・Fabulous Paper Flowers: Make 43 Beautiful Asian Flowers - from Irises to Cherry Blossoms to Peonies With 270 Tracing Templates(Released on August 17, 2021) https://amzn.to/32d3IwP
I would appreciate it if you could read these books as well.
Konnichiwa, I'm Ebiko Yamamoto from Paper Decoration.
Today, I'm going to show you how to make a card that looks perfect for Mother's Day.
It's a card that looks like a carnation.
First, I'm going to make the paper part of the card.
I'm going to prepare a round object like a plate.
I prepared a 14cm diameter plate.
Next, I'm going to cut out a piece of paper.
I'm going to put a mark on the paper and cut it out.
Fold the paper in half.
Make a crease.
Put a pair of scissors in the crease and cut it in half.
I'm going to use one of these pieces.
Fold the paper in half again.
Make a crease.
I'm going to put a mark on the paper.
Fold the paper in half.
Bring the edge of the paper to the center.
Fold the paper in half again.
Make a crease.
Make a crease like this.
Turn the paper over.
Make a crease on the other side.
It should look like this.
Next, I'm going to use a piece of colored paper to make a card.
I'm going to use this piece of paper that I made earlier.
I'm going to use this piece of paper to make a card.
I have 7cm here.
I'm going to make a 12cm card.
This is going to be a 12cm x 18cm card.
The size of the card is up to you.
When you are making a card, make sure that the colored paper is thin.
The paper should be easy to bend.
The paper should be hard to bend.
The paper should be cut in half.
This will make the card stand up.
You can use any colored paper to make a flower bouquet.
I'm going to use a piece of paper that I made earlier.
Fold the paper in half.
Put some glue on the other side of the paper.
Make sure that the edge of the paper is well-glued.
Then, turn the paper to the back side of the page, and put the glue on the other side.
Cut along the edge of the paper.
Cut out a piece of Origami paper, like this.
Now, we are going to stick this onto the card.
We are going to stick the Nori on these two triangles, which we folded earlier.
Once the Nori is on both sides, fold the paper in half, so that you can see the Origami pattern.
Fold the card in half, so you can see the shape.
Now, we are going to put it on the card.
Open the bottom of the card.
We will put the ribbon on the card later.
We will put the ribbon on the top, because we want to put a flower on the top side.
We put the ribbon on the side where we put the Nori, and the middle of the card.
Close the gap between the two pieces, and make sure the other side is closed as well.
Open the gap between the two pieces, and make sure the other side is closed as well.
Now, the piece is in a three-dimensional shape.
Next, we will make the parts of the flower.
Find a piece of paper that is similar to the size of the flower you want to make, and fold it into a square.
First, take a piece of paper.
Let's take a look at how to do it.
After cutting it into a circle,
fold it in half.
From the middle of the fold line,
bring it to the center.
Fold it in half,
so that you can make a triangle of the same size.
Turn it to the other side,
and fold it in the same way.
When you spread it out,
you will see a line
that looks like a pizza,
just like a pizza.
Fold it in half again.
I would like to cut off
the corners of both sides.
From the middle of the fold line,
bring it to the center.
From the middle of the fold line,
bring it to the center.
Cut it into a circle.
Do the same on the other side.
Cut it into a circle.
Do the same on the other side.
When you spread it out,
it looks like this.
Fold it in half again,
and cut it in the same way.
You see six petals.
It looks like a flower.
I would like to make a carnation-like flower.
So, I would like to cut
the tip of the petals.
Bring the scissors
to the tip of the petals.
Cut it.
When you cut it,
move the tip of the petals
up and down.
Then, close the scissors.
Then, cut it.
It will be easier to cut the petals.
It looks like this.
The size of the petals
and the number of petals
doesn't matter.
You can cut them into pieces.
Like this,
you have made a flower.
It looks like this.
Now,
I would like to make
some flowers.
Prepare a piece of green paper.
Draw a line.
You want to put it where you want it to be, so you put the glue where it overlaps with the other pieces of the piece.
After putting the glue on the piece, you put the piece where you want it to be.
At this point, if possible, you want to put the piece where it fits inside the card.
I am going to put it on the board, like this.
But, if it jumps out while I am putting it on the board, there is a way to add another piece of card later.
For now, I am going to put it on the board so that it fits in the middle of the board.
As you can see, you can see the flowers from the inside of the Tsutsumi.
I am going to check to see if it is in the center of the Tsutsumi.
Yes, it is in the center of the Tsutsumi.
I am going to put it on the card, too.
I am going to put the leaves on the card, too.
When you put the flowers on the card, make sure to put glue on the whole card.
I have put the flowers and the leaves on the card.
I am going to put a ribbon on the bottom of the card.
I am going to put a triangle on the bottom of the card.
You can use any kind of paper you like.
I am going to cut a few triangles.
I think a long and thin triangle is good.
You can use a small one, or a big one.
It doesn't matter if the shape is different.
Once you have cut a few pieces, put some glue on the back of the card, and put it on the card.
I am going to put a ribbon on the bottom of the card.
You can mix different colors like this.
When you close the card, if the flowers are sticking out of the card,
you can make another big piece of paper, and double the size of the ribbon.
It's all right.
You can write a message on the card, or put a sticker on the card.
It's a fun way to arrange your pieces.
Please try to arrange your pieces, and have fun!