Today, on Workshop Edits, I'm taking the plunge into 3D Printing.
This is a mix of high level research, overview of beginner 3D printing information for noobs like myself, and the execution of my first simple project that will up my table saw safety even further.
Chapters 0:00 - Introduction 1:18 - Overview of my 3D Printer 4:53 - Recapping My Criteria 5:45 - Genesis of the 3D Printed Miter Block 7:52 - Process and Printing 8:57 - Outro
Thanks for watching! Zach
What's up guys, I'm Zach and welcome back to Workshop Edits.
Now, today's project is going to be a little bit different than what you're
used to seeing on this channel.
Instead of me building something in the shop, what I want to do is take you
through my journey, starting from just the genesis of the idea, researching all
the way through 3D printing, the first project for my shop.
Now, 3D printing has been something that's been on my list that I've wanted
to get into for a really long time, but it's kind of intimidating.
There's so many printers out there.
You see makers using all different types.
I truly still don't really understand a whole lot about them, but I did do
enough research to figure out what I could afford, what I wanted to start out
with in my shop, the types of projects that I wanted to do, whether it was
modeling fun toys and experimenting with just 3D printers in general, or building
jigs for the shop and kind of hacking your way through figuring out what you
could use in your shop that isn't really readily available for sale at
stores or online or whatever.
So this video, again, is going to be a little bit different.
So I just want to take you through that journey and then show you the first
project that I dove into, which I think is actually really cool.
I've never seen something like it.
It's going to be a project that I will have available in case you
do want to 3D print it yourself.
And so, yeah, without further ado, let's get started.
All right.
So this is my baby right here.
This is the Flashforge Adventure 3.
This thing costs about $450.
It is a great entry-level printer, having had this in the shop for about a week now.
So just a couple of features about it.
The printing platform is just under six inches by six inches by six inches, or
I think it's 150 millimeters cubed.
That's generally going to be what I found to be the beginner kind of smaller, I
don't know, desktop size 3D printer.
Readily available for people who just want to get into it.
Anything beyond that, you're going to really start to increase in your price.
And I just wasn't really willing to spend kind of beyond $500 for getting into it.
The big thing on my list for wanting to have one of these was to get something
that was fully enclosed.
This thing is in the shop.
My shop is super dusty all the time, even with dust collection, even with a big air
filter hanging and circulating the air.
And to me, I figured if it's going to get dusty, it might as well be enclosed and
protected because if you go inside this thing after having had it in here for a
week, it's really clean.
Another big thing I found in my research was one, the ambient air around 3D
printing or around the project that you're printing, if it can be maintained at a
pretty steady equilibrium, it's going to result in a better print.
So having something that is enclosed is going to help maintain the temperature
inside that printer.
Another thing is having a heated bed.
That's also auto leveling.
So this thing will heat up to like a hundred centigrade.
I think maybe a little less, I can't remember.
It doesn't really matter, but what it does is just heat up to the right
temperature by having a heated bed.
It actually results in much better overall 3D prints.
Another great thing about it is you can actually pull out the platform and it's
flexible so that you can just pop your 3D prints right off.
It's super handy.
You can just pop it right back in there, close it back up.
So this thing was super simple to set up.
I basically just popped it out of the box, plugged it in, flipped on the switch,
which is just right here, and it just powers on.
Like there's really not a whole lot else to it.
You can load filament on the side here.
One gripe I do have with this model in particular and some of the smaller
enclosed beginner 3D printers is that they only can hold half kilogram spools.
That is fine, but it's a little bit annoying because you can buy bigger
spools, like one kilogram one.
So for example, these are half kilogram spools.
This is a one kilogram one.
Twice as much material for some reason costs $15 less than this one.
Why?
I don't know.
A little bit annoying, but, uh, you know, in my research, what I found was since
this piece can pop off, there are 3D models out there that exist where you can
plug this into the side of your printer and actually expand the printing capacity.
So it's actually not a huge deal, a little bit annoying that it doesn't just
come with the capacity to do it, but the fact that you have a 3D printer that can
print things to help expand the capacity and the capability of your printer is
kind of an incredible thing that I didn't even think about until I started diving
into it.
So super cool.
Love that about it.
This thing is also wifi capable.
I haven't even set that up because I just like being around the printer and using
a USB port, which is super plug and play, literally just load a file from flash
print, which is the native software for this thing.
It will take the model that you have.
It'll line it up with the platform size that comes standard with this printer,
mount it to the platform itself in the software and create supports for it.
And then export the G code.
That G code can be loaded on a thumb drive, plugged in very simply here.
I hit build.
I pull up my thumb drive and I just hit go on the project that I want to do.
So just to recap my experience in terms of researching and figure out what I
wanted out of a 3D printer.
Wanted something that was under 500 bucks.
Wanted something that was out of the box, super simple to just kind of plug and
play something that came with its own software for splicing, which is basically
just taking the model that you are bringing into whatever 3D software you're
using and being able to divide it into layers, plug it in, export the G code and
hit print.
And this thing will do all the work for you.
Wanted something that was enclosed.
It helps with better prints.
It helps prevent all of the mechanical aspects of this thing from getting dusty
because this is in my workshop.
And I wanted something that just fit on the workbench and actually just
aesthetically looked really cool.
I feel like this is a really cool thing in my shop and kind of just like looking
over and seeing it.
All right.
So with that said, I want to take you back to the table saw and walk you through the
first project that I created on my own and 3D printed with this thing.
Let's do that.
So having had that thing in here for about a week, what I'm finding is just that not
only is having a 3D printer super useful and being able to just print out pretty
much whatever you want within a reasonable size, but it's sparking so many ideas for
me on types of jigs that I want for the shop or, you know, little knickknacks that
you can't really buy and they'd be really difficult to build out of wood because
they need to be so detailed and accurate.
So the first thing that came to mind, and I've never seen something like this.
So if it's out there, I apologize.
I swear.
I didn't steal this idea is a little permanent fixture that can slide over the
table saw fence and serve as a spacer block whenever you're doing miter cuts.
So for anybody who's not aware for doing safe miter cuts on the table saw, if you
are using your miter gauge, which slides into the miter slots like this, let's get
You generally do not want to do really long, skinny cuts on the table saw.
What will happen is by doing that with the piece, not staying directly 90
degrees, it could bind up between the fence and the blade and kick back.
Your hand could roll over the blade.
Even with a saw stop, that is incredibly dangerous and you should never do it.
Have done it before.
And I've experienced minor forms of that.
I don't do that anymore.
And I encourage you to not do that also.
So what you usually do is take a scrap piece of wood.
So this is three quarter inch wide.
You can do it with a half inch block, whatever.
And what you do is you take it and using a small clamp, you will clamp it on your
fence.
Then you will, uh, whatever length of piece you're trying to cut, you will slide
the fence over and add three quarters of an inch to it.
That way, when you're doing these cuts, you will measure it here exactly where you
want to cut it.
Then as you move forward, you'll be making that exact same cut, but you'll have
nothing riding along this fence.
It's much safer.
That's how you should do those cuts.
That's fine.
But I figured out that I could make something better.
So instead of having to keep ugly scrap blocks around and a clamp on file, I 3d
printed this.
This is a block that slides very nicely over my specific table saw fence.
This is the saw stop T glide fence.
And what it does is friction fits over it.
You can see how nicely it fits and it's got a half inch spacer on this side so that
whenever I want to do minor cuts now, instead of having to get out the clamp and
have a spacer block around, all I gotta do is take this thing and pop it back on.
So I spent the last week learning blender.
Blender is a free 3d animation modeling software.
It's mostly used for animation, but it's a great resource to be able to create STL
files, which this thing accepts.
I think it accepts a bunch of other ones, but for the sake of my own process and
projects, I'm using STL files.
So pretty simple.
I took a couple of lessons online for blender.
I learned basic functions on how to model square straight objects using a couple of
modifiers in the software.
I then was able to export that file to flash print the software that goes with
that, line it up and create the G code and plug and play.
And here it is.
Came out.
Perfect.
That is going to wrap it up for this video.
Thanks so much for watching.
I hope you enjoyed this.
I look forward to using this thing a lot more in future projects.
I don't really see me doing individual videos on me, 3d printing things.
That's not really an entertaining or educational thing I think I want to do on
this channel, but the potential to integrate this into projects, to integrate
it into new things for the shop that are just going to make my life a little bit
easier.
I, I'm just super excited for that.
So yeah, without further ado, thanks for watching.
I look forward to seeing you next time on whatever it is I'm building.
Bye Alexa, turn on the vacuum.