Frogging knitting, which is jargon for unravelling your knitting, is a frustrating but necessary rite of passage for every knitter. Knitting mistakes are bound to happen, and sometimes the only way forward is to unravel the knitting and start again.
It can be painful to watch all those beautiful stitches disappear with a simple tug. But once you’ve ripped back your knitting, a trickier situation arises: now that your stitches are loose, how will you put them back on the needle? Just jam them back on, willy-nilly? Absolutely not! There’s a right way and a wrong way to unravel your knitting. In this video, we’ll go over three ways to frog knitting.
** DID YOU KNOW? ** Knitters call unravelling “frogging” because it’s descriptive of what happens to your kitting: “rip it, rip it, rip it,” which sounds an awful lot like the sound that a frog makes: “ribbit, ribbit, ribbit.” Get it? Not the wittiest pun, but it’s stuck, and is now part of modern knitting vernacular. Cre: Sheep & Stitch
Sometimes you make a mistake and you need to rip back your work.
So you're unraveling and unraveling and unraveling and at some point you need to put your stitches
back on the needle.
So you're just going to jam the back on your needle, right?
Wrong!
What are you, a Neanderthal?
There's a right way and a wrong way to unravel your work and put it back on the needles.
I'll show you three ways to do it in this video.
When you're unraveling your yarn and you're putting your stitches back onto your needle,
it's really important to make sure that your stitches are not twisted.
So what does it mean to have a twisted stitch?
Let's take a look here.
I'm going to take one of my stitches off my needle and let's just take a look at the
anatomy of a stitch.
So let's make this guy really clear here.
So I've taken my stitch off the needle and you can see that a stitch is basically just
a loop, right?
And the loop consists of a right side and a left side.
So for the purpose of this tutorial, I'm going to call this the right leg and this side the
left leg.
You can kind of think of your stitches like the leg of a cowboy, like a bow-legged cowboy
or a cowgirl.
So you want to make sure that the right leg of your cowgirl is always on the front of
your needle.
This is my right leg, my cowgirl's right leg, and I'm going to make sure that the right
leg is on the front, just like this.
So when the right leg is in the front of the needle, then that means that our stitch is
untwisted, it is good to go, it is correctly seated on our needle.
So if our left leg is in the front of the needle, like, let's do that right now, this
would be the left leg.
If the left leg was sitting in the front, then our stitch is twisted.
And you can kind of see that it's not really sitting very evenly on my needle, right?
And if I try to knit into it, it's going to have a little bit of resistance, it won't
feel very natural because the stitch is twisted.
So don't get it twisted.
Make sure that the right leg, let's take a look again, the right leg of your stitch is
on the front of the needle.
So here we go, let's put it back on, and yee-haw, we are ready to go.
So that's our untwisted stitch.
Alright, so let's say I wanted to unravel or unknit a couple stitches.
So I'm not unraveling multiple rows.
Let's say I wanted to go from this stitch over to here.
So how would we unravel those stitches?
Well, what I would do is I would take my left needle and go into the stitch directly below
my active stitch.
So these stitches are live on my needle, and the stitch right here is right underneath
my live stitch.
So I'm going to take my needle, my left needle, and go into the stitch, I'm going to go right
into it from the front to the back, and then take that stitch off of my needle, and then
pull the working yarn, and now that stitch is on my left needle.
The right leg is in the front, as you can see, which is exactly what we want.
So let's take a look here, here's the stitch, this is the right leg, and it should be in
the front, and it just was.
So let's do that again.
I'll take my left needle and go directly into the stitch below my active stitch.
So I'm just kind of stabbing into it from the front to the back, like this.
Take my needle off, and then pull my working yarn loose, and now that stitch is on my left
needle, and the right leg is in the front.
Okay, perfect.
So we can keep on going for a couple stitches.
Here is my stitch below, so I'm going to stab into it, take my needle off, and undo the
yarn.
Here is my stitch below, stab right into it, take my needle off, and unravel.
So this is a great way to just unravel or unknit a couple stitches.
Alright, so let's say I want to rip back multiple rows.
So I want to rip all the way back to the stockinette stitch portion.
So the second method is a bit high risk, because your stitches are loose and they're off the
needles, so there's a risk that they could drop and that your stitches will be lost.
But if your yarn holds its shape really well and it's not too slippery, then you could
definitely try this method.
So what you would do is literally just pull your needle off of your knitting, and now
our stitches are just kind of live.
They're in a dangerous, precarious position, but the stitches are keeping their shape.
They're not slippery and disappearing.
So what I would do is just literally unravel it.
When I get near the point where I want to pick up my stitches, is take a thinner needle
like this, and then just kind of pick up my stitches.
So I'm going to turn my yarn around, and I'm going to just haphazardly pick up those stitches.
I just want to rescue them at this point, because they're loose and they're in the wild,
and I don't want them to unravel.
And I'm not trying to make sure that the stitches are untwisted or anything, I'm just concerned
with rescuing these stitches and getting them on the needle so that they are not loose.
We're on a rescue mission, and we're just picking up those stitches.
Here's my last stitch, perfect.
So now my stitches are on a rescue needle, on a little lifeboat needle, but they are
definitely twisted.
Some of them are twisted, some of them are not.
I'm going to turn my work over, and now we're going to transfer these rescued stitches onto
my needle, and we'll make sure that they are untwisted.
So now I'll transfer my stitches from my safety needle to my regular needle so I can start
knitting.
I can start transferring from this safety needle to my regular needle this way, but
because the needle I'm knitting with has a stopper at the end, what will happen if I do it that
way is that my working yarn will end up being close to my stopper.
So how am I going to knit with my working yarn like that?
What I need is for my working yarn to be closer to the tip of my needle.
So what I'm going to do is start picking up stitches from the back.
So I'm going to turn my work over so that when I pick up stitches this way, when my
stitches have all migrated over to my big needle, my working yarn will be at the tip
of my needle, which is what I want.
Now if you're using circular needles or double pointed needles, then it doesn't
really matter, but because I'm using a flat needle with a stopper, the direction that
I pick up my stitches in does matter.
So I'm going to get started picking up these stitches.
I'm going to make sure that my stitches are untwisted as I pick them up.
So this stitch here is untwisted because the right leg is in the front, so I'm just going
to pick it up like this, and this next stitch is also untwisted because the right leg is
in the front.
Same with this third stitch, doing pretty good so far.
This stitch here is twisted, and I can tell because the left leg of the stitch is in the
front of the needle.
So I'm going to untwist it by taking my right needle and going into the back of the stitch,
and when I do that, you can see that the right leg is now in the front of my needle.
So again, I'm going to go from the back of the stitch, and then just pick it right off.
So pretty easy, right?
This next stitch is untwisted, so let's just move it over.
This next stitch is twisted, so I'm going to take my right needle, go into the stitch
from the back to the front, just like that, and pick it off.
And now you can see that the right leg is in the front of the needle, which is what
I want.
So it's untwisted.
This guy is untwisted, this guy is twisted, so I'm going to go from the back to the front
and pick it off.
And now it's untwisted.
Cool.
Now, if this sort of picking it up from the back to the front is confusing to you, what
you can do is manually untwist it.
So this next stitch is twisted, so what you can do is literally take that stitch off of
your needle, turn it around, put it back onto your needle.
Now this stitch is untwisted, and I can just move it over.
So those are two ways that you can untwist your stitch.
And let's see, this guy is twisted, so again, I can manually untwist it, just like that.
Put it over to my needle, and untwisted, so it moves over, untwisted.
Cool.
So now, my stitches have moved from my safety needle onto my regular needles, and the working
yarn is close to the point.
Now my stitches are untwisted, and I can continue knitting.
Okay, so this third method for unraveling is also the safest method.
And what we're going to do is take a separate needle that's a little bit thinner than the
needle that you're using to knit with, and pick up the right leg of each stitch on a
row.
Okay?
And then, once we've picked up those stitches on the row that we want to rip back to, we're
going to unravel the yarn, and you'll see that the knitting magically stops at the row
where we've inserted our needle.
Okay, so that sounds kind of complicated, so let's just get into it and I'll show you
how it works.
So let's say I want to rip back my work down to this row.
So what I would do is I would take my needle, and I'm going to go into the right leg.
Let's see.
Sometimes your eyes will get kind of blurry, but let's see.
Can I do it?
Yes, I can.
Okay, so that's the right leg.
And you can see that the stitch is made up of a V-shape, right?
So I want to go into the right leg of that V-shape.
Here we go.
And if you're worried that you might not go into the right row, like you might go up a
row or down a row, your needle just points you to the next stitch over.
So here's the right leg of our stitch, and we're just going straight across.
So here we go, just picking up that right leg.
And if you ever get confused or your eyes are blurring, just step back from your knitting
for a second, glance outside, and let your eyes unblur.
I find that that helps me a lot.
Here's my last stitch.
Cool.
So I'm going to push my needle through, and it looks kind of funny, but you can see that
my stitches are kind of held by this little needle here.
So now is the moment of truth.
This is going to be pretty interesting.
I'm going to take my big needle off.
There we go.
Now my stitches are alive, and I'm going to start unraveling, just like this.
And you will see that my stitches will stop at the break needle.
This is pretty cool.
Pulling, pulling, pulling, and pulling, pulling, pulling, and oh my goodness, what's happening
here?
Okay, so our stitches, I think I've maybe put my needle a little bit too in the stitch
above, but let's just unravel this, and here.
It's always a little bit trickier at the edge, but here we go.
Cool.
So our break needle did what it was supposed to do.
Now all of our stitches, our live stitches, are on this little needle, and they are safe.
There was really never a moment where my stitches could have gotten lost.
And now I can transfer them back onto the big needle and continue knitting.
So this third method is a really nice way to unravel your yarn so that your yarn is
untwisted.
The right leg is in front of the needle, and it also keeps your stitches safe.
That little needle is holding onto your stitches so that they're never really loose.
And lastly, you can be very exact and unravel to the precise row that you want.
So there you go.
Three ways to unravel your stitches.
Thanks so much for watching.
If you enjoyed this video, then give it a big thumbs up.
And if you love this video, consider subscribing.
I'm Davina from sheepandstitch.com.
Happy unraveling.
Don't get it twisted.
And I'll see you next time.
Bye!