Let's make "5 DIY FALL Projects" using an Xtool M1 which is the first Hybrid Laser & Cutting Machine. It's a DIY Dream Machine! I have never used a cutting machine or a laser. It was so fun to experiment with so many products and ideas. Be sure to "SUBSCRIBE" so you are alerted when I post my Holiday DIY Decor using the Xtool M1 and the Rotary tool! Thanks so much for watching. Enjoy! Happy DIYing!!!! xo, Michele
T H A N K Y O U Thank you all so much for watching!!! I hope you enjoyed watching my DIYs as much as I loved making them for you! Be sure to leave any future video ideas in the comments below and don't forget to subscribe and click the bell to be notified of new videos! xo, Michele
FTC Disclaimer: This video is not sponsored. All items are purchased with my own money unless stated otherwise and opinions are my own. If I do receive products for free, I will always disclose them to my viewers and I will still always provide you with my honest opinion.
This video and description contain affiliate links, which means that if you click on one of the qualifying product links, I’ll receive a small commission if you decide to make a purchase. This does not cost you anything but helps creators like me to keep pumping out high quality content.
I am a participant in the Amazon affiliate program and others. Links are provided for your convenience as well as my benefit. Some links are not affiliated but are shortened to preserve space in the description box.
Hi everyone, it's Michelle from BellabranchDIY and thanks for coming back over to the channel
to watch some DIYs. Today I have a really cool DIY. It's actually something I've never done
before. I'm going to be working with a laser and which is also a cutter. It's an X-Tool M1
which is what I have and we're going to make some fall projects. You guys ready? Let's go!
Project number one is a cute hello pumpkin bag which is perfect for the farmer's market
to hold all your cute little pumpkins or flowers in there. First thing we're going to do
is clean the bottom of our X-Tool M1 just in case there's any residue. Our first project we're going
to be using some vinyl transfer so we're going to take this sticky mat and remove the plastic
on both sides and you're going to want to place your vinyl upside down so the color is facing
downwards. Now let's set this project up. First thing you'll do is go into the X-Tool Creative
Space and this is showing the inside of our laser and cutter. Let me do this just to refresh it to
make sure it's all connected and everything. There we go, that's it now. Now you can see what's in
there so we we put in that blue sticky mat and then you can see this is the piece of yellow
vinyl that I have there that we can iron on to our canvas bag. So I'm going to shut the lid
okay and there's a camera inside there so that's why it's able to see what we have on the screen.
So now we're going to go and grab the image and I have hello pumpkin and I'll just do scale because
I'm going to change it anyways and so right here there's a little locking feature. We want to lock
this because when I change the size I want it to stay in the same format for size. So I'm going to
go right up here because then I don't waste all the space down here and then also what we need to
do is we need to flip this because remember the yellow is on the other side so when we cut this
out we want it to be able to then iron down correctly so we have to make this backwards.
So now what we're going to do is we're going to go over here and we are going to blade cut okay
and we're going to find what this is which is the PU heat transfer vinyl. So this creative space
already has some things in there for us to use. Let me move this back over here.
Also the reason why we use this mat is it's sticky and then that way this stays sticky here
and then we're going to keep these all at the same measurements they already have there because
the tool the creative space already has what we want in there and it looks all good and then what
we're going to do is hit cut oh sorry not cut we're going to hit process and then we're going
to hit start and then we're going to hit the button on the outside of the machine. All right
so let's get started. I pulled this out of our laser and cutter and I'm going to take my little
tool which will help me to get all the little parts that are still sticking there in between
like the letters and then I'm going to take a little tote bag which I got this tote bag from
X-Tool. They gave it to me in a kit because they are nice enough to gift me this entire laser
and a bunch of stuff to mess around with. So now I'm going to take my iron and I'm going to heat
the PU vinyl and we're going to place that all over the hello pumpkin area until it is
permanently adhered to the bag and then we peel off the plastic and there you go how cute is that
but we're not done because I want to make this even cuter. So I have this really pretty velvet
orange ribbon to make it a little more cute and fallish and we're just going to tie a bow at the
top and that's it and we are ready to go to the farmer's market grab a latte and grab some
pumpkins and my imagination just went wild with doing this and we're going to do the next project.
Project number two is a fall laser cut wreath and I cut this wreath three times so I used
three different sizes and I'll link in the bottom where I got this SVG file. I got it from Etsy but
I'll link the exact one for you guys so you can use it and we are going to make this 3D wreath
which is so cute and look how amazing this is how this cut out. It already looks cool like this just
with the wood tone but we're going to make it even cooler. So I'm going to grab some fall color
paints and I'm going to use it very wet not a solid color because I kind of want it to be almost
like a stain and I just went through the whole thing and then added all the different colors.
Next I grabbed my green and same thing wet it down. I did that on all the leaves and the stem
that ran through the entire wreath and then I moved on to the next two pieces and repeated the
process and kind of changed up the colors a little bit and then when I was done I am ready to assemble
this cute little wreath and you see how the leaves are going in different directions while I'm
layering it. You don't want the leaves to kind of go the same direction so just be aware of that
and you're just going to kind of put a teeny bit of glue the hot glue in strategic areas just to
hold it down so it's not going to come apart. You can always flip it over and add more glue
if you want to make it extra extra secure but I found you only need a little. Next I grabbed that
velvet that I love and grabbed a little piece and then tied a bow at the top and we have a cute
little fall wreath that we can decorate in the house. Look how cute that is. I love the way this
turned out and it's so pretty and what a cool statement piece and I love the way the laser cut
this. I mean it really did a great job cutting this. This was my first time using a laser and
it was super easy to do all these projects and I'm going to show you throughout our cool fall
video. So now we're going to move on to project number three which is a cute sweatshirt that is
going to say Wicked on it. To make this cute Halloween sweatshirt I grabbed some white PU
vinyl and we are literally doing the exact same process we did for the Hello Pumpkin cute little
tote bag so you can follow those exact instructions and we are going to grab a black sweatshirt.
One trick I have is to grab another sweatshirt that already has a graphic on the front and use
something to measure. You could use a measuring tape. I just happen to have a nail file right
there and I grab that and then that way I know the height of where the top of my letters should
be. So I put that piece down and then kind of smooth it down grab the iron again and then slowly
went around there until it was perfectly heat set and this PU vinyl is so cool on here it literally
looks like you bought this from a store and look how cute my Wicked shirt is. I'm ready for
Halloween. Project number four is a cute anthropology style frame. We're going to start by grabbing our
wood frame and we're going to paint each section a different color. So I'm going to start with the top
and it's just going to be white and I just put that across the top right at the angle of where
each corner is mitered. So whatever style frame you have that's what you can use. I put a link below
to the one that I use. So I just continued along the frame until I got all four sides
in four different colors and then this is the cool part because this is for
Thanksgiving or fall time. Is that a thing fall time? So I cut out some letters that say thankful
with my little birch wood in my cute little laser. I'm calling it a cute laser because I think it's
adorable and we are going to add the word thankful along the side and I kind of did it at an angle
starting at the top grabbed a little hot glue and just placed them back and forth all the way down
until I covered one side with the word thankful and look how cute that is. That's my sister and
I when we were little so I thought that looked really cute in there and what a great little
project. Project number five are some etched wood coasters. Xtool was nice enough to send me
these little wood slices which are so perfect for coasters and one of the things is is that it's so
easy to etch on anything. So I made two coasters and look how cute they are sweater weather and
hello pumpkin season. I love how these turned out. Who's ready to get cozied up and have a pumpkin
spice latte? And here's a recap of all the five projects that we made. Well that was fun. I hope
you guys loved today's DIYs and trying new things. I have a link below to all the equipment that I
used and the Xtool M1 that I used. I have another video that's going to be coming out where I'm
going to show you how to make some really cool gifts for the holidays and you guys will love
these because I had to hold them back from this video but I'm also going to show you how I use
another tool called a rotary tool from them which is a tool that I'm going to be able to
engrave on wine glasses and some other cool things. So I hope you guys loved today's DIY
and until next time, bye!