2020 S1000RR Loaded with Carbon Build - Motomillion

Speed Enthusiasts
160 followers
4 Video Views·Oct 17, 2022
I just want to show you guys this very special S1000RR that we finished. As you see it's a
2020 or 2019 if you're in Europe. So let me take you through the bike and show you some of the
really cool pieces we have on there. Right over here in the front you see the carbon fiber fender
from Ellenberger. The difference between the street and the race one, this is the street one,
is this little hole here. That's how you could tell if it's a street or a race one. Right down
here we have the Geelys tooling fork sliders, the brake caliper cooling ducts from Motocoach,
and the party piece in the front here is the GP4 MS calipers. These just came out basically as
close as you could get to a MotoGP caliper and we got them on the bike. If you look in here,
one of the first things you should do on your bike are these radiator and oil cooler guards.
I can't stress it enough how much you need those on a bike to keep all these fins clean
and make sure that you don't puncture your radiator. Continuing on with the brakes,
we have here the RCS 17 master cylinder with the GP4 MS calipers. You have to run a 17 millimeter
master cylinder. This is what we call ourselves the ultimate RCS 17 Corsa Corte. It has a
stall bus quick bleeder. These things are a lifesaver. The Rizoma front reservoir with
the Tigon clear tubing, the ProTie pivot bolt that's in gold, and obviously the brake lever
guard that's the carbon one that's exclusive to us. In the background you see this badge holder
piece from Umber Carbon and the tank side panels, the frame covers, the shark fin. A lot of people
are getting these because they're breaking the plastic piece and this is perfect because it's
a lot stronger than that plastic pieces that's on there. Again for protection we have this RNG
frame sliders. These are the ones that offer the best protection because they stick out so much and
kind of look cool with that aerodynamic shape. GB Racing case covers again to protect the bike.
The Real Trick Gillies tooling oil filler cap. And continuing on with the Gillies team, we have their
rear sets on this bike. You might have seen these before. We really really like them. It really
complements the bike. And the vocal cords of the bike, as you see it has an SD Project GP7ER slip
on that's mated to an Akrapovic titanium header and mid pipe. Again as you see it loads of carbon.
The carbon frame covers by Ellenberger Carbon. The rear race rear hugger on it. Gillies tooling rear
axle slider along with the Alpha Racing spools. We were going to do a lightweight rear rotor on
this bike. We're still waiting for the wheels because we're actually getting away with the
carbon wheels on these bikes. We're going to be putting the OZ Katiba forged aluminum wheels on
this. There's been a lot of problems with these OEM carbon wheels from BMW. It's a shame but for the
sake of safety and just for half a pound heavier we're going to be putting the Katiba wheels on
there. And looking at the tail of this bike, again so much carbon but it looks so good. This is the
one piece monoposto tail. Monoposto in Italian meaning a single seater. You can't access under
here so this is just one piece. And right under here we have the under tail piece and we can't
thank NRC enough. New Age Cycles they sent us one of the prototype tail tidy kits so that we could
have this on this bike. It has the brake light and the turn signals integrated into it. This is
the nicest piece that you're going to get for this bike in terms of tail tidy kit. And quickly let me
tell you what the difference between the race rear hugger and the street rear hugger is from
on these bikes. As you see this is the race hugger. The chain guard is fairly short and that's the
difference basically. So the street one has a chain guard that's longer. The race one has a
shorter piece. Talking about the chain, it has a 520 conversion kit. This is the alpha racing
conversion kit with the EK3D black and gold chain. As you know it's our favorite chain. It's what we
use on all the bikes. And coming through again you see the Geelys root tooling rear sets. The
GB Racing case covers. The RNG sliders on it. And making our way up we got some great parts from TWM.
We have the TWM clutch lever. This thing matches perfectly with the Brembo. The carbon fiber gas
cap. The Geelys tooling steering stem nut. Obviously it's got to have the key chain on it.
And right down here we have the Ohlins steering damper. The stock one is a ZF unit that's not
adjustable. This is a very big upgrade over the stock one and we're happy to have these available
as well. And making our way to the front we have the Geelys tooling mirror block off plates on this
bike. And I think the party piece that made the biggest change in the looks of the bike is this
carbon fiber intake air duct. As you know the stock piece has these little slats here. I don't
think it looks that good. This carbon piece really really makes it look great. And also it has the
instrument cover right here under the MRA windscreen. It's the carbon piece. It looks really cool as
well especially if you have a clear screen. You can still see it through with the smoke gray screen
but the clear screen and the sunshine brings everything out. So guys this was a quick walk
around of this bike. We are really proud that we got the chance to work on this bike. A couple of
things missing like the belly panel. It's not available yet as of this video but you know
those are some of the next stuff. You might see this bike again once it comes to an update with
the newest parts. But if you like the video please give it a thumbs up. If you have any
questions or comments please comment down below. And again as I said before if you have a project
that you want us to work on. If you want a complete build from ground up. If you have questions don't
forget to give me a call. I'll be more than happy to help you out. Until next time guys have a good one.
