Кроим клеевую для рукавов,спинки пальто

We lay out the lining in this way and here I have a narrow lining and I want to save it somehow So I did you see there's still 3 centimeters here So you can fold the lining not edge to edge but rather you can just tuck it in like this So as usual now we measure that is we don't measure we draw We draw outline and on the armhole we add 0.5 millimeters Raise it just a bit don't loop here add 0.5 and continue looping So now we take the collar and pin it right here Thus you can pin it so that the lining does not slip away Now we attach it together with the lining Yes it slid off it slid off very badly We'll reattach it just a little bit smaller Yes I even got a little stuck I need to decorate the fabric Now we take the scissors they disappear and we cut Now we flip our little finger So take the second piece and join it here That way everything will fit properly We take the soap and mark it like this We could do that before we attached the bumper I just wanted to see how it sticks We remove it add 2 centimeters here and cut it off Finished This is our shelf Take this I have 3 meters of lining here If it's wide you could fit into one like this She's narrow so we fit like this I will draw it so that it is not more economical to do so and then I will move it to the layer I'll show you it's easier than explaining Take the shelf and fold it that is the back We will make the back in one piece without any seams Move it here and from here We have some overlaps here we just take them and connect them together We outline Here we will have a pleat Here we add 0.5 as you said We outline everything And here we need to have a cutout We just draw it like that here Not writing The middle seam here started like this We will now cut out the lining That is a break She might not be enough so I'll take another one I had 2.5 meters here I'll take another 1 meter Yes Next Let's start from the bottom Such Next Now the wall should hold It is moving And we cut the shilts Shilts Then lower down Cutting That's how it is Bottle Shilts are actually You don't have to follow the will Shilts These are the same shapes Right And here Sleeves too We have to make a cover and a base Then we glue everything together