Fabricating Inner Porsche Fender | Metal Fabrication Tips & Tricks in 4K Video!

Four Wheels
11 followers
6 Video Views·Oct 18, 2022
What's up guys Ryan Kraus here with Translock for Porsche. Today we're going to be making the inner
wheel well tub on the Crucible Coachworks 996 plant in this project. That's a mouthful. Anyway
we already have the other side already made so what we're going to do is we're going to take a
pattern we're going to cut the sheet metal we're going to form the sheet metal and then we're
going to weld it together. I've got my TIG 200 over there this should be a breeze so let's just go
ahead and get started. Yeah looks good. So the technique that I'm using is called a flexible
shape pattern. What it does is while you're when you peel this off and have it all trimmed down
it'll retain the shape of the object that it's on so I'm going to get these nice curves
and this tape and then I can lay it flat afterwards and get my starting piece. All right so now I have
my base down what I'm going to do is mark detail lines I need to retain so edges maybe write some
notes on the actual piece and when I save it for later for the next piece I make I'll know where
it came from what it's for because I have a pile I have literally a pile of these in the corner.
So now what I'm doing is I'm taking this heavier tape that's clear and I'm going to layer it over
top the white tape and it's going to lock in the shape but I have to do it perpendicular to the
lower lower level. So you're probably wondering why I'm not using really wide tape to make this
faster because the thinner the tape the less likely it is to fold over on itself and actually
retain the shape I need. It's very tedious. This is the secret to getting a straight line
on a curved surface. Straighten up anyway. Cutting towards yourself in video is a good idea right?
Yo I'm a razor blade wizard I've only ever cut myself a razor blade once. This is a poster
board pattern I had made originally when I first made this tub so I don't need to remake it it's
because it's straight across and there's no there's no shape to this panel. Just to explain
what shape and form is, shape is when a panel is shrunk or stretched whereas form where it was
folded so like a piece of paper like this if I bend it over that's form. If I try to make a dome
out of it it'd be shape which I literally can't do because it's paper so it'll retain the form
it'll retain the form of this panel that I can just then lay it flat and cut it out so
yeah let's keep rolling. This is the scary part of the process. Will it peel in one piece?
Bam there we go now we got a pattern and it's already flipped inverse but as you can see it
holds the shape of the panel so not only do I have a pattern I can lay flat on a piece of steel and
get my starting cut I can also use this to check the profile of it afterwards so I can literally
lay it on top like okay this matches the other side I'm good to go. All right let's cut some
metal. So I'm gonna lay my pattern down here and I'm gonna trace it this is gonna get a good
starting point but I'm also gonna frame it so I have extra material to work with just in case
things move around because that does happen. All right so we got our new piece cut I made
sure that this side is very straight this one's a little curvy but that's okay I'm gonna trim it
later. What we're gonna do next is I'm gonna break this flange over so it's 90 degrees just like this
one is and afterwards I'm gonna shrink the edge to get this exact same profile and then we're
gonna go from there so let's just keep going. The lossy trick shrink that up here and all the way
up through there's gonna be a regular shrink that's okay I didn't say a bad word I would never
this is a professional establishment that calibrated eye that was pretty good all right
I always joke that I don't really measure it it's kind of eyeball stuff
I'd say it works out pretty well. So I'm gonna go ahead and I'm just gonna put some holes in
this panel and then we're gonna cleco it up and we're gonna keep moving on. Flash cut. I'm gonna
drill my holes on the actual body now then we're gonna cleco this up then after that we're gonna
go shape the next panel and then we're gonna clamp it weld it and be done. So what I'm doing at the
the cleco where you just kind of tap aside let that settle in and pull nice and tight.
Awesome. All right piece number one is ready now so now we're gonna move to piece number two.
For piece number two we're gonna be using a series of shrinks and stretches so shrinking on the edge
stretch down the center to match this one just mirrored. So let's just go ahead and get started
with it. All right so of course I'm using this Leibert shear that we converted to be a pull
max style machine with thumbnail dies. So this is actually shrinking the side of the panel down.
Now obviously not everyone has these at home what you could use is like a kick shrinker or one of
those even those manual hand shrinkers that would also do the job. I prefer to use this because it
just has a nice smoother finish easier to wheel out afterwards but like anything else there's like
80 different ways it's gonna cat so whatever works best for you. All right I know it looks
like a complete mess and it kind of is but this is part of the process. These edges have been
shrunk over there with the thumbnail shrinking dies so it's causing it to wrap up on itself.
So next we're gonna use the English wheel here and we're gonna stretch out the center we're gonna
force tip this flange over and then we're gonna see where we're at and it's just we'll work out
in the wash so let's keep on moving. The mallet to get started I might have to use a mallet here
when in doubt use a big hammer. Yeah need a lot more shrink in there it's starting to go but this
has got to get shrunk down and this is gonna go down a little bit more this doesn't need too much
more this is gonna need a bunch more here. For reference that's about the plane it's gonna be on
there so this is all gonna need to be shrunk here and this is gonna get shrunk and wrapped around a
little bit more but with not too much effort it already got that pretty far so let's go back over
there's for reference starting to get over there all these wrinkles are all what needed to be
shrunk let's go back over the library I'm just gonna I'm gonna focus on doing this part here
first because the biggest area has the longest distance that needs shrunk so yeah let's keep
going when life gives you dents there we go. So what I'm doing right now is I'm using a mallet a
plastic mallet here because I want to have a nice soft surface hitting it that has a good weight
and I'm setting it on the dolly and smacking it and just trying to wrap it around the dolly without
contacting the dolly because I don't want to stretch what I'm doing if I I have all the
shrink here that I'm working really hard on if I start hitting it with metal and metal especially
if this is a metal hammer metal metal metal it'll stretch back and I don't want that so
I'm just trying to tip it over and it's working so far the other the flamingo the patented flamingo
sometimes you just gotta start smacking it with a hammer goes where you want it to go I need to
get this rolled over and it might be time to hop in on the wheel here and just kind of tip it over
yeah let's do that it's nice light pressure because again I don't want to stretch it
I just want to have enough grip of the wheel that I can tip it and then light pressure on
the English wheel you can do what's called washing or if you have it nice and light here
you just dance over top the ripples you can straighten them out next thing I know you're
gonna use this for a YouTube thumbnail guy using English wheel with ear protection I see a look in
your face is that making sense now obviously you can't respond to me so I'm gonna assume you're
yeah because it is making sense I need my ear protection where's my drink so right now I think
I did as much shrinking as I need to do we up front any other shrinking I'm gonna fine tune
with a kick shrinker on the edge because the thumbnail dies just don't do the edges very well
we don't have a lot of a space to work with what I'm gonna do next is I'm gonna get the radius off
this throw the same radius in the English wheel and I'm gonna wheel this out to match this and
it'll kind of stretch out through here too okay that's the rest of the way we need to go and then
we'll take stock from there so what I'm doing here is I'm just washing out again we talked
about earlier washing out the worst of the wrinkles just up here trying to crown it to
where I need to be so I can actually work it so I'm just kind of dancing around the panel I'm not
really trying to do a consistent stretch just roughing it in and we'll finish it out later
all right so we're getting pretty close there's a lot of fiddling needs to be done where I need to
jump around all the machinery you've seen it already so rather than just beating a dead horse
we're gonna pick this back up when I'm ready to flange it so look at that flanged itself
now I spent some time dialing it in bent the flange whoever stretched it I think we're ready
to fit it up so let's go over to the car and see what we can do with it nice look at that
gotta push this up here a little bit but otherwise also the vice grip this is the
outer core panel do a little uh fitting to make it fit up there and we'll be good to go
so keep on moving all right so we got our piece fit up here we got a cleat coat on I put some
layout fluid down so then I can scribe it's what we're going to do here we have a nice cut line
here from the original panel so I'm going to take this nice scribe I'm going to scribe the edge
here and take the panel off and then we're going to cut it after that we'll clamp it up and then
we'll be ready to weld it looks pretty good not bad for a day's work I'm pretty happy with how
it came out I'm gonna have to planish that weld and smooth it out otherwise it's pretty much done
if you wanted to tackle a similar project at home you can visit eastwood.com for all your tooling
needs subscribe to our youtube channel we're giving away a mig 180 welder at 500,000 subscribers
also check out our channel as well we have tons of great TIG welding content over there
you're definitely gonna want to see we'll have the TIG 200 ACVC link below and as always thank
you so much for watching I'm JD make sure you keep it right here at Eastwood do the job right
