For Episode 6, we got the Boba Fett action sequence that we’ve been waiting 40 years for. So stoked and super inspired to create this one! Here is this weeks project inspired by the Mandalorian. Enjoy!
Paint: Rust Olium Metallic Silver Rust Olium Grey Primer
Boba Fett Vallejo Chipping Medium Vallejo Luftwaffe Cam. Green Vallejo Mahogany + Dark Vermilion Vallejo Gold Brown Clay Pigment Citadel Nuln Oil Culture Hustle Black 3.0 + Citadel Corvus Black Mahogany Brown
Music: Smooth and Cool - Nico Staf Lottery - Anno Domini Beats Savannah - ELPHNT The High Line - Causmic
Disclaimer: Some of the actions seen in my videos could cause bodily harm. I am not responsible for anything you do while attempting to recreate what you see me do.
Amazon Affiliate links are used above.Credit: Boylei Hobby Time
How's it going everyone? Welcome back to Boilie Hobby Time. Today's build was inspired by the
sixth episode of the second season of The Mandalorian. Boba Fett has been my favorite
character in the Star Wars universe for as long as I can remember. So seeing him again on the live
screen kicking butt was, well, made me feel like a kid again. I had this model kit sitting on my
shelf for a long time. I didn't want to do anything with it till he showed up in the second season.
I was pretty sure he would, but I didn't know what he was going to look like. So I made some
modifications with the Dremel and patched them up with some Milliput. It's always wise to wash
your hands after using Milliput. Apparently it can cause some skin irritation. I also
customized his pistol. In the episode he shows up with a brand new pistol that we've never seen
before. So I looked at a picture and tried to use some bits from other things I had lying around
to recreate it. I painted all of the metal pieces with a silver spray paint and I began
working on his clothing. I also made him a 3D printed belt that works with the holster that
comes with the model. In order to create the chipping of the paint on the armor I used a
chipping medium from Vallejo and I put that on the armor as I saw it in the reference photos.
I then painted his torso in a khaki color and all of his limbs in a mix of black 3.0
and citadel corvus black. I then airbrushed all of the pieces of armor with their base color.
Next up was the chipping process. I reapplied some water to the areas that I wanted to chip
and used a firm paintbrush to scratch away the paint revealing the silver underneath.
This is my first time ever doing this and I was really happy with how it turned out.
I found that if you use the side of the paintbrush along the edges of the metal it creates a very
convincing look. Once that was all painted it was time to start putting him back together.
I also added some extra details of color on his jet pack and began adding the fabric. I then
applied some water decals that came with the kit and I scratched away at those with some tweezers
to make them fit in a little better. I dusted on some clay pigment in places to make him look a
little more weathered and then I painted his belt and his holster. I added some final touches and he
was good to go. I couldn't find a stormtrooper for sale near my house so I found one in my house.
Borrowed it from a previous project. The nice thing about that is that it has a foot mount on
base that I can swap out any stormtrooper whenever I want so I'll just replace this guy.
Sorry bud. I then began drilling a series of holes down through the pieces of armor
so that wiring could get from his chest down to his foot and into the base. For the display I
used an 8 inch by 12 inch glass dome and I used some XPS foam for the base that I cut into little
discs and stacked on top of each other. After those layers were glued together I used the hot
wire cutter to give them a consistent edge. I realize a hot wire table would have been far
better for this. I'm working on getting one of those but for now I'll make do with this.
I then carved away a little rock for Boba Fett to stand on,
glued that to the top and I sanded down all the edges to make them nice and smooth.
I drilled a hole where the wiring will pass through the base and I mixed up my plaster
with water and Mod Podge. The Mod Podge helps give it a little bit more flexibility. I plugged up the
hole to make sure it didn't get filled in and I applied the plaster to the top with a palette knife.
Before the plaster was dry I randomly scattered some pebbles around
and then I filled in all the rest of the gaps with the plaster.
I used my finger to give the surface a little bit more of an inconsistent texture
and then I used a Mod Podge and paint mixture to seal the base. After that was dry I used some
isopropyl alcohol to get the surface ready for my glue and water mixture. Then I covered everything
but the rock in some nice fine sand and the rock I gave a black wash. I created some little bushes
by cutting up some scenic long grass and gluing it into little clusters. I let that dry for a minute
and I moved back to the base. Applied some scenic glue again and some flocking. Applied some dark
blended earth tones as well as some light blended earth tones. Sealed those in place
and then I glued some thicker dark foliage right along the edge of the rock. While the glue was
still wet I wanted to make some footprints so I used the stormtrooper's feet to do that.
I moved on to the long grass. I used a dark green at the bottom and I progressively made it lighter
as it went towards the top. Then I glued it in place. After I knew exactly how Boba Fett
was going to be standing I used the milliput to create the boots and I painted those black off
camera. I then pulled the wire up through the leg of the stormtrooper and into his chest
where I soldered it to the led filament. This was a little challenging because one of the solder
joints was inside of the chest of the stormtrooper so I had to have that done before threading
everything through. It was a tight fit but I got it working. I tested my circuit to make sure
everything was working and it was so I got everything ready for final assembly. I painted
the outside of the base with black 3.0. I wrapped the led in red cellophane. Drilled some anchor
holes in the base for the characters. Put them in place and call it good.
That is it for this video. Thank you all so much for watching.
Hope you enjoyed. Hope you have a great week. I will see you next time.