Chances are you mountain bike is your most prized possession; here are 7 tips that will help you look after it and keep it running sweeter for longer 🔧
Check for loose bearing, keep your stanchions clean, replace the chain and pads when necessary, protect the paint and keep your bike clean, and don't overuse your MTB!
If you'd like to contribute captions and video info in your language, here's the link 👍 https://gmbn.tech/mI
Brought to you by the world’s largest mountain bike channel, the Global Mountain Bike Network (GMBN), GMBN Tech goes deeper into the bikes, kit and technology stories that help fuel your rides.
Our mission is to help you discover, dial-in and get the best from the latest cutting edge bikes and technology available.
With news and rumours, first ride exclusives, how-tos, the weekly GMBN Tech Show wrapping up and showcasing the week’s biggest tech stories, and more besides, if it’s off-road tech, it’s in.
Every week, of every month we seek out, showcase, and ride the newest gear and innovations from across the globe in an authoritative, inspiring and entertaining way to help you get the best from your rides. And when we’re not riding, we get geeky in an accessible, easy-to-understand way about forks. And shocks. And more to help you setup and maintain your bikes perfectly.
Engage with us every week on the channel and across social media – we’re here to answer every question you’ve got on mountain biking tech.
Mountain bikes may well be tough old things that can take a hell of a pacing out on the trails,
but they're not invincible. It's entirely possible that you're slowly, or actually in some cases
rapidly, aging your pride and joy. Let's take a look at those things that really do kill your bike
and more importantly, what you can do about it. Let's start with bearings, loose bearings in
particular. Every mountain bike, even one that doesn't have rear suspension, will still have
quite a lot of bearings on there. You've got your rear hub, you've got the free hub body itself,
you've got the bottom bracket, you've got the front hub, and you can have the headset. Then
added to that equation, if you have a rear suspension bike, there's going to be shock
mounts on there and any pivots that you have on the back, whether they use regular bearing races
like these or cartridge bearings, or if they use bushings. They all wear out and they all have
problems. If you ride with loose bearings, firstly, you're adding friction to your ride,
so that's firstly not a good thing. Secondly, in the form of, let's say, rear suspension,
if you're riding with loose bearings, just say two of them loose, maybe the main pivots,
that means there's going to be movement. That movement will translate to additional wear on
the other ones. It really is an essential thing to, A, make sure there's no hindrance to the
movement of your back end of the bike and that nice suspension action you're paying for, but
also B, to make sure you don't prematurely wear all the other bearings on there because it's all
connected together. Bearings, given the nature of how they use on a bike, they will wear out over
time. No bearing is going to be completely invincible. It's down to you to basically
maintain them as best as you can. Some bearings we've done videos on, you can basically eke out
a bit more life from them by flipping off the seals and putting some more grease in. It's not
going to improve a badly damaged bearing, but it will help a dried up bearing last that bit longer,
if need be. Now, what you're looking for is a bearing that is smooth and a bearing that has
no play in it. You will find a well-maintained bearing or a new bearing has a slight resistance
to it. That's purely from the grease that's on the inside and from the seals. If I just tweak
this one past the microphone, you'll hear that it probably doesn't have much of a sound. Whereas,
if I take a knackered old bearing, I think this is off Steve Jones' bike, you'll hear the difference.
What you're hearing there is, in fact, pitted surfaces on the inside. It's all grinding around
and the actual bearings have basically been dragging on the inside of the shells of that.
Bit by bit, that's falling to bits. If you continue riding a bike with these all over it,
A, it's going to feel horrible. B, its back end is going to be all over the place. You're going
to get ghost shifting, generally not a good thing. The long-term effect is it can damage your bike.
Make sure you keep an eye on all the bearings on your bike and you won't be ruining it.
Most mountain bikes these days will have a suspension fork on the front. Obviously,
this is a very old one. This is a Fox Talus. A problem with stanchions on a bike is they're
subject to ingesting all the muck and moisture into them. As you know, a suspension fork is
essentially made up of a few key components. Other than that, they're all the same.
The fundamental basics are the lower legs with the brace connected. That is known as the slider.
The upper legs here are known as the stanchion tubes. Then you've got the crown steerer unit.
Quite often, the upper tube stanchions will be one part and it's known as a CSU.
These essentially slide into the outer leg. There will be bushings on the inside of that. Then
there'll be a foam wiper and a seal. That's all there is to it. Of course, there's dampers and
other systems on the inside. The key to making your expensive suspension fork last is by firstly,
keeping them clean. Secondly, keeping them serviced. Even a basic lower leg service will
keep your fork going considerably longer than not doing anything. The last one is making sure they
don't look anything like this. If they do, stop riding them immediately because you're just
causing yourself more damage. This will have been ridden in poor conditions, probably
never serviced. Due to the telescopic nature of a suspension fork, as it's operating,
you are slowly pulling in mud and muck into the fork, which grinds up and down,
wearing out the bushes that helped the fork slide in the first place. Then, of course,
wearing out the more expensive legs. The bushes can be replaced. They're a consumable part. They're
designed to wear out over time. The legs are not. As you can see here, this one is in absolutely
awful condition. Effectively, this was a write-off, this fork. I've actually got this from
suspension tuners. This guy sent their forks there to get them serviced and went home with
a new pair of forks because these could not be serviced. Again, if you look at this,
this shouldn't make any noise going down here, but it feels like sandpaper. It's the worst,
if you can even hear that. 10 quid, 20 quid, 30 quid, 40 quid, 50 quid, 60 quid.
Lubricated even can help. If you apply some basic fork oil to these upper legs here,
just above the seals, compress your forks a few times, it will ingest some of that in there and
help basically keep them nice and supple. What you do want to be careful of when you are doing
this is make sure you don't get any oil near your brakes. Make sure that cannot happen.
Preferably do it with the front wheel removed from your bike just to basically safeguard yourself.
Keep them nice and clean. Do a lower leg service. It's a really simple job. People get freaked out
by a lower leg service thinking it's something crazy. Essentially, all it is is removing two
bolts from the bottom of the fork, pulling the lowers off, draining out a very small quantity of
oil, sometimes as little as 10 cc on there, and basically putting them back on again. It's very,
very simple. That will make your forks go on for a long time. Henry has just made a video on real
time fork servicing. That is something you're going to be able to check out and follow along
at home. Think of it as a bit of a cooking program. Nice and simple. Again, no excuses
for you lot. It's a nice easy thing to do and it will save you a fortune in the long run.
A worn chain. In fact, a worn transmission. This is something that is a consumable part of the
bike. You're going to wear it out. However, you can make it last a bit longer if you follow a
very simple rule. That rule really is replacing your chain when it's worn. Basically, it's quite
simple. If you replace your chain just before it's knackered, you're going to be able to make
your chain rings last longer and your rear sprockets on a cassette will last longer.
The reason for that is there's a thing called chain stretch. Your chain doesn't actually
stretch. However, the chain pitch will get slightly longer. The components of a chain are
you have these outer plates, you have the inner plates, you have the rollers. Basically,
they're effectively like bushes and you have the pins that go through them. Those rollers get worn
and in doing so, they enable the chain to actually, the links to stretch and move around.
As the pitch changes very slightly, as the chain stretches, what's going to mean is that basically,
it's going to wear on a different part of that tooth. The next thing you'll see is the teeth
will start hooking. You can see this on really old knackered cassettes and chains and on the
sprockets. The effect of that is your chain will start hooking onto the drivetrain. It wears them
into really fine points and then suddenly, you've got to replace everything. Let's say suddenly,
this is a thing that can happen over time. Get yourself a chain checker. Plenty available on
the market. They enable you to check your chain. Whilst you're at it, also, take a good look at
your chain as well and the rear sprockets and the chainring. You can actually look at the teeth
and you can see damage to them. What you're looking for or what you're not looking for
is hooked teeth. They're quite easy to identify. You can see a really worn out chainring against
a brand new chainring. They look very different. When you look at your chain, make sure if any
parts of the outer plate are stepped out a bit, that's a classic example of where the chain will
snap. That chain will snap under pressure, which means it's always going to be in a bad situation.
It throws your body weight forwards over the handlebars. Suddenly, you're using your face
as a brake. It's not a good thing. Make sure you keep an eye on your chains.
Brake pads. Obviously, you need brakes on a mountain bike and you'll be ruining the way
your mountain bike rides and performs and potentially some expensive parts of it if
you don't keep an eye on your brake pads. They pretty much do their own thing until they're
contaminated, in which case they're usually fit for the bin, or when you wear them out.
Basically, you're going to need to replace them. That is something you're definitely going to have
to keep an eye on because no brake pad lasts the same as another one. It completely varies on how
much you use your brakes, the size of your braking rotors, and of course, where you ride and the
conditions you ride in. A construction of a brake pad, you've got a metal backing plate.
Then you have your pad material. Essentially, they're bonded to that plate. When they wear out,
you can actually end up breaking just using that metal plate. I shouldn't need to tell you that
that's going to be damaging for the rotors. Actually, it can be really bad for the pistons
as well. Take care and make sure you check your brake pads from time to time. Very important.
When you do inspect brake pads, the best way to do it is to remove them from the caliper. I do
recommend putting some rubber gloves on, latex or nitrile gloves. The reason for that is you still
have oils and stuff in your hands that can contaminate the pads. This one is already
contaminated, so it doesn't matter that I'm holding it like this, but do take care and you
keep an eye on those things. There's one more thing that's actually very important and often
overlooked, is the disc rotors themselves. Quite often, people replace their brake pads when they're
worn out and just carry on on the same rotors. You usually can, but they're not going to last
forever because you're using metallic base pads on a metal rotor. You are going to wear
that rotor down. At some point, it will fail. It's important to check them. Be careful using
your bare hands on it because of the oils in them. You don't want that to go near the actual
braking surfaces. You want to check for any scoring on that surface. If there is some,
that's a good indication that it's worn out. The best way is to get yourself a set of digital
calipers or verniers to accurately measure the thickness. Definitely check your specifics with
your brake manufacturer. For your own safety, check it because the other alternative is using
your face as a brake. Worn out paint finish on a bike. Needless to say, you will have spent
some money on your mountain bike at some point and you're going to want it to stay looking good.
Now, some people are more precious about this than others, but what really counts is the fact
you're riding a mountain bike in an off-road environment. You're around nature's grinding
paste. That means mud, that means sand, that means grit. All of that stuff combined with the
way that you ride and the condition you ride in ultimately mean you're going to prematurely ruin
the look of your bike. It's going to get old and haggard a lot faster. If you don't look after it,
take some precautions. The obvious one to do if you have a brand new frame is to take care of it
before you even ride it by getting some sort of frame protection kit, something like Invisiframe.
There's various different brands that offer a similar service on the market, but essentially
it's a heli-tape kit. You cover up all the important parts of the bike that are typically
exposed to being rubbed and damaged from various different things. It can just be as simple as the
brake cables or the brake hoses rubbing your paint away. You can protect against that using heli-tape
The chain stays and seat stays on your bike are often subject to riding shoes rubbing on them,
depending on how you ride. If you ride flat pedals, for example, you're quite often a bit
more ankles in on the bike for a bit more support, in which case you're quite likely to rub some of
that paint off, so get them protected nice and soon. The same goes for your chain stays on the
top. You probably want a bit of rubber across the top of there to protect it from the constant
slapping of the chain on there because it takes paint off as well as basically making it sound
quite awful as well. You want your bike to be nice and silent. The other area you want to pay
attention to, of course, is the top tube of your bike. If you ride with any sort of knee pads or
any sort of armor on your legs, it's quite likely when you're moving around on the bike, you might
not realize this, but you will actually be rubbing the paint away slowly on the top tube of your bike.
Now the final one is the underside of the down tube and underneath the bottom bracket shell
where you're subject to rock strikes and other stuff from flying up. Now, day-to-day protection,
again, good old heli tape, anything like that is good to cover it cosmetically. However,
if you're doing something like a season at somewhere like New Zealand or Whistler or in
the Alps, then you're likely going to be doing chairlift-accessed riding, which means you're
going to be riding a lot rockier stuff and you definitely will have rocks flying up.
They're going to hit your frame and they can cause a lot more damage. Now, if this sounds like you,
you really do want some heavier-duty protection. I quite often refer to scotch, like a 3M scotch
rubber mastic tape. Now, admittedly, it's not the best stuff in the world, but for this
protective purpose, it's actually really, really helpful. If you want something a bit more heavy
duty and don't mind something doesn't look quite as nice, use a section of old tire. We see there's
quite a lot of season there. It's cutting it up and just putting it under the BB shell there
and the bottom where you get those worst rock strikes. Not cleaning your bike. Cleaning your
bike is the perfect opportunity to get hands-on with it and give it a thorough inspection. Now,
you want to be working around your bike systematically. Find a system that works for
you. I tend to work front to back. Everyone has their own way. Stick to it so you don't miss
any part of the bike. Now, what I mean by hands-on is get a grip of it. Get a feel of things.
Feel that back wheel. See if there's any play. Look at the linkages. See if there's anything
going on that shouldn't be going on. Run an Allen key around the bike. Make sure all your proper
bolts, your pivot bolts, all that sort of stuff, make sure it's all torqued up and tight and
as it should be. Pay attention to it and clean it. Hopefully, you won't be leading yourself to
a ruined bike that costs you loads of money. The last one is overusing it. You might think
me mad for saying something like this, but some people override their bikes and basically
classically wear them out long before their time. Now, whilst it's amazing to ride your bike all the
time, if you only have one bike, it can be a problem. Now, plenty of friends have got a single
bike. They commute to work on that bike. They ride them all week in the salt and the grime on
the roads. They go out on the trails on the weekend, riding in our typically wet UK conditions,
wearing out brake pads, wearing out drivetrains, constantly spending money on their bikes.
Sometimes, there is a better way. Having a rat bike is a pretty good way of doing this.
Now, build yourself up something cheap. Just get a second-hand bike. Put some mudguards on it.
Keep that as your rat bike for commuting, all the daily chores and stuff like that.
Pop it in the shops, riding to work, riding to college, wherever you need a daily for.
It doesn't matter if it's cheap and cheerful. It's not going to get nicked. You don't have to
worry about it. It's going to keep your pride and joy nice and clean and in better condition
for the weekends. Now, I'm not suggesting you don't enjoy your bike on a daily basis,
but just be aware that you could be prematurely wearing your bike out by using it constantly
all the time. It is a good idea to spend a couple hundred quid and have that second bike
if your main bike is an expensive suspension bike.
Well, there we go. There's seven ways you could be ruining your mountain bike. Hopefully,
a few tips you can take away and make sure you're not doing that to your own bikes.
If you've got any of your own tips like this, let us know in the comments underneath. We'd love to
hear from you. For a couple more helpful videos, click up here for deep cleaning your drivetrain.
That's something I recommend. Really, you should do that annually. Make sure it stays in good
condition. If you ride in conditions like ours, you probably want to do it quite a lot more
frequently. Click down here if you want to turn your bike into a commuter. That is turning your
existing bike, not buying a rat bike for that purpose, but pretty good video nonetheless.
As always, give us a huge thumbs up here at GMBN Tech. Click that subscribe button and
hit that notification bell. Cheers, guys.