9 KNITTING TIPS You Need To Know/wool products

wool products
54 followers
7 Video Views·Oct 3, 2022
Some of these knitting tips may be familiar to you. Others may be a bit unconventional. Either way, I hope you enjoy!
If you have knitting tips that I didn't cover, please share them in the comments. Let's make the comments section a fun place for learning. Remember: sharing is caring!
Cre: Sheep & Stitch
Hey guys, today I'm going to show you nine knitting hacks that you can use in your knitting.
Maybe you know some of them, maybe you know none of them.
Either way, let's get into it.
So if you knit while commuting, you know that you can't just stuff your knitting into your
purse.
It collects dust, your keys get all messed up in it.
You've got to put it in some kind of bag to keep it safe.
Now if you don't have a fancy project bag, don't fret, because you can use a humble Ziploc
bag.
That's right.
All you need to do is punch a hole in the top of the bag and make a cut from the top
to the hole.
You only need to cut through one side of the bag.
Feed the yarn through the hole, close up the bag, and start knitting.
Just pull on the yarn and it'll feed smoothly through the hole.
And bada bing bada boom, you've got yourself a project bag.
Cheap, easy, portable, slightly waterproof, a great hack that I still use to this day.
This next hack goes out to all you chart knitters out there.
If you ever get confused about what row you're on when you're working your chart, you can
use a post-it note or washi tape to underline the row that you're on, and then just move
it up as you work your rows, so that you're always underlining the row that you're on
and covering up the rows that you've already worked.
Washi tape is a pretty and decorative tape that's kind of like masking tape, but less
sticky.
Just make sure that your washi tape doesn't lift off any ink from your chart.
If you've ever opened up a new pair of long circular needles, then you might find that
the cable is super curly and out of control.
That's because the cables have been coiled up in their package for a long time, and the
curl has kind of set into the cable.
So to uncurl the cable, just fill up a large casserole dish filled with boiling water.
Then just drop your needles into the casserole dish and watch those cables unravel and uncurl.
Wow, so magic.
The longer the needles have been coiled up, the longer it may take for them to uncurl
in the water.
So just give it some time, and if you need, you can kind of coax those curls loose with
a pair of chopsticks or a pencil.
If you find weaving in your yarn tail from your cast on a real drag, then do this instead.
So instead of weaving this leftover yarn at the end of our knitting, what we can do is
actually weave it in right into our first row.
I'm going to knit into my first stitch, and I'm going to hold this leftover yarn tail
with my working yarn just like this.
So two strands of yarn now become one.
So I'm going to knit with these two strands of yarn held together like this, and I'm just
going to knit into four or five stitches.
So now I've knit five stitches, and I can just let go of the leftover yarn now, just
leave it hanging, pick up my working yarn, and continue knitting to the end of my row.
So I've just finished my first row, and I'm going to turn my needle over.
The leftover yarn is just hanging off the end here.
I can take out a pair of scissors, snip it right off, and now I'm going to work my row
two.
And once I get to these stitches here, I can just knit right into them.
So now I've reached these stitches, and I'm just going to knit directly into those stitches.
We're just pretending like these stitches are regular old stitches.
There we are.
So that's a nice stealth way to weave in your leftover yarn into your work.
If you need to measure something post-haste and you don't have a ruler or tape measure
handy, then just use your finger.
The space from the tip of your finger to the joint is roughly one inch.
So when you need a rough measurement of your work, just use your finger until you can get
your hands on an actual ruler.
So if you need to measure, whip out that finger.
If you're working on a pattern while you're away from home, then keep it within reach
by emailing it to yourself, sending it to the cloud, or taking a photo of it so that
your pattern is always just a click away.
Woohoo!
So this next one is a good one.
So you know how with the long-tail cast-on, you have to estimate how much yarn you need
before you cast on?
And you know how sometimes you have too much yarn or too little yarn and you have to rip
back your cast-on?
Yeah, I absolutely hate when that happens.
When you've casted on more than a hundred stitches for a shawl or a blanket and you
find out you need to rip back your work, you're just like, no!
My friend, it does not need to be like that.
Take the guesswork out of the long-tail cast-on by casting on with two strands of yarn.
Mind-blowing, right?
Let's get into it.
Alright, so this hack works best with a center-pull ball of yarn or if you have two balls of yarn.
So this is what a center-pull ball looks like.
It's called this because in the center you can pull the yarn through, and you've also
got the other end of your yarn on the outside of your yarn.
So here you can see I've got two yarn strands, and they're both coming from the same ball
of yarn.
Okay, so I've got my two strands of yarn here, and what I'm going to do is make a regular
old slipknot.
And there's my little slipknot.
So I'm going to take one needle and put the slipknot onto my needle and tighten that puppy
up.
Perfect.
Okay, so now I've got two strands of yarn, and I'm just going to start casting on with
the long-tail using these two strands of yarn.
Now I'm going to ignore this slipknot, pretend it doesn't exist at all.
It's just gone.
It's dead to me.
Just pretend it's not there.
Okay, so let's say I need to cast on ten stitches.
I would just start casting on like this, and I would start counting from here.
So this is one stitch I've casted on.
Alright, so now I have casted on ten stitches, not including this slipknot.
I'm going to turn my needle over, and now I need to make a decision.
I need to decide which strand of yarn I want to knit with, because I've got two strands
of yarn coming off of my needle, right?
One is leading into the outside of my ball of yarn here.
The other one is leading into the center pull of my ball.
So I've decided that I want to knit with the center pull, so I'm going to take a pair of
scissors and snip it off, like five or six inches down, snip it off, and just roll up
the rest of this yarn here, and now I've only got one strand of yarn coming from my needle,
and that's the yarn that I want to knit with.
Cool.
So now I'm going to knit my first row until I get to this slipknot, and do not knit the
slipknot, okay?
Once we get here, I will show you what we're going to do.
I'm on the last stitch before my slipknot.
Here we go.
Once I get to this slipknot here, I'm going to take it off the needle, and then grab these
two strands of yarn and pull them.
And now you can see that our slipknot has just disappeared.
I've just pulled these two strands to tighten it up, but our slipknot is now gone.
It has disappeared.
I really just have ten stitches on my needle, and now I can just start knitting normally.
Once I've finished whatever I'm knitting, I can weave in these two yarn strands here
and of course here, and that's it.
So that's my hack for the longtail cast on.
Just use two strands of yarn.
There's no estimating of yarn, no worries, no nerves.
Nice and easy.
So you can buy stitch markers online or at your local craft store, but there are probably
stitch markers hiding in your home right now.
Not like in a creepy murder way, but like in an innocuous, it's just laying around kind
of way.
For instance, you can easily make stitch markers out of paper clips, which are super flexible,
a bit of yarn tied together in a loop, I do this all the time, a small rubber band or
a hair tie, which I also use, and even the ring from your own finger, although maybe
not your wedding ring, for obvious reasons.
Stitch markers are hiding in plain sight all around your home, again, not in a creepy way.
So the next time you need a stitch marker, you've got options all around you.
At some point you're going to want to wash your knitted items.
Your socks, your hats, your shawls, they get dirty, just like all your other clothes.
If you don't have special wool soap, you can use baby shampoo instead.
Yes, you heard that right, it's shampoo for the baby.
Think about it, wool and human hair are both made out of protein, so baby shampoo, which
has the least amount of extra ingredients, should be gentle enough for your woolen items.
I usually do a little squeeze in warm water, swish the knitting around for a few minutes,
rinse in warm water, and lay it out to dry.
That's it.
And that's a wrap on my nine favorite knitting hacks.
Which knitting hack are you going to use?
Are you going to cast on with two strands of yarn, or bring your knitting out in a Ziploc
bag?
Which hack resonated with you?
And hey, if you have a knitting hack that I didn't cover, then please share it down
below in the comments.
I would love to learn from you, and I'm sure everyone else watching would also love
to learn.
Let's make the comment section a fun place for learning and sharing knitting ideas, okay?
Like this video if you liked it, and subscribe for more videos like this one.
I'm Davina from sheepandstitch.com, thanks for watching, happy hacking, and I'll see
you next time.
Bye!
