How to Knit a Seed Stitch Cowl or Scarf with Any Yarn

wool products
54 followers
27 Video Views·Oct 18, 2022
Learn how to knit a cowl or scarf in seed stitch using any yarn. Seed stitch is made entirely of knits and purls, which makes it a great stitch for beginners!
Source: Sheep & Stitch
Hi I'm Davina of sheepandstitch.com and today we're going to learn how to knit a cowl or
scarf using seed stitch and any yarn you have.
Now I love seed stitch because it's got a great nubby texture that lays flat and is
the same on both sides.
Seed stitch is also knit entirely out of knits and purls.
So if you know how to knit, purl, cast on and cast off, then you're ready to knit seed
stitch.
And if you don't know how to do any of these things, then you can check out my how to knit
video series.
Now this video is jam packed with a lot of information, so if you want to skip ahead
or jump around, you can refer to the chapter markers down in the description.
Alright are you ready to go?
Yeah?
Okay, let's start knitting.
So in this video we're going to learn how to knit seed stitch on flat needles like this
in order to make a scarf.
And we'll also learn how to knit up seed stitch on circular needles like this so that we can
make a cowl.
And we'll also learn how to cast off in pattern and also how to wet block if you decide that
you want your cowl or scarf to have a little bit of drape.
And of course we'll also learn how to calculate the right number of cast on stitches for any
yarn weight that you have hanging around.
So the cowl that I've knit up here is knit with bulky weight yarn and it's knit with
just one skein of Marta the Merino, which is a one ply merino yarn, so yummy.
Just one skein is needed to knit up this entire cowl with a little bit, quite a bit of yarn
left over actually.
So this is available in the Sheep and Stitch store and this is the color Sunset.
Now to knit seed stitch on two needles like this, you'll need to cast on an even number
of stitches.
So on this needle I've cast on 16 stitches, which is an even number.
Okay so the number of stitches that you need to cast on for your scarf really depends on
how wide you want your scarf to be.
Generally the number of stitches you cast on will determine the width of your scarf.
So if I've cast on 16 stitches here, I can be pretty sure that my scarf will be at least
this wide, but probably a little bit wider, probably like this wide.
It'll probably spread about an extra inch when I knit into my stitches.
So when you're casting on your stitches, just kind of eyeball how wide you want your scarf
to be and then cast on that number of stitches that equals the width you want and prepare
for it to spread out a little bit.
Okay so this looks pretty good to me, so I'm going to start knitting my seed stitch.
So seed stitch is basically a two row pattern and we just repeat those two rows.
So on row one, we're going to knit one.
So we'll knit our first stitch and then we're going to purl one.
So I'm going to bring my yarn up front because that's how we purl.
And then I'm going to go from the top to the bottom and we'll just purl that second stitch.
And that is the repeat for our row one.
Knit one and purl one.
So we'll repeat that.
We'll do another knit one and then we'll bring our yarn up front for our purl and then we
will purl that stitch.
So we're just alternating knits and purls and we'll just continue going.
Knit one and purl one.
And if you ever forget whether you are supposed to knit or purl, just look at the stitch that
went before.
So I've just done a purl stitch and I can tell from this little bump here.
So now I know that I need to do a knit stitch.
So complete your first row of seed stitch doing one knit and one purl.
And once you're done, we'll move on to the second row.
So now I've finished row one and you can see that my last stitch is a purl stitch.
So now let's work row two.
I'm going to turn my needle over and row two is really the opposite of row one.
Row two starts with a purl one.
So I'm going to push my needle from the top to the bottom and I've got my yarn up front
and I'm going to purl that first stitch.
We're going to purl that first stitch and then we are going to knit our second stitch.
And then we're going to purl and then knit.
So we're doing a purl one and a knit one and we're repeating this all the way to the end
of our row.
And that's all there is to row two.
We're basically reversing row one.
So try that out and work row two of your seed stitch.
Purling one and knitting one.
So now I've finished my two rows of seed stitch and that's pretty much all there is to seed
stitch.
We would just repeat these two rows until your scarf is the length that you like.
Or until you run out of yarn, at which point you would cast off.
So now I'm doing my last purl stitch on my row two and here's my last knit stitch.
Great!
So now I've just completed row two of my seed stitch.
And that's pretty much all there is to seed stitch.
You would repeat rows one and rows two until your scarf is the length that you want.
Now if you're a little bit worried about getting confused and forgetting what row you're on,
you actually don't even need to refer to what row that you're on for seed stitch.
I'll show you a little hack that I use so that I can knit seed stitch without referring
to row one and row two and all that kind of stuff.
So the one thing you need to remember about seed stitch is that you always knit your purl
stitches and you purl your knit stitches.
So let's see.
Here we've got a purl stitch here and you can tell by this little bump.
So remember that purl stitches can be recognized by their bumps.
So I've got a purl stitch here and I'm not going to purl into the purl stitch, I'm going
to knit into my purl stitch.
And here's a knit stitch.
My next stitch is a knit stitch and I can tell by this little V shape.
And knit stitches can be recognized by their little V shapes.
So I've got a knit stitch here and I'm not going to knit into it, I'm going to purl into
it.
So I'll bring my yarn up front and purl into that knit stitch.
Okay and here we've got a purl stitch.
So we're not purling into it, we're going to knit into it.
So we're doing the opposite of what the stitch is.
So we're not going to knit into it, we're going to purl into it.
So I like to think of it as opposites attract.
The opposite of a purl stitch is a knit stitch and the opposite of a knit stitch is a purl
stitch.
And if you don't believe me, you can look at the back of your knits and purls.
So here we've got a purl stitch and let's just turn it over and you can see that the
back of it is a knit stitch.
Pretty crazy, right?
And here we've got a purl stitch and I'm just going to pinch that.
If we turn it over, you can see that it is a knit stitch.
So it really is the opposite.
So when you think about opposites attract, you can think of the purl stitch not wanting
a purl stitch.
The purl doesn't want the same old purl stitch, it doesn't want the same thing as what it
is.
It wants the opposite.
It wants a knit stitch.
So you can think of all your stitches when you're knitting seed stitch as being kind
of experimental or being in an experimental phase.
They don't want the boring old same thing as them.
They want something new and different.
They want the exact opposite.
So our purl stitch is not into other purl stitches.
Our purl stitch wants a knit stitch.
So we'll give our purl stitch a knit stitch.
We'll give it the opposite of what it is.
Our knit stitch is not into other knit stitches.
Our knit stitch wants a purl stitch.
So let's give that knit stitch a purl stitch.
So you are giving your stitches the opposite of what it is.
It's into new things, new horizons.
It wants to experience things that are unlike itself.
So here we've got a knit stitch, so I'm going to purl that knit stitch.
So if you just remember opposites attract, then you will never really need to refer to
your pattern to knit seed stitch.
All you need to remember is that you're going to knit your purls and purl your knits.
You're doing the opposite of what your stitch is.
And you can also think of opposites attract.
So I hope that helps you knit your seed stitch.
Without a care in the world, all you need to do is look directly at your stitches to
tell you what to knit.
Now knitting seed stitch in the round is very similar to knitting on flat needles.
It follows the same general principle in that we are knitting our purls and purling our
knits.
We're not doing what we are supposed to be doing.
But we would cast on a different number of stitches.
We would cast on an odd number of stitches when we're knitting in the round.
So something like 19, 21, 23, these are odd numbers.
Whereas when we're knitting on flat needles, we cast on an even number of stitches.
So for this cowl, I have cast on 57 stitches with my Marta the Merino yarn.
And that gives me a cowl that is about 25 inches in circumference.
And after I wet blocked it, it spread out to about 26 inches.
So just a quick little tip, my needles that I'm using are 24 inches.
So from this tip to this tip, 24 inches.
And they are 10 millimeters in size.
In order to join this in the round, I need to stretch out my stitches so that they actually
meet.
So what I'm going to do is, right now my stitches are kind of bunched up.
And that's because I don't have that many stitches.
Remember, my finished circumference is only 25 inches and my needles are 24 inches.
So I need to stretch out my stitches so that they actually meet.
So what I'm going to do is push my stitches just like this.
Very primitive, right?
We're just going to push our stitches, kind of stretch them out so that they actually
meet.
And here we go.
So now my stitches are right up close to the points of my needles so that I can actually
join them in the round.
So here we go.
Oh!
So here's a tip.
I always like to give you guys little tips.
So some people have said that they don't like that when they join in the round, there's
a bit of a gap where they join.
So I have a little tip for you on how to minimize that join.
Now to minimize the gap between the join where we join in the round, what I'm going to do
is cast on one extra stitch.
So I've got my odd number of stitches, I've got 57 stitches, and I'm going to cast on
one extra stitch.
Now if you're worried about this messing up your stitches, don't worry because this extra
stitch will disappear very quickly.
It will not become part of our knitting.
So I've just cast on my extra stitch, so I've got 58 stitches on my needle now, right?
So what I'm going to do is I'm actually going to take my left needle and just grab that
stitch that I just cast on and I'm going to bring it over to my left needle just like
this.
And this yarn here may try to ride up and don't let it.
So just pull it down, I've just clamped my fingers around it and I'm just pulling it
down so it doesn't fall away.
And now my extra cast on stitch is on my left needle.
Now what I'm going to do is take this stitch right here, the second stitch on my left needle,
I'm going to bring my needle underneath it and then drop it over this stitch.
So I'm going to just pinch this first stitch here and I'm going to bring that second stitch
over it just like that.
So now my second stitch is over my first stitch and I'm going to transfer this stitch back
over to my right needle.
So I'm going to take my right needle and just grab that stitch back.
And my little tail end is riding up again, so I'm just going to grab this tail end and
just pull it down.
You're not going anywhere, buddy.
You're staying in place.
So now you'll see that our extra stitch has now disappeared and we've actually just joined
in the round.
That extra stitch is right here now and we have closed up any gap that may form.
So if you really want to be sure, you can count up all of your stitches, but I assure
you that that extra stitch has disappeared.
So now I have 57 stitches on my needle.
I don't have 58 stitches because that extra stitch is now down here.
It's joining our stitches together in the round.
When you do this, you minimize any kind of weird gap that forms when you knit in the
round.
So now we need to put our stitch marker in place so we can mark the beginning and the
end of our round.
So I'm just going to use one of my rings here.
I love doing this because I frequently do not have stitch markers around.
So I'm just going to take my ring and put it onto my needle and this will be my make
shift stitch marker.
So now we are ready to knit seed stitch in the round.
So in the round, our first row is going to be a knit one.
So let's do that.
We'll do a knit one and then we're going to purl one.
So we'll bring our yarn up front and we will purl one.
Here we go.
And we're going to repeat that, knit one, purl one, until we get to the last stitch
of our round and then we're going to knit that guy.
So very similar to seed stitch on two flat needles.
Knit one, purl one, knit one, purl one.
So let's work this round together.
And just a little tip, if you are knitting bulky weight yarn and you've cast on 57 stitches
like me, it may be a little bit tight because your stitches are kind of stretched out.
Don't worry about it, just kind of push your stitches up like this to get them all up close
to your needle point if your stitches happen to be a little bit tight on your needles.
So knit up round one and meet me back here and we'll work round two together.
So I'm nearing the end of my round one, doing a knit one and a purl one.
And here we go, my purl one and now I'm at the last stitch of my round and I'm just going
to knit that.
So now I've finished my round one.
So I'm going to bring my stitch marker over and now we'll work round two.
So round two is very simple.
We're just going to purl one.
So let's bring our yarn up front and we'll do a purl one and a knit one.
And we would repeat this, purl one, knit one, purl one, knit one, all the way to the last
stitch of our round, at which point we would purl one.
So the same principle applies to seed stitch in the round as it does on flat needles, meaning
that when you see a purl stitch, instead of purling it, you would knit into it.
And when you see a knit stitch, you would purl into it.
So it's not like stockinette stitch where you knit the knits and purl the purls.
With seed stitch, you do the opposite of what the stitch is.
So the stitch is a purl stitch, so you're going to knit into it.
The stitch is a knit stitch, so you're going to purl into it.
So work round two of your seed stitch.
So we're nearing the end of round two, and here's my last stitch on round two, and we're
going to purl that knit stitch.
Perfect.
So now you've completed round one and round two of seed stitch.
And now you would just continue knitting, repeating rounds one and rounds two until
it becomes the height that you want, at which point we can cast off.
I'm going to show you how to customize this pattern so that you can knit up a cowl in
seed stitch using whatever yarn and needle combination you have.
Now first you're going to need a measuring tape like this, and it's best if you just
measure around your head or whosever head that you'll be knitting this cowl for and
determine how large you want the circumference of your cowl to be.
So for me, I chose 25 inches because I like a nice narrow cowl, but if you want a really
long infinity scarf, you can consider going all the way up to 50 inches or even a 55 or
60 inches.
Just use a measuring tape like this, a nice soft one, and measure around your head and
determine the size of the cowl that you want.
And once you've done that, then you're going to write that size down.
So for me, I'm going to write down 25 inches.
So once you've determined your size, write that down and then we'll move on to the next
step.
So after you've decided how large you want your cowl to be and you've written that down,
then you're going to knit a gauge swatch.
This is my gauge swatch here, and I've used the yarn that I'm going to knit my cowl with
and also the needles that I'm going to knit my cowl with.
So this is a much thinner yarn than what I had previously.
This is an Aran weight yarn.
So I've knit up seed stitch.
And the number of stitches that you're going to cast on need to be larger than 4 inches.
So let's see.
My little swatch here is about 6.25 inches.
So when you cast on the number of stitches for your gauge swatch, when you're casting
on, your stitches are kind of bunched up.
So make sure that when you measure out those stitches, that you have at least 4 inches.
And as you knit your seed stitch, your fabric will grow and expand.
So at least 4 inches.
Now a typical gauge swatch is 4 inches by 4 inches upwards.
So 4 inches stitch-wise and 4 inches row-wise.
But I don't think we really need to knit a whole gauge swatch.
We can do kind of a cheat-y version.
We can cheat at it a little bit.
Because we're really only interested in the stitch count.
We want to know how many stitches make up 4 inches.
And that will help us determine how many stitches we need to cast on for our cowl.
So here I've knit up about 3 inches.
And that's perfectly fine.
If you're short on time, you can knit up 2 inches in seed stitch with your yarn and
needles and that should be fine as well.
So once you have your gauge swatch knit up, we're going to measure out 4 inches.
So I'm not going to measure right from the edge, I'm going to measure kind of in the
middle.
Because the middle area of our swatch gives us the best reading of our knitting.
So here I'm going to start right about here.
And I've got a split ring stitch marker here.
So I'm just going to mark that area here.
I'm just going to squeeze this stitch marker in.
Great.
And I'm going to measure from here up to 4 inches, which is about here.
So I'm going to bring in my second stitch marker like this.
And you don't have to use a split ring stitch marker.
You can kind of eyeball it.
That's totally fine, too.
So that's about right.
Okay, so now I want to figure out how many stitches make up 4 inches using my yarn and
needle combination.
So here we go.
2, 4, 6, 8, 10, 12, and 13.
Alright, so for me, using my yarn, this needle, and my unique tension made from my hands,
I get 13 stitches equals 4 inches.
So I'm going to write this down.
I've got a piece of paper here and I'm going to write down 13 stitches equals 4 inches.
So now let's do a little bit of math.
Now we know that 13 stitches equals 4 inches.
Well, what about 25 inches?
For me, I know I want my cowl to be 25 inches, so how many stitches equals 25 inches?
Now if this sounds a little bit like middle school algebra, you're pretty much right.
I totally remember learning this in 8th grade.
So I'm going to get my calculator out because I'm really bad at math.
So what we're going to do is figure out 4 times what equals 25.
So I'm going to go 25 divided by 4 equals 6.25.
So I know that if I multiply 4 by 6.25, then I get 25.
So if you don't believe me and you're really bad at math like I am, I'm just going to double
check.
So 4 times 6.25 equals 25.
Perfect.
So I'm going to do the same to this side.
So whatever you do to one side, you do to the other side.
Thank you, Mr. Anderson.
I totally remember that.
So 13 times 6.25 equals 81.25.
So 81.25 is the number of stitches we would need to cast on in order for our cowl to be
25 inches.
Obviously, we cannot cast on .25 stitches.
That's kind of funky.
So we need to either round up or round down.
If you remember, when we're knitting seed stitch in the round, we need to have an odd
number of stitches.
So I would cast on either 81, which is an odd number, or 83, which is also an odd number.
So depending on how much yarn you have or how you're feeling, you can cast on round
up or round down.
I'm feeling a little generous, so I'm going to cast on 83 stitches, and that'll probably
get me a little bit more than 25 inches, and I'm pretty happy with that.
So you can use this formula to figure out how many stitches you need to cast on so that
you can knit up the cowl of your dreams with the yarn and needles that you have at hand.
So once your cowl or scarf is the length that you want it to be, then we're ready to cast
off.
So we're going to cast off in pattern, and you can do this whether you're knitting on
flat needles or in the round.
So we're just going to continue in our seed stitch pattern.
Here's a knit stitch, so I'm going to purl into it, and our next stitch is a purl stitch,
so I'm going to knit into that purl stitch.
So now we've got two stitches on our right needle, and I'm going to take my left needle,
go underneath that first stitch, and bring it over the second stitch.
So now we're going to move on and knit our next stitch, which is a knit stitch.
So I'm going to bring my yarn up front and purl that knit stitch, as we do when we're
knitting seed stitch.
So we've got two stitches on our right needle, and I'm going to bring my left needle underneath
that first stitch and bring it over our second stitch.
So we're basically just casting off, but we're casting off in pattern.
Here's a purl stitch, so we're going to knit that, and then bring our second stitch over
the first stitch.
Now, when you're casting off, you want to keep your hand really nice and loose.
You don't want a death grip on your yarn.
You want your cast-on edge to be really loose, loosey-goosey.
So continue casting off in pattern until you have one stitch left on your needle.
I'm going to knit my last stitch and go underneath that second stitch and bring it over like
this.
Great!
So now I have one stitch left on my needle.
Now I'm going to get my scissors out.
Here we go.
And I'm just going to leave a seven or eight inch tail and then cut off.
Perfect!
So let's get that out of the way.
Now I'm going to take my little tail and bring it to the front of my needle like this, and
then I'm going to take that stitch that's on my needle and bring it over that little
tail end and then pull my tail through.
And now my stitches are secure!
Look at that!
Pretty cool, right?
Our swatch is off the needle.
For you, it would be a scarf or a cowl.
So now you can weave in your ends and wear your cowl or scarf out into the world and
enjoy it, or if you want your cowl or scarf to be a little bit wider or a little bit longer,
we can do a bit of a wet block to stretch it out.
So if you find that your scarf or cowl is a little bit too narrow and you'd want it
to be a little bit longer, taller, or a little bit wider, you can do that by doing what's
called a wet block.
And what that means is that you would take your scarf or cowl and dunk it into water,
and then push out the water, and then lay it flat to dry.
And you can actually use pins, like sewing pins, to pin your scarf or cowl in place.
Now that's fairly drastic.
When you do a wet block, you can basically reshape your entire scarf or cowl.
You can stretch it out quite dramatically.
For me, I don't really want to do a huge wet block, and I'll link to a video that shows
you how to do a wet block where I actually block a sweater.
For me, when I knit up this cowl, I just did a very light wet block.
And if you're only looking to gain an inch or two in your scarf or cowl, I think that's
a pretty good idea.
Alright, so let's get started.
How I do what I call a light wet block is I just have some water here, and I'm going
to lightly sprinkle my swatch on one side, and then I flip it over and do it on the other
side.
And then I just stretch it out to the dimensions I want it to be, and then lay it flat to dry.
And that's all there is to a wet block, or a light wet block.
So let's do it together.
You would take a towel like this and lay it down, and then put your knitting on top of
it, just so that your table or your floor doesn't get wet.
So I'm going to take some water here and lightly drip it onto my project, just like that.
So you can see it's staying on my yarn here.
It's not really absorbing.
And that's okay.
I just want it to wet it a little bit.
So I'm letting the water absorb, and if I flip it over, it has not seeped through the
other side.
So I'm going to wet the other side now, and I don't want it to be soaking wet.
Actually if I feel it, it has soaked through a little bit.
So maybe I'll just put a little bit more water, just a bit of water on here.
So I'm just spreading the water around like this.
This is kind of fun, actually.
It's not soaking wet, it's just kind of damp.
And I need more water because I'm working with a bulky weight yarn.
So here we go.
So now that my swatch is wet, I can kind of stretch it out.
So you can see that my swatch has actually evened out quite a bit.
When we first started, the corners weren't that even.
Now I've sort of stretched it out a bit, and it has moved a bit.
It has stretched out.
So I just want to stretch this out like an inch or so.
So I'm going to pull it like this.
And that for me is enough.
I think I can probably get about half an inch just on this swatch.
So if you don't want it to grow that much, you don't have to stretch it out too much.
And you can see that it really is stretching as it's wet.
You can really manipulate the fabric when it's wet.
So I'm just going to leave it like this, and then just lay it to dry.
That's it.
Just leave it alone like this, and by the next day, your cowl or scarf will have dried
in this shape.
And then you can wear it out into the world.
Pretty cool, right?
So that is how you knit a scarf or a cowl in seed stitch with whatever yarn or needles
you have on hand.
Thank you so much for watching.
If this video helped you out, then consider subscribing to this channel for more knitting
tips and tutorials.
And hey, visit sheepandstitch.com to drool over yummy yarn, knitting kits, and our ever-popular
pattern tutorials.
Okay, that's it for me.
I'm Davina of sheepandstitch.com.
Have a great day, and happy knitting!
