#DIY storage Ottoman Made of Plastic Bucket

LUANNTAZZ
63 followers
5 Video Views·Nov 22, 2020
Hey guys,
I’m super happy I’m now more comfortable on camera, maybe not exactly but I’m getting there. So this video contains time stamps if you don’t have all the time for the intro then you can skip and watch the other part of the video you are more interested in .
Time stamps
0:00 intro
02:22 tutorial
11:09 final results
I made this ottoman I have been seeing on Pinterest with just bucket. So if you intend to recreate this you won’t be needing a lot tools because I tried to make it as simple as possible my subscribers that have little or no power tools.
So this are the items need for this diy
Glue gun
Glue sticks
Fabric
Bucket
Foam
Cardboard boxes
Wood glue
Thanks for watching ❤️
Hi guys, welcome back to my channel, I'm Lucy and it's super good to have you here. I'm super excited about today's
video. I'm super excited
that i'm
Showing my face on here today because I want to make this channel more fun
And less robotic. I don't want it to just be about DIYs and only DIYs
um
straightforward I want it to
be an experience and
I want it to be fun for whoever watches my video and
Decides to come back to the channel. Please leave a comment in the comment section below telling me your suggestions on how to go about this
Fun youtube if you really want a fun youtube or you just want the straightforward
um
DIY
Kind of channel. So yeah, that's by the way. Um
From the title, you already know what we are here for or the thumbnail, but if you still don't know by now
Well, i'm here to tell you
We are going to be making an ottoman bench
from
plastic
buckets
Yeah, so if you are like me
And you store random items just because you know, you're going to definitely use them for DIYs
Then this video is for you and you need to keep watching because I bet you have plastic buckets somewhere around and even if you don't
Have plastic buckets somewhere around and you decide to buy it's not that expensive
It's not more than one dollar or two dollars to buy one and the total of
Total I spent on this DIY
Isn't more than fifteen dollars
so yeah, you're going to be on the safe side if you decide to do this DIY because
the
Actual ottoman goes for about two hundred dollars and above
for
Not too less maybe one hundred and eighty dollars
The last time I checked so if you're interested in this video, please stay tuned
stay watched till the end and please do me a favor by subscribing and
Telling me your post notification so you get notified anytime I post new videos like this
And let's head to the video already
The bucket i'll be using
um for this ottoman i'm going to go ahead and take measurements of
The three partitions at the top part of the bucket
And they are basically the same size. So I took the measurement with my masking tape
um, because obviously I
Felt like I boiling it was going to be a total waste of time. My masking tape was the closest to the size
so I transferred the masking the measurements I got from the masking tape to my phone and
I went ahead and cut off three strips
from my phone
I'll be cutting the foam for the last part of the
partition
because
there's um
A space for handle or spaces about four spaces for handle
I don't know what bucket has four spaces for handle though
But this one has four spaces for handle and those handles are about one inch
If i'm right and the foam is supposed to meet up for this for this size
So i'm going to go ahead and glue the foam to it
and
That's what i'm doing now
So this process is supposed to give us a smooth finish at the end and
It's also to make it easy to blend or add any extra add the fabric when we need to
Yeah
Because if you add the fabric to it
Without doing this step, it's basically or add the foam to start doing the step either
It's basically not going to be the same size and it's going to look very rough
After that i'm going to go ahead and glue foam to the remaining part of the bucket and
Trim off the edges
Because we're going for a smooth finish i'm going to go ahead and add or glue
Another one inch foam to cover up all the blemishes
So by the way guys I had to add the um
White paper to the floor so I don't mess up my floor
Because this glue can get really messy and sticky and all over the place
Even on the paper right is already getting very messy
So
So now i'm going to trim off the excesses and next i'm going to do is
Measure and cut a piece from the center of the foam or basically
Cut off the center of the foam so I can get the
desired
design
and next thing i'm going to do is
Throw on this fabric really really cheap fabric that I got from
um a clothes store
and I kind of wanted to use a
very stretchy fabric for
This one still wasn't that bad
But I think a stretchy fabric would do this better because you'd have completely smooth out
finish so i'm going to glue the
Fabric to the middle where I just cut out foam from and then i'm going to finish at the end
Or at the bottom of the foam i'm going to go ahead and do the same thing for the other side too
But i'm going to glue the end inside the bucket instead of
at the bottom of the bucket
Next i'm going to glue a gold reflective paper to these cover strips I already cut out
and after that is supposed to look like this and next thing i'm going to go ahead and do is
Add some glue to the back of the um
Cover strip that I already cut out and after that i'm just going to place it on my diy
And glue it there
So
Guys I added white art card to the
Bucket to the inside of the bucket to give it a smooth finish for my otto man
And then I went ahead to glue this cardboard box that I already cut out
to shape
I glued it with the cover of the
Bucket because I wanted a stronger
Cover so you could sit on it and then after that I glued this foam together
And to give it a thick feel when you sit on it
and
Then i'm going to go ahead and glue
the foam to
Cover of the bucket and i'm going to do that with my glue gun
So to finish it off i'm going to go ahead and add a piece of fabric to it and i'm going to glue the fabric to it
At the back i'm going to fold carefully
to not
Leave prints or patterns at the front part and after that i'm going to cut off the excesses and cover the rough parts
Hey
So to cover the rough part i'm going to go ahead and glue this
gold
cake tray to it
This cake tray I had
In my house for a very long time and I didn't even know I was going to finally use it and I kept it in my house
because
I knew I was going to use it for my diy and finally i'm using it
so I made two of these because
I didn't really like the one with the cover of the bucket
So I tried out one with just cardboard sheet and this is what it looks like
And you're going to see the one with just the cover of the bucket at the end of the video
Go ahead and tell me the one you prefer at the comment section below
And please don't forget to thumbs up this video and like if you haven't already done that see you in my next video. Bye
