it won't move.
The planetary gears have changed slightly.
He's gone with a little bit of a different,
you know, gear tooth design.
But for the most part, they're pretty similar.
And the clock, well, the, it looks like a clock to me.
The center hub now has like these clock arms
or fingers on it that are going to have,
actually help, you know, aid in some airflow
if we can get it to spin.
And when you put it all together,
it looks like one of those fancy little watches
where you can see through the face
and you can see all the gears moving.
It's pretty fascinating.
I do, I do enjoy it.
I haven't used it yet.
I printed it out, as you can see,
it took quite a while to print it out,
but I haven't put it on a fan and tried it out
because I was waiting for you guys.
So let's, let's give it a shot.
Now, unfortunately he didn't send it over
any installation instructions,
but I know that it looked like he used
these little Noctua deals here
to hold the frame in place.
And I'm looking at the Twitter pic
and it looks like he's got one, two, three, four, five,
six of these little planter gears.
So I have one, two, three, four, five, six.
So I guess the first thing I'll try to do
is get that on if you have it that way.
Looks to be, there we go.
I think we got her to seat.
Okay, it's going around.
So I got them all in there.
The tricky part is the hub has to be
at the same height as the rings.
As I was putting it in there and, you know,
I was kind of just moving around with my fingers.
And if it's not exactly perfect,
they start to walk, walk themselves up.
And I think I got it relatively decent.
We're going to see if we can get it to spin up.
Also, you see, I printed all these guys
and then there's one that's green
because I had to print, reprint one
because one can mess up.
And this is cool.
At least you'll be able to track it a little better.
So here we go.
Let's see if it, see if it spins.
He says sometimes you got to give it a little,
little encouragement.
Oh, oh my God.
That's so fascinating.
Oh, hold on, buddy.
He's losing speed.
Get on, keep going.
Is this where we need to adjust our height a little bit?
I wonder if we lubed him up a little bit.
All I could find is some white lithium grease.
It shows gears on it.
So I'm thinking it's going to be A-OK.
It's better than nothing.
As you can see, I've already put some in there.
Let's see how, let's see if we can start from a,
start from a dig this time.
Oh, we can.
Oh my God, it's zipping.
How loud is that?
Let's, let's see.
Let's see how, what it sounds like.
So we're setting about 35.6 with everything off.
It's, it's so loud and it's amazing.
But I know what everybody wants to see,
including myself.
So now we're going to do the smoke test.
I'll give it, I'll give it another coating of lube
and then we'll smoke test it.
I actually want to show you guys what I use for the smoke test.
I saw a lot of you guys think I'm ripping,
ripping fat vapes, but I'm, I'm not.
What I'm actually using is just this,
this fancy Halloween smoke machine.
It's a, it's a fan stick.
I'll leave a link in the description below.
If you guys want a nice smoke machine,
this thing has done, done wonders for me.
And what I do is I just blow it through this tube.
Yeah.
This is just a tube.
Then I put this little plug in the end,
put some slits in it to try to smooth out that flow.
I think I'm going to change that at some point,
try to do something a little better,
maybe a bundle of straws or something,
because, you know, just trying to make it a little better.
But that is the secret to the smoke test.
So let's see how it looks.
