How to Get Started with the ConnectedRide Com U1 In-Helmet Communication System

Speed Enthusiasts
160 followers
142 Video Views·Oct 14, 2022
Enjoy the ride without missing a beat.
Listen to music with the BMW Motorrad ConnectedRide COM U1
in-helmet communication system and talk to other riders on your tour.
Let's begin.
Turn the device on by pressing the centre button and the plus button for one second.
The LED flashes in blue twice to confirm the start-up.
Right after, the LED flashes in red up to four times to show the battery status from low to max.
When the LED pulsates in blue again, you're good to go.
For a Bluetooth connection, press the centre button for 10 seconds.
Then press plus to select Phone Pairing
to connect the BMW Motorrad ConnectedRide COM U1 to your phone or the TFT display of your motorcycle.
Now you can control your music playlists, for example.
Watch our other How-To video for more about pairing your motorcycle.
Let's chat.
Pair two BMW COM U1 devices by pressing and holding the centre button for five seconds
on both headsets until you hear Intercom Pairing.
They beep and flash their LED twice in blue when they've detected each other.
Hang on, pairing can take up to one minute.
By quickly pressing the centre button on one of the headsets,
you can switch modes between listening to music or talking to your passenger.
You can now chat with your riding buddy via Bluetooth Intercom.
Press plus or minus to adjust the volume.
Or, if paired to your bike, just use the multi-controller.
Enough said?
Press the centre and the plus button for one second to shut down the BMW COM U1.
Continue watching our How-To Series to get the most out of your BMW motorcycle.
