Have a GARAGE or HOUSE Then you must watch this video!

O.P. Building
23 followers
#garage #DIY
Hi, mates! I got plenty of comments under my last video. People were saying that it was quite easy to break into my gate. I even started to worry myself. That’s why I decided to improve it a bit.
I bought a GSM alarm system here: http://ali.ski/3DubPG
I bought the central lock here: https://ali.ski/4ZHcq
By the way, everyone forgot to give you a link to a set of carbide drills from cobolt, so here's a link: http://ali.ski/hl__0a
Instagram - @lavilassanek
Сontact email - [email protected]: Made by Madman
Hi mates! I got plenty of comments under my last video.
People were saying that it was quite easy to break into my gate.
I even started to worry myself. That's why I decided to improve it a bit.
Well, give me a second to change and I'll get to work.
I'm all set. Let's do it!
Pure magic!
Next thing I'll do will be the secret catches that will keep my gate fastened to the frame.
And even if the bad guys decide to cut off the hinges, my gate will remain in the same position.
So I take a thin drill, close the wicket and start drilling through the entire section.
Then I drill the diameter I need with a 14mm drill.
For my next step I take a 14mm pin, a bit coned at the end.
I put it inside and weld it on around from the back side.
In total I've got 6 pins behind every hinge.
Then I decorate my wicket with such casing. It will protect my gate from the wind.
Great! Cool!
My next task is to make my gate safer. For this I need to install an alarm system.
A link to this item is given in the description.
I insert the batteries and get down to the transmitters.
I won't show you the unit installation for safety reasons.
But now I'll definitely show you the way the alarm reacts if someone breaks into my garage.
For now, the unit is running on batteries. This way I check how it will work in case of blackout.
Also, I decided not to install this noisy thing. I don't want my neighbours to freak out.
So let's begin the test.
I take the alarm fob and set the security mode.
That's it, the alarm is on.
Now I'll try to open the door with the transmitter on it.
Done! I've already installed a sim card in the alarm unit.
So I'm waiting for an incoming call.
Alright, my phone is ringing. Let me pick it up and listen what is there.
Zone. Window. Alarm.
The system telephones you to tell you the information like what transmitter has been
triggered and what zone has been trespassed. Quite interesting, isn't it?
As for the motion sensors, they also work perfectly.
These sensors were particularly important to me as I'm no longer afraid of breaking the gate.
But if, let's say, someone breaks into my neighbour's garage,
they can simply crush the wall and get into my property.
That's all I wanted to show you in this video.
If you liked this video, please press the like button and subscribe to the channel.
