BUILD Ep. 1 || Putting A DIESEL In The Patrol....

The Weekend Car
26 followers
5 Video Views·Oct 18, 2022
Well, you heard it right.
The title of the video is correct.
We are putting a diesel in the built-not-bore truck.
I can't believe I just said that.
I'm kind of mixed emotions, a bit sad, a bit happy.
I don't really know how to feel about this,
but there's a lot of reasons why I'm doing this.
And you're probably wondering what motor
we're going to be putting in it.
Now, before we get the cat out of the bag
and let you know what engine we're putting in this car,
I want to take a trip down memory lane
and have a look back at what has been an awesome engine.
All right, guys.
Now, what we're doing today is something
that we've been looking forward to for a long time.
We're finally, finally going to pick up the engine.
Yeah.
That's filthy.
Oh, Jesus.
I take no responsibility for that.
Wow.
Watching back on that is incredible.
Honestly, it feels like just yesterday
when I was sitting there going,
I can't wait for this thing to be done.
I couldn't see the light at the end of the tunnel.
I just wanted the car to be running with the new LS motor.
I was so excited to hear that supercharger whine
and time flies.
Like see, we're pulling it out now.
I can't believe it.
Time's gone so fast,
but it's been about three years
and I'm going to do a full separate video
of why we're swapping this motor.
Anyway, enough reminiscing.
I guess it's time now to let you guys know
what motor I'm putting in this thing.
I guess in my opinion,
it is the best diesel engine ever built
for this application for what I want to do with it.
So without further ado,
let's have a look at the new TD42.
Wait, hang on.
No, that's not it.
It's a Duramax.
That's right.
Here she is all the way from the United States of America.
A 6.6 litre V8 turbo diesel Duramax.
Now these came out in the Silverados.
This one's actually an LBZ,
which came out of the 2006 Chevy Silverado.
Being all the Silverados and that,
they're like super popular in America.
There's a tonne of them around,
which means there's heaps of information,
parts, bits and pieces.
Now the whole range of Silverado
that actually add these motors,
there's a heaps of different variations
like LLY, LMN, LBZ, LB7,
all sorts of different bits and pieces.
But this particular LBZ,
for me it was the best conversion
because that's when the emissions
sort of happened after that year.
So it's the easiest one to sort of convert.
And also a bit of research with the bottom end,
crank, pistons, heads,
like it's a fairly strong combo.
Few of the other types of motors
had some little issues here and there.
So that's why I sort of ended up with this one.
Now we also got the gearbox to go with it.
So we'll be going back to automatic.
We've got the Allison 1000,
which is a six-speed auto.
That's sort of the weak link with these combos,
but it is the gearbox that came out with these motors.
So it should match up just fine.
Now I went with these engines
because they make a tonne of power.
And if you think about it,
these were designed for the Silverado.
They're a big American truck.
That's when you see all those big high-powered diesels.
Like these are the motors they use
when they have those massive 2,000 horsepower diesels
sootin' everywhere.
They use them for those big tractor pull machines,
the big F trucks they roll around on the street
with the wide offset rims, big lift.
This is the bee's knees when it comes to this Chevy engine.
So it's gonna make light work in this Patrol.
Putting this motor in the Patrol,
they're such a smaller car
compared to the stuff over in the US.
So it's gonna make light work of this.
It's gonna just be tickin' over,
be able to tow anything, go anywhere.
And that's the idea behind it.
Now obviously I'm gonna do a separate video
on why I've decided to change the Duramax from the LS,
because there's just so many different reasons.
And I've really thought about this for a long time.
So I'm gonna do a separate video on specifically that.
Now being so much power,
and I do wanna make this a bit more of a reliable tourer now.
The 80 Series is the race car.
That's got a ton of power.
It's full turbo, absolutely crazy to drive.
This Patrol needs to be my daily tourer now.
This is the one I'm gonna take traveling.
It needs to be reliable.
It needs to be torquey, powerful.
I wanted to go back to diesel for that reason.
Now they make a ton of power.
From stock, I think it's like 360 horsepower
and about 650 foot pound of torque.
So a ton of torque there,
which means I don't need to change anything on this motor.
Now, because I make a ton of power,
I'm gonna keep this engine completely stock.
Just run it the way it is to keep it reliable and simple.
And I'll tell you what, it costs enough money as it is.
Right, so what we've got here
is a stage two turbo from Garrett.
Now it's the biggest off-the-shelf turbo
they make for these Duramaxes.
And fun fact, actually,
the stock turbo on a Duramax is a Garrett.
So they obviously got the contract
to make the turbos for these engines,
which means it's pretty much just a bolt-on replacement.
Should go straight on.
Dude, this thing's huge, what a beast.
So obviously I used the Garrett turbo
on the 80 Series build before, made a ton of power.
This being the stage two,
should be good for about 650 horsepower,
I believe these things are.
Let me double check.
630 horsepower.
Now, for you turbo wizards out there,
what have we got on here?
The inducer is a 68 millimetre for the compressor,
94 millimetre exducer with a 0.58 AR ratio.
The turbine, we've got 77 mil inducer
and then a 68 mil exducer and then 0.9 AR ratio.
So this thing will bring this engine alive.
Now, my restriction with this whole build talking power
is the gearbox.
Those gearboxes aren't amazing.
They're only good for maybe 600 horsepower
with a billet converter.
That's all we're doing.
I don't wanna rip the gearbox apart and do a full rebuild.
It just costs way too much money for now.
Maybe down the track, we'll do some more upgrades.
So for now, we'll just wind this thing up
to the point where the gearbox can handle it.
There's a few other bits and pieces
and flashy bits that go with this to make it all work.
So I'll run that through in this episode as we do it,
but I just wanna get hooking into this thing.
What are we, two minutes into this episode?
New turbo's already going on.
Shit, there we go.
New turbo, old turbo's off, new turbo ready to go.
It didn't come out too bad, actually.
There was a couple of tricky bolts, whatever.
Pretty simple.
Now, while it's off, I'm just gonna change this bottom hose.
That's the oil drain, which was easier to undo there.
There's no, I was gonna get under there
while it was on the car.
So I'll swap that over to the new turbo,
but we're not gonna put this on in just yet.
Few more things on there I wanna do.
What we're gonna pull out now is the Y-bridge.
Now, the Y-bridge is the piece
that sends the boosted air from the turbo
straight into the heads and into the engine.
Now, from factory, they come out
with a little rubber boot seal,
which can pop out pretty easily.
It's a bit of a failure point on these.
Yeah, look, I'll get it out
and show you that part.
And then I've got a new piece from Pusher Intakes
to put in there, which will just make it
so much more reliable.
So let's get that out next
and then clean up that whole area
before this new turbo goes in.
Hmm, that EGR has to go.
Yuck.
All right, so here's that piece I was telling you about.
The Y-bridge is actually a two-piece
with some rubber o-rings.
So under a tonne of boost, I mean,
that can blow out, cause leaks, all sorts of problems.
So Pusher Intake, the legends over there
have made a one-piece.
Pretty common part that you put on these Duramax motors.
They actually sent this in bare metal,
which was cool, cause I could paint it the colour I wanted.
It would've just gone for a powder coat of black there,
but we could see the quality of welds on there as well.
So a really nice piece, single piece,
gonna be no issues with that.
So we'll get that in there once we do a new turbo.
But while it's apart, I'm gonna give it a clean up.
We're gonna take those intake runners off
and dip it in some petrol and let it sit overnight,
because there's a lot of that crap build up,
bits and pieces.
So we're obviously gonna get rid of the EGR on this,
so we don't have this recirculation issue.
And also the up pipes, which are going in the bin,
cause we've got some new stainless ones on there as well.
So it should clean up the whole system,
make it run a lot nicer.
So getting to cleaning that up,
rip those intake runners off, and then we'll start
probably getting this new stuff on here.
Alrighty, so we had the inner tape manifold parts
all cleaned up, got rid of that gunk and crap
using some diesel and degreaser.
Just put the wire bridge in as well,
so that fit in real nice and easy.
You can see it's way more free flowing,
like I can go straight through into that manifold,
and it's a single piece,
it's not gonna have anything blow out,
which is really nice.
So thanks to Pusher Intakes for that.
It's probably time for the turbo now,
so just gotta prep the turbo a bit,
get that drain hose on and everything,
and we'll sit it on, see how she's looking.
I've got all the fuel rail return lines and that to do up,
because I had to move some of them out of the way
for the manifolds.
But yeah, get them back on, and then it's turbo time.
It fits!
Hello guys, and welcome back to another
tech tip for this episode.
I hope you guys are enjoying this Duramax build.
Bloody long time coming, but anyway,
this is not in particular a tech tip video,
but more of a product release.
These are my favourite,
because it generally involves a giveaway,
which is happening in this one.
Stay tuned for that.
Before we start talking about what's in front of me,
it's coming up to Christmas time,
so very quickly I wanna let you know
we've got a deal happening with our website.
If you wanna get something for Christmas,
make sure you do it soon.
We need orders in by the 10th,
just because of COVID and shipping.
If you wanna get any orders, Christmas presents,
something for friends and family,
you wanna make sure you order that right away.
We're doing a deal, basically every shirt,
you get a free sticker, and with every order,
we're actually giving away a free little Christmas gift,
little something secret.
So if you wanna grab that, link down below,
and take advantage of that deal in time for Christmas.
Now moving on, in front of me here
is a long time coming product.
This is the Redarc Go Block.
Now, it's basically a portable dual battery system
in a nutshell.
It has all the same sort of features
that you would have in your four wheel drive,
only you could take it with you.
Now I actually had the privilege of seeing this
before it kinda got released,
when I went to Redarc for their factory tour,
and I was super excited about it back then,
and it's so much more refined now
I've actually got one in my hand.
So there's two models, there's a 100 amp hour
and a 50 amp hour,
and it's basically a full lithium battery setup.
You've got your little carry handles,
you can take it anywhere.
Inlets and outlets, so firstly inlets,
you can charge it like normal,
you can plug it into the wall,
so you got your 240 inlet, trickle charger.
You can also actually plug it in on the back with solar,
so you can put it, hook it up to your car solar panel,
or if you've got one of the Redarc
fold out solar panels, blankets,
you can plug it in with that and charge it on the run,
if you're at the beach or whatever.
So obviously talking outlets,
it's got the usual outlets,
you've got your cigarette lighter outlet,
a fridge outlet, an Anderson plug outlet
for any bigger appliances,
and then of course four USB outlets
to charge camera gear, phones, whatever.
Really smart piece of equipment as well,
like there's a tonne of different features,
it has your full battery charge,
what level you're at,
it's got a tonne of different fault finding stuff
with this LED switch here,
you can check what's going on with the whole system
if it has any dramas.
But yeah, super, super handy bit of kit.
I use it in the 80,
throw something in the back,
chuck a fridge in,
go down to the beach,
bring your fridge down to the beach,
have your beers cold while you're fishing,
doing whatever,
and it will last a very long time,
especially being lithium,
and 100 amp hour or 50 amp hour variant.
So the giveaway that's happening,
we have the 50 amp hour go block from Redarc,
we're giving one away on the channel
in this very episode,
all you need to do is comment down below
why you want to have one.
Why would you use it?
Do you have a car
that doesn't have a dual battery system yet?
Do you have one that does,
but you tend to go away from the car a lot,
you go fishing, whatnot.
Tell me why you want a go block,
and in the next episode on the Duramax build,
I'll be drawing a winner at random.
It's that easy.
So get commenting guys,
and let's get back to this build, shall we?
Alrighty, the next little mission
that we have to sort out here
is the oil filter.
Now, there's a problem with these Duramaxes,
they actually hit the chassis rail.
So the oil filter needs to move.
So apparently you got to get one of these adapters.
I picked this one up secondhand,
so I'm not sure where it came from.
It is new.
It was secondhand,
but it hasn't been used,
which means it didn't come with any instructions.
Perfect.
It came with a bunch of seals and screws
and bits and pieces.
So I think the plan of attack
is to pull this one apart.
I'm pretty sure there's like a water cooler in there as well
so that cools the oil as well.
So that whole unit comes out,
and basically we'll just start following all the galleries
and watch the direction it comes through the filter
and try and match it up
with how all these holes and galleries work as well.
A lot of the fittings need to come off that housing
to be bolted onto this one.
And hopefully we can just screw on this new filter as well.
So let's get the old one torn off
and then work out how everything works from there.
Righto, there's a bit going on here actually.
I've got the old filter apart.
Actually, let me grab this.
And now I'm starting the difficult part.
The passages are a lot different
between the original housing and the new one.
Like they kind of go in different directions.
So it's a bit hard to work out where all the bungs go.
Here, there's a couple of little like bleed valves
or passages that kind of work off a spring here.
It's a bit of a pressure switch.
But the problem is they've got different size springs
and actually different tensions.
So one's stiff and one's loose.
So I'm sort of trying to work out which is which.
Now the one closest to me
was the one closest to me here, which is in there.
And that bleeds between the outside
and the inside of the filter housing.
So I think between there, the outside,
well outside and inside,
on the top here, there's a passage.
There's a tiny bleed hole.
This side hole was to drill through.
There's actually a section that goes from that passage,
drills through and meets up with the inner one.
So I believe that this one here
corresponds with that one there,
which is that spring there.
So I'm gonna roll with that.
Now comment down below
or please contact me on Instagram or something.
If that is wrong, if you've done one of these
or you do duromats conversions,
that one with the weaker spring,
I'm gonna put in this plate here.
And then the other one, don't know where that goes.
I think it's this side one here.
Let's roll with that.
I'll put it all together and show you
and then let me know if it's wrong.
Alrighty, oil filter relocation is done.
Now it's not done completely
cause I need to properly tighten that up
and put some oil in there as well.
But that's sort of sorted.
But behind me, the engine's sort of sitting precariously.
It's on the hoist, it's on a couple of jack stands.
Anyway, I had to do that because it's sump time now.
Like most conversions, similar to the LS as well,
the sump's always wrong.
This sump fails with the chassis rails,
the humps at the back,
it hits all sorts of stuff, steering arms, whatever.
So had to get a new sump,
but I did have to pull that one off.
So I've already ripped it off
and pulled the windage tray out
because you reuse the windage tray,
you modify the pickup
and then it's a complete replacement single piece sump.
So that's the next thing to go on.
That's where I'm at now.
We're gonna clean out the bottom of the block,
put the new sump on.
And then that means
most of the motor conversion stuff's done.
The oil filter's out of the way,
the sump will fit,
clear the chassis rails and the steering arms,
and then it's pretty much ready to put in the motor.
Put in the motor?
Put the motor in the chassis after that.
Anyway, let's get the sump on
because after that,
we're gonna do some work on the gearbox.
Oh, so good.
You all might have brought out a ginger beer.
They normally just did beer,
but you know me,
I don't really drink beer.
Cold is good, I'll tell you why,
because it's getting warm here,
Humid and
The sumps on and I had to put the flywheel back on and those bolts are super tight the flywheel had to come off
Because the old sump had some bolts behind the flywheel holding the sump on stupid design
But anyway, the new sump doesn't have that which is good
Anyway, sumps on, torqued up, dipsticks in and flywheel is on
So as I mentioned, we're gonna do some gearbox stuff next to finish off this episode
It's the last little bit of conversion stuff
Now it's already been done because I took it to a transmission specialist because I've got a I got the old wheel here
Basically, there is a little shim stack where there's a threaded kind of nyloc nut that goes on there
There's a little shim stack of different thickness shims
a
sleeve and basically the new
Shaft that goes in to match the Nissan transfer case is a different length and on the back here. There's a slightly different thickness
Kind of washer where this plate sits into the gearbox and you need a bit of end float in there
There's a diagram I'll probably show you on the screen
Basically the preload and the end float on this shaft because when it heats up it expands, you don't want it to butt up
But that needs it's a really critical
Measurement for that thing so it doesn't jam up and bind up and basically destroy your bearings in the gearbox
So I only got it done properly
There was some different shims out to go in there. Obviously, I don't have those shims
So by taking it there that had the correct ones to measure it properly
Make sure it's correct because the last thing I do is put this thing in the car and then it breaks
So basically I had to take the back of the gearbox off to get this section off a few bits and pieces in there
There's springs and all sorts of crap. So you gotta be real careful
But now this is off. I've got a new gasket here ready to go on and basically
There's a whole assembly can go on to the back of the gearbox all good to go
We change that output shaft to match the Nissan
But also we don't do this now
But on the back of the transfer case once we get it out of the patrol
There's basically three different speed sensors that the transmission needs the signals to shift gears properly
There's one on the bell housing one in the center piece and then there's one normally on the transfer case
But obviously we're using the Nissan transfer case. So there's a tone wheel here and basically a hall effect sensor
Is it a hall effect or a luctor wheel?
anyway, one of the sensors that basically measures the speed of that third gear, so
I've got that drilled and tapped
There's another reason I took it down because you need a massive like inch or three quarter inch tap
So we're gonna hit these up and press them on but that'll happen when we do the transfer case
But now this has all been reassembled checked
The guys at the shops did the bearing was buggered which is good because they've replaced that so that saves me troubles down the track
so yeah, it's whack this on the back of the gearbox then that's the box sorted and
Yeah, we're looking pretty good after that. Alright, so just before I put this back onto the Allison
This is that back section. I was telling you about I think that's like the c5 or c6 clutch or whatever
But there's all these little springs and I had a look. I've got a screenshot of one of the
Manuals for this gearbox and there's I think there's four specific bolts that are used to tension up these springs
So we'll do that first
So they kind of pull up and once it's close you can throw the rest of them and then torque them up properly
But this is all stuff. You want to be careful not to fall out keep it in place. There's this Park
Switch as well that actually fell off when I pulled it out
So make sure that's in good and also this little gear here can fall off and it goes a specific way as well in the center
there and that's real crucial for that back spacing and
Preload as well on that shaft. So let's whack her in put this gasket on it only goes one way I think and yeah
Anyway guys that pretty much wraps it up for this episode. We've got an auto that's got the new shaft in it
We've put the new turbo on, wire bridge, intake bits, done the sump, done the oil relocation
We really started cracking on these conversion parts. So really the next step is to rip the Patrol in and tear it apart
So it's gonna be next week's episode. We take the whole cab off
That's what we're gonna do rip the car apart
Lift the LS out and then start looking at what we're gonna do to make the engine mounts drop the motor in do a bit
Of a test fit as well. So thanks guys for watching the channel comment down below what you reckon
We're putting a diesel in the Patrol. I never really saw this happening it kind of overnight
It just changed I'm like, you know what it's time to make that thing a little bit more reliable
I'm not gonna lie
Anyway, but do a full separate video on why I'm changing the LS to the Duramax because why don't I just start a whole new car
And put this in there. Why am I ripping it out?
So I'm gonna do a separate video on that so stay tuned for that probably be the next one me a couple of time
Whatever. Anyway guys, so make sure to stay tuned for next week's episode drop the link down below for the website
If you want to grab any merch, there'll be plenty there
Hopefully maybe sort of kind of and we'll see in the next episode on the Duramax build. Thanks for watching. Cheers
Guys if you like this video make sure to click up here to subscribe to the channel
Click over here for our latest merchandise on our website and down below or to the side
I'm not sure where it is is as our last episode if you haven't watched it click on that and check it out
See you guys
